Faculty Profile

UG/PG Degree

Sl.No. Level Degree Branch Institution University Duration Class Obtained
1. Post Graduate M.E. Production Engineering College of Engineering Guindy Anna University 1988 to 1990 First Class with Distinction
2. Under Graduate B.E. Mechanical Engineering Government College of Technology, Coimbatore Madras University 1981 to 1985 First Class

Research Degree

Sl.No. Degree Title of the Thesis Research Area Faculty Department Institution University Duration
1. Ph.D. Study on Parametric Influence on Integrity of Rapid Prototypes by Fused Deposition Modelling Manufacturing Engineering / Additive Manufacturing Faculty of Mechanical Engineering Department Of Manufacturing Engineering College of Engineering Guindy Anna University, Chennai 2001 to 2004

Area of Specialization

  • Additive Manufacturing
  • Bio-AM
  • Multi material
  • DfAM
  • AM-Quality
  • AI
  • ML

Membership in Professional Bodies

  • Life Member in Indian Society of Mechanical Engineers
  • Life Member in Indian Society for Technical Education
  • Life Member in Society for Tissue Engineering & Regenerative Medicine (India)
  • Life Member in Society for Biomaterials and Artificial Organs (India)

Present Position

Sl.No. Designation From To Department/Centre Campus
1. Professor January-2009 Till date Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai

Previous Positions

Sl.No. Designation From To Department/Centre Campus
1. Associate Professor January-2006 December-2009 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai
2. Assistant Professor December-2004 December-2005 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai
3. Lecturer Selection Grade October-2000 November-2004 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai
4. Lecturer Sr. Grade July-1998 September-2000 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai
5. Lecturer S.G. October-1990 June-1998 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai
6. Teaching Trainee October-1987 October-1990 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai

Present Additional Responsibility

Sl.No. Position From To Department/Centre Campus
1. Chairperson, Faculty of Mechanical Engineering May 2019 Till date Centre for Academic Courses College of Engineering Guindy, Anna University, Chennai

Previous Additional Responsibility

Sl.No. Position From To Department/Centre Campus
1. Head of the Department June-2011 May-2014 Anna University, Chennai College of Engineering Guindy, Anna University, Chennai

Other Employment Details

Sl.No. Work Nature Designation Institution/Industry Years of Experience
- - - - -

Research Papers Published in Journals

    1. M Jaivignesh, AS Babu, G Arumaikkannu, "In-vitro Analysis of Titanium Cellular Structures Fabricated by Direct Metal Laser Sintering", Materials Today: Proceedings , published by Elsevier . Vol. 22, pp. 2372-2377 (2020).
    2. R Prithvirajan, G Arumaikkannu, " Redesigning ECMM Fixture with Part Consolidation and DfAM Principles", Advances in Additive Manufacturing and Joining , published by Springer, Singapore. pp. 209-217 (2020).
    3. RV Duraibabu, R Prithvirajan, M Sugavaneswaran, G Arumaikkannu, "Compression behavior of Functionally Graded Cellular Materials fabricated with FDM", Materials Today: Proceedings , published by springer. Vol. 24, pp. 1035-1041 (2020).
    4. K Hariharan, G Arumaikkannu, T Ramkumar, M Selvakumar, " Material stability investigation of polyamide material before and after laser sintering", International Journal of Polymer Analysis and Characterization , published by Taylor & Francis. pp. 1-8 (2020).
    5. Rajendra Boopathy V., Sriraman A., Arumaikkannu G., "Energy absorbing capability of additive manufactured multi-material honeycomb structure", Rapid Prototyping Journal, published by Emerald Group Publishing Ltd.. Vol. 25, Issue 3, pp. 623-629 (2019).
    6. Prithvirajan R., Sugavaneswaran M., Sathishkumar N., Arumaikkannu G., "Metal bellow hydroforming using additive manufactured die: a case study", Rapid Prototyping Journal, published by Emerald Group Publishing Ltd.. (2019).
    7. K Hariharan, G Arumaikkannu, "Hydroxyapatite Coating on Selective Laser Sinter Polyamide Substrate by Electron Beam Deposition.", Journal of Polymer Materials , Vol. 35, Issue 2, (2018).
    8. Sugavaneswaran M., Arumaikkannu G., "Additive manufactured multi-material structure with directional specific mechanical properties based upon classical lamination theory", Rapid Prototyping Journal, published by Emerald Group Publishing Ltd.. Vol. 24, Issue 7, pp. 1212-1220 (2018).
    9. Hariharan K., Arumaikkannu G., "Hydroxyapatite coating on selective laser sinter polyamide substrate by electron beam deposition", Journal of Polymer Materials, published by Prints Publications Pvt. Ltd. Vol. 35, Issue 2, pp. 149-157 (2018).
    10. Alam M.S., Sugavaneswaran M., Arumaikkannu G., Mukherjee B., "An innovative method of ocular prosthesis fabrication by bio-CAD and rapid 3-D printing technology: A pilot study", Orbit, published by Taylor and Francis Ltd. Vol. 36, Issue 4, pp. 223-227 (2017).
    11. KS Lakshmi, G Arumaikkannu, " Influence of process parameters on tensile strength of additive manufactured polymer parts using taguchi method", Advances in 3D Printing & Additive Manufacturing Technologies , published by Springer, Singapore. pp. 1-7 (2017).
    12. K Hariharan, G Arumaikkannu, " Influence of Oxygen Partial Pressure on Hydroxyapatite Coating of Additive Manufactured Component by Pulsed Laser Deposition", Advances in 3D Printing & Additive Manufacturing Technologies , published by Springer, Singapore. pp. 55-64 (2017).
    13. KS Lakshmi, G Arumaikkannu, "Comparative Study of Surface Roughness Prediction for Selective Laser Sintering Process Using Multiple Regression Model and Artificial Neural Network", Int J Adv Engg Tech/Vol. VII/Issue II/April-June , Vol. 1326, pp. 1329 (2016).
    14. R Vijayanand, M Sugavaneswaran, G Arumaikkannu, "Experimental investigation on fracture resistance behavior of Additive Manufactured Multimaterial structure with corrugated interface", Proc. of 2nd Intl. conf. on progress in Additive Manufacturing (2016).
    15. N Sathishkumar, M Sugavaneswaran, G Arumaikkannu, " Investigation of sparse mode build style on material consumption, build time and compressive behaviour of additive manufactured cellular structures", 6th International & 27th All India Manufacturing Technology , (2016).
    16. K Hariharan, M Sugavaneswaran, G Arumaikkannu, "Structural, Mechanical And Invitro Study On Pulsed Laser Deposition of hydroxyapatite on Additive manufactured substrate", Proc. of 2nd Intl. conf. on progress in Additive Manufacturing (2016).
    17. S Rashia Begum, G Arumaikkannu, "Finite Element Analysis in Additive Manufactured Customised Bone Scaffold", Biomedical Research, published by Allied Academies. Vol. 26, Issue 4, pp. S29-33 (2015).
    18. K Hariharan, G Arumaikkannu, "Influence of Hydroxyapatite coated Additive Manufactured polyamide substrate on Biocompatibility.", published by Biomedical Research. (2015).
    19. K Swarna Lakshmi, G Arumaikkannu, "Evaluation of Surface Roughness in Additive Manufactured customised implant using Artificial Neural Network based on 2D Fourier transform–A Machine Vision approach", published by Biomedical Research. Vol. 26, Issue 4, pp. 34-40 (2015).
    20. SR Begum, G Arumaikkannu, "Computational fluid dynamic analysis and additive manufacturing of customised bone scaffolds", Progress in Computational Fluid Dynamics , published by Inderscience Publishers (IEL). Vol. 15, Issue 3, pp. 197-201 (2015).
    21. M Sugavaneswaran, G Arumaikkannu, "Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structure", Materials and Design , published by Elsevier. Vol. 66, pp. 29-36 (2015).
    22. Hariharan K and Arumaikkannu G, "Influence of Hydroxyapatite coated Additive Manufactured polyamide substrate on Biocompatibility", Biomedical Research, published by Allied Academies. Vol. 26, Issue 4, pp. S15-21 (2015).
    23. K. Hariharan , G. Arumaikkannu, "In Vitro Analysis of Hydroxyapatite Coated Bio-Additive Manufactured Implant", Advanced Materials Research, published by Trans Tech Publications. Vol. 845, pp. 246-250 (2014).
    24. K.Swarnalakshmi and G.Arumaikkannu, "Influence of process parameters on surface finish in customized bone implant using selective laser sintering", Advanced Materials Research , published by Trans Tech . Vol. 845, pp. 862-867 (2014).
    25. Saravanan K, Arumaikkannu G, "Influence of Reinforcement Volumetric Percentage on the Flexural Properties of Multi Material Additive Manufactured Component ", International Journal of Innovative Research in Science, Engineering and Technology , published by IEEE International Conference on Innovations in En. Vol. 3, Issue 3, pp. 1315-1320 (2014).
    26. G Arumaikkannu, P Balamurugan, "Bio Cad Modeling of Customized Exoskeleton for Rehabilitation of Myopathies and its Fabrication Using Additive Manufacturing", (2014).
    27. P Balamurugan, G Arumaikkannu, " Design for customized additive manufactured exoskeleton using bio CAD modeling", Proceedings of the international conference on innovations in engineering and technology (ICIET’14), Madurai, Tamil Nadu, India, (2014).
    28. G Arumaikkannu, M Sugavaneswaran, K Saravanan, "Influence of Reinforcement Volumetric Percentage and Aspect Ratio on Additive Manufactured Multi Material Structure in Uniaxial Loading", (2014).
    29. G Arumaikkannu, M Sugavaneswaran, K Saravanan, "Influence of Reinforcement Volumetric Percentage and", (2014).
    30. M Sugavaneswaran, G Arumaikkannu, "Modelling for randomly oriented multi material additive manufacturing component and its fabrication", Materials & Design (1980-2015), published by Elsevier. Vol. 54, pp. 779-785 (2014).
    31. Arul Kishore, A, Rashia Begum, S & Arumaikkannu, "Investigation of porosity relationship in Additive Manufactured novel bone scaffold", Applied Mechanics and Materials, Vol. 592, pp. 836-841 (2014).
    32. V Iraimudi, SR Begum, G Arumaikkannu, R Narayanan, " Design and fabrication of customised scaffold for femur bone using 3D printing", Advanced Materials Research , published by Trans Tech Publications Ltd. Vol. 845, pp. 920-924 (2014).
    33. S Rashia Begum, G Arumaikkannu, " Design, analysis and fabrication of customised bone scaffold using RP technology", International journal of computer applications in technology , published by Inderscience Publishers Ltd. Vol. 47, Issue 4, pp. 364-369 (2013).
    34. S Rashia Begum, G Arumaikkannu, " Computational Fluid Dynamic Analysis of Customised Tibia Bone Scaffold", Applied Mechanics and Materials , published by Trans Tech Publications Ltd. Vol. 330, pp. 698-702 (2013).
    35. BS Rashia, G Arumaikkannu, B Ashiq, " Modeling, Analysis and Rapid Manufacturing of Customised Tibia Bone Scaffold", Advanced Materials Research , published by Trans Tech Publications Ltd. Vol. 622, pp. 595-599 (2013).
    36. Vidyaa, V and Arumaikkannu, G, " Hybrid-design of an electro-thermally actuated polymeric Micro actuator for a microgripper ", International Journal of Mechanical and Industrial Engineering , Vol. 1, Issue 2, (2012).
    37. KR Kumar, KM Mohanasundaram, G Arumaikkannu, R Subramanian, " Artificial neural networks based prediction of wear and frictional behaviour of aluminium (A380)–fly ash composites", Tribology-Materials, Surfaces & Interfaces, published by Taylor & Francis. Vol. 6, Issue 1, pp. 15-19 (2012).
    38. KR Kumar, KM Mohanasundaram, G Arumaikkannu, R Subramanian, " Effect of particle size on mechanical properties and tribological behaviour of aluminium/fly ash composites", Science and Engineering of Composite Materials , published by De Gruyter. Vol. 19, Issue 3, pp. 247-253 (2012).
    39. KR Kumar, KM Mohanasundaram, G Arumaikkannu, R Subramanian, " Analysis of parameters influencing wear and frictional behavior of aluminum–fly ash composites", Tribology Transactions , published by Taylor & Francis Group. Vol. 55, Issue 6, pp. 723-729 (2012).
    40. Devika, D. and Arumaikkannu G, "Study on influence of Implant thickness and fixation position on implant stability using Finite Element Analysis", Journal of Biomimetics, Biomaterials and Tissue Engineering, Vol. 9, pp. 47-55 (2011).
    41. Rashia Begum, S and Arumaikkannu G, " Computational Fluid Dynamic Analysis of Customized Bone Scaffold ", International Journal of Applied Engineering Research, Vol. 6, Issue 5, pp. 685-692 (2011).
    42. V Vidyaa, G Arumaikkannu, "Hybrid design of a polymeric electrothermal actuator for microgripper", International Journal of Mechanical and Industrial Engineering , Vol. 1, Issue 2, pp. 2231-6477 (2011).
    43. K Ravi Kumar, KM Mohanasundaram, G Arumaikkannu, R Subramanian, B Anandavel, "Influence of Particle Size on Dry Sliding Friction and Wear Behavior of Fly Ash Particle-Reinforced A 380 Al Matrix Composites", European Journal of Scientific Research , Vol. 60, Issue 3, pp. 410-420 (2011).
    44. D Devika, G Arumaikkannu, " Evaluation of mechanical behaviour of bone, implant and bone–implant interface by numerical simulation of two surgical fixation procedures using finite element analysis", International journal of computer applications in technology - , published by Inderscience Publishers. Vol. 42, Issue 2, pp. 225-232 (2011).
    45. Devika, D. and Arumaikkannu G, "Finite Element Analysis and Rapid Prototyping to enhance the patient specific implant fabrication", SME Technical Paper , published by SME-USA. pp. 1-12 (2009).
    46. N Uma Maheshwaraa, G Arumaikkannu, S Gowri, "Three-dimensional reconstruction and rapid prototyping of femur bone using multiple digital X-rays", Journal of medical engineering & technology , published by Taylor & Francis. Vol. 32, Issue 1, pp. 30-39 (2008).
    47. G Arumaikkannu, M Sreeramulu, S Gowri, SA Prasad, J Bharanitharan, "Withdrawn: Mechanical Behavior of Fused Deposition Modeling Material", Journal of Materials Processing Technology , published by Elsevier. (2007).
    48. Arumaikkannu G., Sreeramulu.M and Gowri S, "Finite element analysis of parts fabricated by FDM ", Journal of Manufacturing Technology Today, Vol. 6, Issue 6, pp. 27-31 (2007).
    49. G. Arumaikkannu, S. Gowri and S. Muralikrishna, "Modeling and Simulation of Multi Response Optimization of Rapid Prototype Components", Journal of Manufacturing Technology and Research , Vol. 2, Issue 1, pp. 64-70 (2006).
    50. G Arumaikkannu, N Uma Maheshwaraa, S Gowri, " A genetic algorithm with design of experiments approach to predict the optimal process parameters for FDM", 2005 International Solid Freeform Fabrication Symposium , (2005).
    51. Arumaikkannu G,Gowri S, and Muralikrishna S, " Modeling of RP-FDM using response surface methodology to predict the influence of process parameters on porosity", Journal of Manufacturing Technology Today, Vol. 13, Issue 3, pp. 3-6 (2004).
    52. G Arumaikkannu, " Study on parametric influence on integrity of rapid prototypes by fused deposition modeling", published by Chennai .
    53. K Saravanan, G Arumaikkannu, "Influence of Reinforcement Volumetric Percentage on the Flexural Properties of Multi Material Additive Manufactured Component"

Research Papers Presented in Conferences

    1. Prithvirajan R, Blakumar C , Arumaikkannu G, "Effect of strut diameter on compressive behaviour of selective laser Sintered polyamide rhombic dodecahedron lattice" presented in a International level conference on Advances in Materials and Manufacturing Applications, organised by Department of Mechanical Engineering, Amrita School of Engineering, Bengaluru Campus, India from 29-Aug-2019 to 31-Aug-2019.
    2. Arumaikkannu G, International Conference on Progress in Additive Manufacturing (Pro-AM 2016), Singapore from 16-May-2016 to 19-May-2016.
    3. G. Arumaikkannu and P. Balamurugan, "Bio CAD Modeling of Customized Exoskeleton for Rehabilitation of Myopathies and Its Fabrication Using Additive Manufacturing" presented in a International level conference on International Conference on Progress in Additive Manufacturing (Pro-AM 2014), organised by Nanyang Technological University, Singapore from 26-May-2014 to 28-May-2014.
    4. Arumaikkannu G,"Influence of Reinforcement Volumetric Percentage and Aspect Ratio on Additive Manufactured Multi Material Structure in Uniaxial Loading" presented in a International level conference on International Conference on Progress in Additive Manufacturing (Pro-AM 2014), organised by Nanyang Technological University, Singapore from 26-May-2014 to 28-May-2014.
    5. Arumaikkannu G, "Additive Manufacturing of a novel bone scaffold and its porosity evaluation" presented in a National level conference on National conference on Emerging Trends and Innovations in Engineering and Technology (ETIET’14), organised by Dhaanish Ahmed College of Engineering, INDIA from 10-Apr-2014.
    6. Arul Kishore A, Rashia Begum S and G.Arumaikkannu, "Porosity Relationship in a novel bone scaffold manufactured using SLS technique" presented in a National level conference on National conference on Recent Advances in Mechanical Engineering (RAIME 14), organised by National Engineering College, INDIA from 28-Mar-2014.
    7. Arumaikkannu G, "Design and fabrication of customised scaffold for femur bone using 3D printing" presented in a International level conference on Materials, Industrial and Manufacturing Engineering Conference (MIMEC 2013), organised by University Tecnology Malaysia, Malaysia from 04-Dec-2013 to 06-Dec-2013.
    8. Arumaikkannu G, "Influence of process parameters on surface finish in customised bone implant using selective laser sintering" presented in a International level conference on Materials, Industrial and Manufacturing Engineering Conference (MIMEC 2013), organised by University Tecnology Malaysia, Malaysia from 04-Dec-2013 to 06-Dec-2013.
    9. K.Hariharan, G.Arumaikkannu, "In Vitro Analysis of Hydroxyapatite Coated Bio-Additive Manufactured Implant" presented in a International level conference on In Vitro Analysis of Hydroxyapatite Coated Bio-Additive Manufactured Implant, organised by University Technology, Malaysia, Malaysia from 04-Dec-2013 to 06-Dec-2013.
    10. Arumaikkannu G, "Experimental and Theoretical investigation on mechanical properties of dual material additive manufactured component" presented in a National level conference on Recent Trends in Manufacturing Technology - RTMT 13, organised by CEG, Anna University, India from 25-Apr-2013 to 26-Apr-2013.
    11. V.Iraimudi, S.Rashia Begam, G.Arumaikkannu and R.Narayanan, "Influence of part build orientation on the strength of Additive Manufactured Component" presented in a National level conference on Recent Trends in Manufacturing Technology - RTMT 13, organised by CEG, Anna University, India from 25-Apr-2013 to 26-Apr-2013.
    12. Ruban Rex P, Johnson W E, Arumaikkannu G, Anuradha Dhanasekaran., "Analysis of a novel customizable polyamide scaffold to support osteoblast differentiation Invitro bio-compatability study." presented in a National level conference on National conference on Biolife, organised by Sanjay Gandhi Postgraduate Institute of Medical Sciences, Lucknow, India from 04-Mar-2013 to 05-Mar-2013.
    13. K.Hariharan,G.Arumaikkkannu, "Effect of Hydroxyapatite powder coated implant for bone tissue Engineering "" presented in a International level conference on International conference on Additive manufacturing (AM2012), organised by Additive Manufacturing society of India, Bangalore, INDIA from 27-Aug-2012 to 28-Aug-2012.
    14. M.Sugavaneswaran,G.Arumaikkannu, "3D Polyjet Printing Technology for fabrication of customised ocular prosthesis" presented in a International level conference on International Conference on Additive Manufacturing (AM2012), organised by Additive Manufacturing society of India, Bangalore, INDIA from 27-Aug-2012 to 28-Aug-2012.
    15. V.Iraimudi,G.Arumaikkannu,S.Rashia Begum, "Development of Design pattern for customised bone scaffold" presented in a International level conference on International Conference on Additive Manufacturing (AM2012), , organised by Additive Manufacturing society of India, Bangalore, INDIA from 27-Aug-2012 to 28-Aug-2012.
    16. M.Sugavaneswaran and G.Arumaikkannu, "Image processing for computer aided ocular prosthesisand fabrication using Rapid Manufacturing Technology" presented in a National level conference on 27th National convention of Production Engineers (NCPE 2012) and National seminar on Advancements in Manufacturing - Vision 20220, organised by BIT-Mesra, Ranchi, India from 25-May-2012 to 26-May-2012.
    17. Arumaikkannu G,"Computational fluid dynamic Analysis and Fabrication of Customised Bone Scaffold using RP technology " presented in a National level conference on 27th National Convention of Production Engineers (NCPE 2012) and National Seminar on Advancements in Manufacturing – Vision 2020, organised by Department of Production Engg.BIT, Mesra, Ranchi, INDIA from 25-May-2012 to 26-May-2012.
    18. Arumaikkannu G,"Modeling And Fluid Dynamic Analysis Of Customised Bone Scaffold" presented in a National level conference on National Conference on Product Design and Manufacturing (NCPDM ‘12), organised by PSG College of Technology , Coimbatore, INDIA from 27-Apr-2012 to 27-Apr-2012.
    19. Arumaikkannu G,"Design And Finite Element Analysis Of Customised Bone Scaffold" presented in a National level conference on National Conference on Product Design and Manufacturing (NCPDM ‘12), organised by PSG College of Technology , Coimbatore, INDIA from 27-Apr-2012 to 27-Apr-2012.
    20. M.Sugavaneswaran,G.Arumaikkannu, "Fabrication of Artificial eye using Rapid Prototyping Technology" presented in a National level conference on Recent Advances in Manufacturing Engineering(RAME-2012), organised by Osmaina University- Hyderabad, INDIA from 16-Mar-2012 to 17-Mar-2012.
    21. M.Sugavaneswaran,G.Arumaikkannu, "Application of Bio-CAD Modeling and Rapid Prototyping in Design and Fabrication of Prosthesis" presented in a National level conference on National Conference on Medical Informatics (NCMI-2012), organised by AIIMS- New Delhi, INDIA from 02-Feb-2012 to 05-Feb-2012.
    22. T.Akilan,G Arumaikkannu, "Design of Tissue Engineered Scaffolds using Computer Aided Tissue Engineering" presented in a International level conference on International Conference on Recent Advances in Mechanical Engineering (INCRAME 2011), organised by Department of Mechanical Engineering,Dr.M.G.R Educational and Research Institute, Chennai, INDIA from 21-Apr-2011 to 22-Apr-2011.
    23. Arumaikkannu G, "Optimization of Patient-Specific Implant Fixation Position Using FEA and Fabrication via RP Techniques" presented in a International level conference on International Conference on Chemical ad Biomolecular Engineering (ChemBiotech’09), organised by Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore from 28-Jan-2010 to 29-Jan-2010.
    24. D. Devika G. Arumaikkannu, "Development of Mathematical Model Using Design of Experiment and Finite Element Analysis for Patient--Specific Implants by Rapid Prototyping Technique" presented in a International level conference on International Conference on Advances in Industrial Engineering Applications (ICAIEA 2010), organised by Department of Industrial Engineering, College of Engineering, Guindy campus, Anna University Chennai , India from 06-Jan-2010 to 08-Jan-2010.
    25. D. Devika G. Arumaikkannu, "Modeling and simulation of tibia leg bone to lateral impact for Configurating the patient specific fracture fixation" presented in a International level conference on International conference on latest trends in simulation, modeling and analysis (COSMA), organised by NIT, Calicut, INDIA from 17-Dec-2009 to 19-Dec-2009.
    26. P.R.Shobana Swarna ratna,G.Arumaikkannu, "A Review of Rapid Prototyping Techniques for porous 3D scaffold generation" presented in a International level conference on sixth international conference on Precision,Meso,Micro and Nano Engineering(COPEN 6), organised by PSG college of Techology,Coimbatore, INDIA from 11-Dec-2009 to 12-Dec-2009.
    27. S.Rashia Begum,G Arumaikkannu, "computational modelling of micro porous bone scaffold " presented in a International level conference on sixth international conference on Precision,Meso,Micro and Nano Engineering(COPEN 6), organised by PSG college of Techology,Coimbatore, INDIA from 11-Dec-2009 to 12-Dec-2009.
    28. M.Sugavaneswaran, G.Arumaikkannu, "A Review of Rapid Prototyping technique for porous 3D scaffold generation" presented in a International level conference on Sixth International conference on Precision, Meso, Micro and Nano Engineering (COPEN’06), organised by PSG College of Technology and Amirta School of Engineering, Coimbatore, INDIA from 11-Dec-2009 to 12-Dec-2009.
    29. G.Arumaikkannu, D.Devika, "Finite Element Analysis and Rapid Prototyping to enhance the patient specific implant fabrication" presented in a International level conference on RAPID 2009 AN INTERNATIONAL CONFERENCE , organised by Society of Manufacturing Engineers , USA, USA from 12-May-2009 to 14-May-2009.
    30. Arumaikkannu G, "Reduction in downtime of a CNC machine by preventive maintenance by simulation in MATLAB" presented in a International level conference on National conference on Emerging Trends in Engineering and Technology (SNCETET-2009), organised by Rajarajeswari Engineering College, INDIA from 11-Mar-2009 to 13-Mar-2009.
    31. D. Devika G. Arumaikkannu, "Finite Element Analysis of Human Tibia Bone for Custom Implant" presented in a International level conference on National Conference on Recent Trends in Manufacturing Technology, Department Of Manufacturing Engineering, organised by CEG Campus, Anna University, India from 06-Mar-2009 to 07-Mar-2009.
    32. G.Arumaikkannu, N.Anilkumar and M.Saravanan , "Study on the influence of rapid prototyping parameters on product quality in 3D printing" presented in a International level conference on 19th International Solid Freeform Fabrication Symposium , organised by University of Texas at Austin, USA from 04-Aug-2008 to 06-Aug-2008.
    33. G.Arumaikkannu,M.Saravanan, "Analysis of process parameters for surface finish in 3D printing process" presented in a International level conference on International Conference on Recent Advances in Materials Processing and Characterization, organised by V.R.Siddhartha Engineering College,A.P , INDIA from 03-Jul-2008 to 04-Jul-2008.
    34. G.Arumaikkannu,N.AnilKumar, "Investigating the influence of process parameters on product quality in 3D Printing" presented in a National level conference on 2nd National conference on mechanical sciences , organised by Kumaraguru college of Technology, INDIA from 27-Mar-2008 to 28-Mar-2008.
    35. Sarma P.M.,Karunamoorthy L,Jyothsna K.L.,Arumaikkannu G, "Experimental investigation and modeling of surface roughness in machining GFRP composites using Carbide inserts" presented in a International level conference on International conference and exhibition on emerging challenges in Design and Manufacturing Technologies, organised by Sathyabama University, INDIA from 28-Nov-2007 to 30-Nov-2007.
    36. G.Arumaikkannu, M.Arunachalam , "Evaluation of surface finish, form and dimensional accuracy of 3DP rapid prototypes" presented in a International level conference on 9th International symposium on measurement and quality control (9th ISMQC) , organised by IIT Madras, INDIA from 21-Nov-2007 to 24-Nov-2013.
    37. G.Arumaikkannu, K.L.Jyothsna, "Surface roughness evolution of GFRP composites after turning" presented in a International level conference on International conference on advanced design and manufacturing (ICADM 2007), organised by Sethu institute of technology, Tamilnadu, India from 09-Aug-2007 to 11-Aug-2007.
    38. G.Arumaikkannu,M. Arunachalam, "Optimization of process parameters for build time in 3DP process" presented in a International level conference on International conference on advanced design and manufacturing (ICADM 2007), organised by Sethu institute of technology, Tamilnadu, India from 09-Aug-2007 to 11-Aug-2007.
    39. G.Arumaikkannu,M Sreeramulu, "Analysis of Fused Deposition Modeling Parts" presented in a International level conference on International Conference on Computer Applications in Industry and Engineering (CAINE-2006), Las Vegas, USA from 13-Nov-2006 to 15-Nov-2006.
    40. Arumaikkannu G, "Mechanical behaviour of fused deposition modeling material" presented in a International level conference on International Conference on Advances in materials processing and characterization, organised by Anna University, Chenna, INDIA from 28-Aug-2006 to 30-Aug-2006.
    41. Arumaikkannu G, "FEA Modeling and Simulation of Orthogonal Machining Process for Ti-6al-4v Alloy" presented in a International level conference on UGC & CSIR sponsored National conference on Modeling & Simulation in Manufacturing, organised by Annamalai University, , India from 17-Mar-2006 to 18-Mar-2006.
    42. G.Arumaikkannu,MSreeramulu,S.Gowri, "Effect of Process Parameters on Mechanical Properties of Parts Fabricated By FDM" presented in a International level conference on International conference and exhibition on Total Engineering, Analysis & Manufacturing Technologies, organised by IISc Bangalore, INDIA from 28-Feb-2006 to 02-Mar-2006.
    43. Arumaikkannu G, "Effect of Process Parameters on Mechanical Properties of Parts Fabricated By FDM" presented in a International level conference on International conference and exhibition on Total Engineering, Analysis & Manufacturing Technologies, organised by IISc Bangalore, India from 28-Feb-2006 to 02-Mar-2006.
    44. M. Raja, G. Arumaikkannu, S. Ramesh, L. Karunamoorthy, "A genetic algorithm with design of experiments approach to predict the optimal process parameters for FDM" presented in a International level conference on 16th Solid Freeform Fabrication Symposium , organised by University of Texas at Austin, Austin, USA from 01-Aug-2005 to 03-Aug-2005.
    45. Arumaikkannu G, "Quantification of Surface Roughness Using image processing Technique" presented in a International level conference on International Conference on Emerging Technologies in Intelligent System and Control, EISCO 2005, organised by Kumaraguru college of technology, INDIA from 05-Jan-2005 to 07-Jan-2005.
    46. Arumaikkannu G, "Multi Response Optimization of Dimensional accuracy of Rapid prototype components" presented in a International level conference on International Conference on Emerging Technologies in Intelligent System and Control, EISCO 2005, organised by kumaraguru college of technology, INDIA from 05-Jan-2005 to 07-Jan-2005.
    47. Arumaikkannu G, "Improving the effectiveness of brakes in two wheelers" presented in a International level conference on International conference and exhibition on Total Engineering, Analysis & Manufacturing Technologies, organised by IISc Bangalore, India from 02-Nov-2004 to 04-Nov-2004.
    48. Arumaikkannu G, "Development of an automated low cost acoustic impact non-destructive testing for industrial process monitoring" presented in a International level conference on International conference and exhibition on Total Engineering, Analysis & Manufacturing Technologies, organised by IISc Bangalore, India from 02-Nov-2004 to 04-Nov-2004.
    49. Arumaikkannu G, "Effect of process parameters with surface quality constraints on RP-FDM parts" presented in a International level conference on National Conference on Design, Simulation and Modeling of Mechanical Systems, organised by JNTU, Kakinada, Andhra Pradesh, India from 07-May-2004 to 08-May-2004.
    50. Arumaikkannu G, "Effect of process parameters with surface finish constraints on RP-FDM parts" presented in a International level conference on Proceedings of National Conference on Advanced manufacturing systems, organised by Baba Banda Singh Bahadur Engineering College, Punjab, INDIA from 26-Mar-2004 to 27-Mar-2004.
    51. Arumaikkannu G, "Optimizing surface roughness and porosity of RP-FDM using Taguchi Technique" presented in a International level conference on National Conference on Modeling and Analysis of Production Systems, organised by National Institute of Technology, Tiruchirapalli, INDIA from 22-Jan-2004 to 23-Jan-2004.
    52. Arumaikkannu G, "Multi – objective optimization of fused deposition modeling process parameters using Genetic Algorithm" presented in a International level conference on International conference on CAD, CAM, Robotics and Autonomous Factories, organised by IIT, New Delhi, India from 11-Aug-2003 to 13-Aug-2003.
    53. Arumaikkannu G, "Optimizing surface quality of RP-FDM products using Taguchi’s technique" presented in a International level conference on Rapid Prototyping Society of India symposium, , organised by Bangalore, INDIA from 06-Jun-2003 to 07-Jun-2003.
    54. Arumaikkannu G, "Optimization of process parameters for RP-FDM using Taguchi’s technique" presented in a International level conference on National conference on Advances in Manufacturing Technology, organised by NSS College of Engg., Pallakad, INDIA from 15-Feb-2003 to 16-Feb-2003.
    55. Arumaikkannu G, "Fuzzy logic control algorithm for rapid prototyping – FDM process parameters" presented in a International level conference on National conference on Advances in Manufacturing Technology, organised by NSS College of Engineering, Pallakad, INDIA from 15-Feb-2003 to 16-Feb-2003.
    56. Arumaikkannu G, "Development of ANN for process optimization of RPT using FDM" presented in a International level conference on Second National Symposium on Rapid Prototyping and Rapid Tooling Technologies, organised by Bangalore, India from 15-Nov-2001 to 16-Nov-2001.
    57. Arumaikkannu G, "Software for generating pneumatic circuits for industrial automation" presented in a International level conference on Second Asian Symposium on Industrial Automation and Robotics, organised by BITEC, Bangkong, Thailand from 17-May-2001 to 18-May-2001.
    58. Arumaikkannu G, "Process optimization and design of expert system for ‘FDM’ rapid prototyping system" presented in a International level conference on Second Asian Symposium on Industrial Automation and Robotics, organised by BITEC, Bangkong,, Thailand from 17-May-2001 to 18-May-2001.
    59. Arumaikkannu G, "Development of adaptive slicing techniques for rapid prototyping – A case study" presented in a National level conference on National Seminar on Advances in Integrated Manufacturing Systems, organised by Department. of Production Technology, MIT, Anna University, Chennai from 09-Feb-2001 to 10-Feb-2001.

Organized

Sl.No. Title Type Level Role Duration
1. National workshop on AICTE Training And Learning (ATAL) Academy programme on 3D Printing and Design Workshop National Coordinator 16-Sep-2019 to 20-Sep-2019
2. National conference on Recent Trends in Manufacturing Technology RTMT 13 Conference National Chairperson 25-Apr-2013 to 26-Apr-2013
3. National Workshop on Advanced Metrology in Manufacturing Engineering(AM2E) Workshop National Convener 03-Oct-2012 to 05-Oct-2012
4. Workshop on Nanocoatings & Applications Workshop National Organiser 30-May-2011
5. National Conference on Recent Trends in Manufacturing Technology - RTMT 11 Conference National Coordinator 11-Mar-2011 to 12-Mar-2011
6. National Conference on Recent Trends in Manufacturing Technology - RTMT 09 Conference National Coordinator 06-Mar-2009 to 07-Mar-2009
7. Challenges in Rapid Prototyping Technology Seminar National Coordinator 10-Sep-2004 to 11-Sep-2004
8. Challenges in Rapid prototyping Technology Seminar National Coordinator 27-Feb-2004 to 28-Feb-2004
9. National seminar on Advanced Manufacturing Technology Seminar National Organiser 07-Mar-2003 to 08-Mar-2003

Chaired/Co Chaired

Sl.No. Title Type Level Role Institution Duration
1. International Conference on Advances in Industrial Engineering Applications Conference International Chairman College of Engineering Guindy, Anna University 06-Jan-2014 to 08-Jan-2014
2. Second International Conference on Advances in Materials Processing and characterisation (AMPC2013) Conference International Chairman Anna University, Chennai 06-Feb-2013 to 08-Feb-2013
3. Paradigm shift – Next Gen Patient Specific Craniofacial implants Seminar National Co Chairman Institute of Neurosciences & Spinal Disorders, Global Hospitals & Health City, Chennai 11-Jul-2010
4. Advances in Material Processing and Characterization Conference International Co Chairman College of Engineering Guindy Anna University, Chennai 28-Aug-2006 to 30-Aug-2006

Attended

Sl.No. Title Type Level Organising Institution Country Duration
1. Materials, Industrial and Manufacturing Engineering Conference -MIMEC (2013) conference International University Tecnology Malaysia Malaysia 04-Dec-2013 to 06-Dec-2013
2. One day seminar - Advances in Non-Conventional machining process 2013(ANMP2013) seminar National Department of Manufacturing Engineering,CEG, Anna University, India India 23-Feb-2013 to 23-Feb-2013
3. Issues in preparing research thesis and project proposal seminar National Department of Industrial Engineering,CEG,Anna University, Chennai, India India 27-Jul-2012 to 28-Jul-2012
4. Two day workshop on Indo-UK on Advanced material Engineering & Technology workshop International Department of Mechanical Engineering,CEG, Anna University, India India 27-Jul-2012 to 28-Jul-2012
5. DST-PURSE sponsored two days workshop on Recent Research Trends in Advanced Engineering Materials and Composites and its Characterisation workshop National Department of Mechanical Engineering, CEG, Anna University, India India 27-Mar-2012 to 28-Mar-2012
6. National Level Technical seminar on “Issues in Preparing Research Thesis and Project Proposal Seminar National Department of Industrial Engineering,CEG,Anna University, Chennai, India India 16-Mar-2012 to 17-Mar-2012
7. Workshop on Nanocoatings & Applications workshop National Department of Manufacturing Engineering,CEG, Anna University, India India 30-May-2011
8. National Conference on Recent Trends in Manufacturing Technology conference National Department of Manufacturing Engineering,CEG,Anna University, India India 11-Mar-2011 to 12-Mar-2011
9. Participated in 5days workshop on care communication and counselling students workshop National Center for Women Empowerment & Centre for Faculty Development, Anna UNiversity, Chennai, India India 21-Feb-2011 to 25-Feb-2011
10. Care , Communication & Counseling Students (3C’s) Workshop National Center for Women Empowerment & Centre for Faculty Development,Anna University, Chennai, India India 21-Feb-2011 to 25-Feb-2011
11. International workshop on Electromagnetic forming Technology workshop International Department of Mechanical Engineering,CEG, Anna University, India India 11-Nov-2010 to 12-Nov-2010
12. National workshop on Advances in Metrology and Measurements workshop National Department of Manufacturing Engineering,CEG, Anna University, India India 22-Oct-2010 to 23-Oct-2010
13. National Workshop on Nano Materials and its Applications NANOMAT 2010 seminar National Department of Manufacturing Engineering,CEG,Anna University, India India 20-Sep-2010 to 21-Sep-2010
14. Paradigm shift – Next Gen Patient Specific Craniofacial implants seminar National Institute of Neurosciences & Spinal Disordres,Global Hospitals & Health City , Chennai, India India 11-Jul-2010
15. Seminar on Women in Science and Technology: Career in Science & Technology seminar National Center for Women Empowerment & Women in Science(WIS),Indian Academy of Science, Bengaluru, India India 15-May-2010 to 16-May-2010
16. Two day workshop on Advances in strong materials & its applications seminar National Department of Mechanical Engineering, CEG, Anna University,India India 05-Feb-2010 to 06-Feb-2010
17. Indo-US seminar on Research Perspectives for University Excellence: A US Model for India seminar International Department of Manufacturing Engineering, Anna University, India India 10-Aug-2009
18. Rapid 2009 an International Conference conference International Society of Manufacturing Engineers, USA USA 12-May-2009 to 14-May-2009
19. National Seminar on Creativity and innovation in New product development seminar National AU-FRG Institute for CAD/CAM,Anna University, India India 24-Apr-2009 to 25-Apr-2009
20. National Seminar on Recent trends in Manufacturing Technology Conference National Department of Manufacturing Engineering,Anna University, India India 06-Mar-2009 to 07-Mar-2009
21. Advanced international workshop on Nanoscience and technology workshop International Department of Physics, Anna University, India India 23-Feb-2009 to 27-Feb-2009
22. Workshop on Biomaterials and Biomineralisation workshop International Crystal Growth Center, Anna University, India India 01-Feb-2008
23. AICTE Training programme for faculty of Engineering Colleges and Management Institutes seminar National Indian heritage academy , Bangalore, India India 04-Oct-2007 to 05-Jun-2007
24. Major aspects of energy research in India and Germany: The challenges for the future conference International Institute of Energy Studies, Anna University, Chennai, India India 20-Jun-2007 to 21-Jun-2007
25. International Conference on Advances in materials processing and characterization conference International Anna University, Chennai, India India 28-Aug-2006 to 30-Aug-2006
26. International Conference on Total Engineering, Analysis and Manufacturing Technologies conference International Indian Institute of Science , Bangalore , India India 28-Feb-2006 to 02-Mar-2006
27. Course on quantitative techniques for research in Engineering and Management Short Course National CEG, Anna University, Chennai, India India 05-Dec-2005 to 07-Dec-2005
28. Workshop on software quality and reliability workshop National CEG, Anna University, Chennai, India India 25-Nov-2005
29. International conference on Emerging technologies in intelligent system and control Conference International Kumaraguru College of Technology and CIPMAS,NUSand product development and Manufacturing centre, Oakland University,USA, India India 05-Jan-2005 to 07-Jan-2005
30. Advances in materials and manufacturing technology Seminar National CEG, Anna University, Chennai, India India 02-Apr-2004
31. Global Trends in Manufacturing Technology seminar National CEG, Anna University, Chennai, India India 25-Jul-2003
32. Short term course on Total Quality Management Short Course National CEG, Anna University, Chennai India 09-Jun-2003 to 13-Jun-2003
33. National seminar on Advanced Manufacturing Technology seminar National CEG, Anna university, Chennai India 07-Mar-2003 to 08-Mar-2003
34. National Seminar on Rapid prototyping Technologies 2002 seminar National AU-FRG Institute for CAD/CAM,Anna University, India India 18-Oct-2002 to 19-Oct-2002
35. National Seminar on IT Enabled Design & Manufacturing-Management Strategies seminar National AU-FRG Institute for CAD/CAM, Anna University, India India 03-May-2002 to 04-May-2002
36. IT enabled design and manufacturing - Management strategies seminar National Anna University, Chennai, India India 03-Apr-2002 to 04-Apr-2002
37. National Seminar on Advances in Integrated Manufacturing Systems AIMS2001 seminar National Department of Production Technology MIT campus ,Anna University, India India 02-Feb-2001 to 03-Feb-2001
38. QIP sponsored STTP on recent trends in production management Short Course National Indian Institute of Technology Madras, Chennai, India India 26-Jun-2000 to 30-Jun-2000
39. ISTE short term course on CNC programming and its operations Short Course National Anna University, Chennai, India India 20-Dec-1999 to 24-Dec-1999
40. QIP short term training programme on Quality assured manufacturing Short Course National Indian Institute of Technology Madras, Chennai , India India 20-Dec-1999 to 24-Dec-1999
41. AICTE -ISTE sponsored STTP on modeling and simulation of manufacturing systems Short Course National Anna University, Chennai, India India 06-Dec-1999 to 17-Dec-1999
42. STC on newer concepts of management techniques for teachers Short Course National Anna University, Chennai, India India 11-Oct-1999 to 16-Oct-1999
43. AICTE-ISTE sponsored STT on mechatronics - Technology for 21st century Short Course National MIT, Anna University, Chennai, India India 05-Jul-1999 to 18-Jul-1999
44. QIP STC on fuzzy set theory and its appllications Short Course National Indian Institute of Technology Madras, Chennai , India India 07-Dec-1998 to 18-Dec-1998
45. STC on aspects of nonlinear functional and applicable analysis Short Course National Indian Institute of Technology Madras, Chennai, India India 26-May-1998 to 01-Jun-1998
46. STC on CNC programming and its operations Short Course National Anna University, Chennai, India India 09-Mar-1998 to 20-Mar-1998
47. STC on formal languages, logic and graph theory Short Course National Indian Institute of Technology Madras, Chennai, India India 08-Dec-1997 to 20-Dec-1997
48. National seminar on computer integrated manufacturing seminar National Anna University, Chennai, India India 23-Mar-1995 to 24-Mar-1995
49. Winter school on desalination Short Course National Anna University, Chennai, India India 12-Dec-1994 to 24-Dec-1994
50. Madras Chapter First convention of Quality circles Short Course National QCFI and National Institution for Quality & Reliability (Madras Branch) and ABK-AOTS DOSOKAI(TamilNadu Centre), India India 21-Aug-1992 to 22-Aug-1992
51. Two day training programme on Quality circle Short Course National CEG, Anna University, Chennai, India India 03-Jan-1992 to 04-Jan-1992
52. Winter school on recent trends in petroleum technology Short Course National Anna University, Chennai, India India 10-Dec-1991 to 23-Dec-1991

On Going

Sl.No. Project Title Project Type Principle Investigator / Co-Principal Investigator / Coordinator / Co-coordinator Funding Agency Project Status Amount Department Duration
1. Polymer (powder) based Rapid Manufacturing - Principle Investigator UGC-UPE Ongoing 315 Lakhs Department of Manufacturing Engineering, CEG, Anna University, Chennai 2017-2022

Completed

Sl.No. Project Title Project Type Principle Investigator / Co-Principal Investigator / Coordinator / Co-coordinator Funding Agency Project Status Amount Department Duration
1. Rapid Prototyping - A manufacturing tool for bio-products, for orthopedics and dental application with architecture mimicking natural bone Research Principle Investigator DST-NHHID Completed Rs. 2500000.00 Department of Manufacturing Engineering, CEG, Anna University, Chennai June 2011 - May 2014
2. Novel Multi sensory Intelligent super Abrasive grinding system Research Co-coordinator AICTE TAPTEC scheme Completed Rs. 100000.00 Department of Manufacturing Engineering, CEG, Anna University, Chennai January 2002 - June 2004

Details of Ph.D Scholars/MS (By Research) Students/M.E./M.Tech. Projects/M.Sc./M.Phil. Projects as Supervisor

Sl.No. Number of Guided Ongoing
1. Ph.D Scholars 4 6
2. MS (By Research) Students 1 1
3. M.E./M.Tech. Projects 60 3
4. M.Sc./M.Phil. Projects - -

Details of Ph.D Scholars/MS (By Research) Students/M.E./M.Tech. Projects/M.Sc./M.Phil. Projects as Joint Supervisor

Sl.No. Number of Guided Ongoing
1. Ph.D Scholars - -
2. MS (By Research) Students - -
3. M.E./M.Tech. Projects - -
4. M.Sc./M.Phil. Projects - -

Details of scholars - Ongoing

Sl.No. Name of the Scholar Title Registration No. Status Capacity as Guide
1. Prithivrajan.R Study on mechanical behaviour of powder based Additive manufactured components for tooling application 17132197388 Ongoing Supervisor
2. Rupalin Biswal Study on part consolidation and design for Additive Manufacturing 17252197219 Ongoing Supervisor
3. Mohan Kumar K Investigation on mechanical behavior and energy absorption of cellular structure 18132197232 Ongoing Supervisor
4. Saravanan K Finite Element Analysis of temperature distribution in polyamide powder layer during selective laser sintering process - Ongoing Supervisor
5. Megavarthini K K Design and Development of bio compatible dental implants using Additive Manufacturing - Ongoing Supervisor
6. Sathish Kumar N Study of Rapid tooling for industry applications by using 3D printing process - Ongoing Supervisor

Details of scholars - Completed

Sl.No. Name of the Scholar Title Registration No. Status Capacity as Guide
1. Devika.D Modeling, simulation and Analysis of Patient Specific Implant for Rapid Manufacturing 2007219156 Completed Supervisor
2. Rashiya Begam.S Modeling Simulation and Analysis of Patient Specific Implant for Rapid Manufacturing 2824219710 Completed Supervisor
3. Sugavaneswaran.M Design and Fabrication of Composite Material using Additive Manufacturing Technique 1213219814 Completed Supervisor
4. Hariharan.K Study on Mechanical behaviour and in vitro analysis of Hydroxyapaite coated additive manufactured component 1114219723 Completed Supervisor

Invited Lectures

Sl.No. Level Topic Programme Institution Place Date
1. National Additive Manufacturing Multi Material Printing Additive Manufacturing IIT Madras Chennai 30-Jan-2020
2. National Surgical Strike in Medicine - Surgical Tool and Technologies of Future Medical - 2019 - Expo - Chennai 28-Jul-2019
3. National Bio-Additive Manufacturing (BAM) Indo-Norway workshop Department of Medical Physics, CEG, Anna University, Chennai Chennai 15-May-2015
4. National Additive Manufacturing in Healthcare International Conference on Additive Manufacturing & 3D Printing Vel Tech & ESCI, HILTON, Chennai Chennai 06-Feb-2015
5. National Bio CAD Modeling of Customized Exoskeleton for Rehabilitation of Myopathies and Its Fabrication Using Additive Manufacturing International Conference on Progress in Additive Manufacturing (Pro-AM 2014) Nanyang Technological University, Singapore Singapore 27-May-2014
6. International Influence of Reinforcement Volumetric Percentage and Aspect Ratio on Additive Manufactured Multi Material Structure in Uniax International Conference on Progress in Additive Manufacturing (Pro-AM 2014) Nanyang Technological University, Singapore Singapore 26-May-2014
7. National MIMICS - From Engineering and Technology to Medicine Materialise India Conference Materialise , New Delhi New Delhi 13-Feb-2014
8. National Challenges in Bio Additive Manufacturing National Conference on Challenges in Biomaterials Research Jointly organised by VIT and CSIR-CECRI, Vellore Vellore 23-Dec-2013

Details of Experience Abroad

Sl.No. Nature of Assignment Institution/Organization Country Funding Agency Duration
1. Conference Nanyang Technological University, Singapore Singapore - 16-May-2016 to 19-May-2016
2. Invited Talk Nanyang Technological University, Singapore Singapore - 26-May-2014 to 28-May-2014
3. Conference University Tecnology Malaysia Malaysia - 04-Dec-2013 to 06-Dec-2013
4. Conference Society of Manufacturing Engineering, USA USA - 12-May-2009 to 14-May-2009
5. Conference University of Texas at Austin, USA USA - 04-Aug-2008 to 06-Aug-2008

Awards

Sl.No. Title of the Award Awarding Institution Country Awarded Year
1. Best Paper Department of Industrial Engineering, College of Engineering, Guindy campus, Anna University Chennai India 2010

Representation in International/National/State Bodies

Sl.No. Level Body Capacity of representation Duration
1. National DST-TDT-Advanced Manufacturing Technologies EAC Member 14-Aug-2020 to 13-Aug-2023
1. National DST-SERB Imprint Pac Expert Member 14-Mar-2019 to 31-Mar-2022
2. - Additive Manufacturing Journal Elsevier Reviewer -
3. - Rapid Prototyping Journal Emerald Publisher Reviewer -

Patents Awarded

Sl.No. Patent Title Patent No Date Country
- - - - -

Patents Filed

Sl.No. Patent Title File No Date of Filing Country
- - - - -

Details of Books Published

Sl.No. Title of the Book Author CoAuthor 1 CoAuthor 2 Publisher Place of Publication Year of Publication
1. Advances in Additive Manufacturing and Joining, :Redesigning ECMM Fixture with Part Consolidation and DfAM Principles R. Prithvirajan G. Arumaikkannu - Springer - 2020
2. Advances in 3D Printing and Additive Manufacturing Technologies / Influence of process parameters on tensile strength of additive manufactured polymer K. Swarna Lakshmi G. Arumaikkannu - Springer Singapore - 2016
3. Advances in 3D Printing and Additive Manufacturing Technologies / Influence of oxygen partial pressure on hydroxyapatite coating of additive manufacturing K. Swarna Lakshmi G. Arumaikkannu - Springer Singapore - 2016

Extension & Outreach Programmes

Sl.No. Type of the Programme Title of the Programme Role Cross Section of Participants No. of Participants Funded by Venue Duration
1. - Women in Mechanical Engineering Speaker Govt & Govt aided school students across Tamilnadu 5000 Anna University - Department of school Education, TN - Renault Nissan Various colleges 01-Jan-2018 and 31-Dec-2020