| 1 | UTM - Tensile Strength (ASTM D638) | ₹ 2500 |
| 2 | UTM - Tensile Modulus (ASTM D638) | ₹ 2500 |
| 3 | UTM - Tensile Elongation at Break (ASTM D638) | ₹ 2500 |
| 4 | UTM - Flexural Strength (ASTM D790) | ₹ 2500 |
| 5 | UTM - Flexural Modulus (ASTM D790) | ₹ 2500 |
| 6 | UTM - Compressive Strength (ASTM D695) | ₹ 2500 |
| 7 | UTM - Compressive Modulus (ASTM D695) | ₹ 2500 |
| 8 | UTM - Shear Strength (ASTM D3518) | ₹ 2500 |
| 9 | UTM - Shear Modulus (ASTM D3518) | ₹ 2500 |
| 10 | UTM - ILSS (ASTM D2344) | ₹ 2500 |
| 11 | UTM - Peel Strength (ASTM D6862) | ₹ 2500 |
| 12 | Impact Strength - Izod impact notched (ASTM D256) | ₹ 2000 |
| 13 | Impact Strength - Charpy (ASTM D6110) | ₹ 1500 |
| 14 | Fatigue Strength - per hour (ASTM D3479) | ₹ 2000 |
| 15 | Hardness - Rockwell (ASTM D785) | ₹ 1500 |
| 16 | Hardness - Shore (ASTM D2240) | ₹ 1500 |
| 17 | Hardness - Barcol (ASTM D2583) | ₹ 1500 |
| 18 | Density (ASTM D792) | ₹ 1000 |
| 19 | Water/Moisture Absorption (ASTM D570) | ₹ 1000 |
| 20 | Water Contact Angle (hydrophilicity/hydrophobicity) (ASTM D5946) | ₹ 2000 |
| 21 | Coefficient of linear thermal expansion (ASTM D696) | ₹ 2000 |
| 22 | MFI for thermoplastics (ASTM D1238) | ₹ 2000 |
| 23 | HDT/VSP (ASTM D648/ASTM D 1525) | ₹ 4000 |
| 24 | LOI (Loss of ignition-ash content analysis) (ASTM D2584) | ₹ 1500 |
| 25 | LOI (ASTM D5630) | ₹ 1000 |
| 26 | Flammability/flame retardancy (UL 94) | ₹ 1500 |
| 27 | Matrix/Resin and Filler/fiber volume/content | ₹ 3000 |
| 28 | TGA (ASTM E1131) | ₹ 2500 |
| 29 | DSC (for Tg determination)(ASTM D3418) | ₹ 2500 |
| 30 | Viscosity (Brookfield) (ASTM D789) | ₹ 1500 |
| 31 | Mooney Viscosity (Rubber) (ASTM D1646) | ₹ 1500 |
| 32 | SEM | ₹ 4000 |
| 33 | SEM with EDAX | ₹ 5000 |
| 34 | BET Surface Area | ₹ 4000 |
| 35 | FTIR spectroscopy (matrix, filler, additive, chemical composition) | ₹ 2000 |
| 36 | UV Visible spectroscopy | ₹ 1500 |
| 37 | Proton NMR | ₹ 4000 |
| 38 | XRD | ₹ 3000 |
| 39 | GPC (number average mol wt, weight average mol wt and MWD) | ₹ 5000 |
| 40 | LOI (Limiting Oxygen Index) | ₹ 2500 |
| 41 | Vickers Hardness (microindentation) | ₹ 1000 |
| 42 | Nanoindentation Hardness - 3 indentation on 1 sample | ₹ 1000 |
| 43 | Automatic Densometer and Smoothness test | ₹ 4000 |
| 44 | Automatic Roundness test | ₹ 4000 |
| 45 | Taber Stiffness (Plastics, Rubbers and Paper Boards/Sheets) | ₹ 1000 |
| 46 | Wear test (pin on disc, per hour) | ₹ 3000 |
| 47 | Taylor Hobson’s Roundness/cylindricity (precision surface finish) | ₹ 5000 |
| 48 | Corrosion test | ₹ 2000 |
| 49 | Tear Test | ₹ 1500 |
| 50 | Gas permeability test (30 mins) | ₹ 3000 |
| 51 | Water vapour permeability test | ₹ 3000 |
| 52 | Burst strength | ₹ 2000 |
| 53 | Particle size analysis | ₹ 3000 |
| 54 | Microscope (optical) | ₹ 2000 |
| 55 | Thermal imaging camera (electro-optical) | ₹ 2000 |
| 56 | Fuel analysis (flash & fire point, heating value, density, stability) | ₹ 5000 |
| 57 | LCR meter (Dielectric constant) | ₹ 2000 |
| 58 | Electrical (Power quality, power and energy measurements) | ₹ 5000 |
| 59 | Physical properties of cement/polymer mixtures and agglomerates | ₹ 5000 |
| 60 | Cobb test (water absorption by paper and corrugated boards) | ₹ 1000 |
| 61 | Rancimat Oxidation Stability (Fats and oils) | ₹ 2500 |
| 62 | Electro Chemical Impedance Analyzer (CV, LSV, EIS) | ₹ 2000 each |
College of Engineering,Sardar Patel Rd,
Anna University,
Guindy, Chennai,
Tamil Nadu 600025
044 2235 7602
+91-9840203400
ccmdirector@annauniv.edu
ccmdirectorau@gmail.com
sangeetha@annauniv.edu
