Faculty Profile

UG/PG Degree

Sl.No. Level Degree Branch Institution University Duration Class Obtained
1. Post Graduate M.S. Mechanical Engineering Indian Institute of Technology Madras Indian Institute of Technology Madras, Chennai 2000 to 2002 First Class
2. Under Graduate B.E. Mechanical Engineering Coimbatore Institute of Technology Bharathiyar University, Coimbatore 1986 to 1990 First Class

Research Degree

Sl.No. Degree Title of the Thesis Research Area Faculty Department Institution University Duration
1. Ph.D. Investigations into honing process and surface topography of cylinder liners using multiple sensors Advanced Manufacturing Technology Faculty of Mechanical Engineering Department Of Mechanical Engineering Indian Institute of Technology Madras Indian Institute of Technology Madras, Chennai 2004 to 2008

Area of Specialization

  • Manufacturing Technology
  • Tool Condition Monitoring
  • Abrasive Waterjet Machining
  • Micro Machining
  • Composite Materials and Machining
  • Metal Cutting
  • Metal forming and Powder Metallurgy
  • Manufacturing Processes
  • Micro Gripper
  • Automation in Manufacturing

Membership in Professional Bodies

  • Fellow of Institution of Engineers (India)
  • Life Member of Indian Society for Technical Education

Present Position

Sl.No. Designation From To Department/Centre Campus
1. Professor August 2014 Till date Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai

Previous Positions

Sl.No. Designation From To Department/Centre Campus
1. Associate professor July 2012 August 2014 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai

Present Additional Responsibility

Sl.No. Position From To Department/Centre Campus
1. Director 18-05-2015 Till date Centre for Intellectual Property Rights, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai

Previous Additional Responsibility

Sl.No. Position From To Department/Centre Campus
1. Head of the Department August 2018 July 2020 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai
2. Additional Director December 2013 May 2015 Centre for Affiliation of Institutions, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
3. Deputy Director August 2012 November 2012 Centre for Technology Development and Transfer, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai

Research Papers Published in Journals

    1. A. Gopikrishnan and M. Kanthababu, "Tool condition monitoring using multiple sensors in microturning of stainless steel", International Journal of Engineering Science, Vol. 113, (2017)
    2. V. Mohankumar and M. Kanthababu, "Experimental Investigations on Depth of Cut in Abrasive Waterjet Machining of Al/B4C Metal Matrix Composites", International Journal of Engineering Research, Vol. 5, Issue 4, pp. 322-326 (2016)
    3. M. Kanthababu, M. Rajes Ram, Peter Nithin Emannuel, R. Gokul and Radhik Rammohan, "Experimental Investigations on Pocket Milling of Titanium Alloy Using Abrasive Water Jet Machining", Faculty of Mechanical Engineering (FME) Transactions, Vol. 44, Issue 133, pp. 133-138 (2016)
    4. U. Goutham, S.H. Basawaraj, G. Chakraverti and M. Kanthababu, "Experimental Investigation of Pocket Milling on Inconel 825 using Abrasive Water Jet Machining", International Journal of Current Engineering and Technology, Vol. 6, Issue 1, (2016)
    5. M. Kanthababu, J. John Razorio Jegaraj and S. Gowri, "Investigations on Material Removal Rate and surface roughness in Electrical Discharge Turning Process of Al 7075 based metal matrix composites’", Manufacturing Technology and Management, Vol. 30, Issue 3, pp. 216-239 (2016)
    6. A. Kumaravel, B. B. Siddharatan and M.Kanthabau, "Machining of metal matrix composites by Abrasive waterjet machining ", International Journal of applied Engineering Research , Vol. 10, pp. 424-430 (2015)
    7. R. Giri, M. Kanthababu "Generating complete disassembly sequences by utilising two dimensional views", International Journal of Production Research , Vol. 53, pp. 5118-5138 (2015)
    8. V. Murugabalaji, M. Kanthababu, J. Jegaraj and S. Saikumar, "Multi-objective optimization of abrasive waterjet machining process parameters using particle swarm technique", International Journal of Materials Forming and Machining Process , Vol. 1, pp. 62-79 (2015)
    9. V.Mohankumar, M.Kanthababu and R. Raveendran, "Review on Machining Aspects in Metal Matrix and Ceramic Matrix Composites using Abrasive Waterjet", Applied Mechanics and Materials, Vol. 766, pp. 643-648 (2015)
    10. A. Gopikrishnan, M. Kanthababu,Nithin Tom Mathew, S. Gowri and R. Balasubramaniam, "Multi-objective optimization in the microturning of cobalt chromium with coated and uncoated tools using the grey relational analysis", International Journal of Precision Technology, Vol. 5, pp. 44-61 (2015)
    11. M. Prakash, M. Kanthababu and K.P. Rajurkar, " Investigations on the effect of tool wear on chip formation mechanism and chip morphology using acoustic emission signal in microendmilling of aluminum alloy", International Journal of Advanced Manufacturing Technology, Vol. 77, pp. 1499-1511 (2015)
    12. V.Mohankumar and M.Kanthababu, "Experimental Investigation on Surface roughness in Abrasive waterjet Machining of Al/B4C Metal Matrix Composites.", Journal of Applied Sciences Research , Vol. 11, pp. 157-162 (2015)
    13. P.Tamizhvalavan, M.Kanthababu,S.Arivazhagan and S.Gowri, " Experimental Investigations on Material Removal Rate in Abrasive waterjet Machining of Al/B4C/zrsio4 Hybrid Metal Matrix Composites ", Journal of Applied Sciences Research, Vol. 11, pp. 144-150 (2015)
    14. A. Gopikrishnan, M. Kanthababu,R. Balasubramaniam and Prabhat Ranjan, "Tool condition monitoring in microturning of aluminium alloy using multiple sensors", Applied Mechanics and Materials , Vol. 592, pp. 796-800 (2014)
    15. A. Gopikrishnan,A.K. Nizamudheen and M. Kanthababu, "Acoustic emission signal analysis for tool condition monitoring in microturning of titanium alloy", Advanced Materials Research , pp. 31-36 (2014)
    16. M.Prakash, P.Ravisankar and M.Kanthababu, "Acoustic emission signal analysis for tool condition monitoring in micromilling of aluminium", Advanced Materials Research, pp. 25-30 (2014)
    17. A. Gopikrishnan, M. Kanthababu, R. Balasubramanian and Prabhat Ranjan, "Tool condition monitoring in microturning of aluminium alloy using multiple sensors", Applied Mechanics and Materials, Vol. 592, pp. 796-800 (2014)
    18. M. Prakash, P. Hariharan, M. Kanthababu, "Automation in CNC code generation and tool path optimization for micro-milling machine", International Journal of Innovative Research and Development, Vol. 3, Issue 5, pp. 447-455 (2014)
    19. M. Kanthababu, "Optimization of WEDM parameters for surface roughness on hybrid MMCs", Advanced Composites Letters, Vol. 23, Issue 3, pp. 61-69 (2014)
    20. M. Prakash and M. Kanthababu, " In-process tool condition monitoring using acoustic emission sensor in microendmilling", Machining Science and Technology, published by Taylor & Francis Group. Vol. 17, Issue 1, pp. 209-227 (2013)
    21. M. Kanthababu., M.S. Shunmugam and M. Singaperumal, "Multi-sensors based condition monitoring for honing of cylinder liners", International Journal of Manufacturing Research, published by Inderscience Publishers, Switzerland. Vol. 7, Issue 4, pp. 376-396 (2012)
    22. D. Sundararaman, M. Kanthababu, S. Dhanalakshmi and M. KhaderBasha, " Investigations on tribological properties of functionally graded as-cast MMC", International Journal of Advanced Materials Manufacturing and Chacterization, Vol. 1, Issue 1, pp. 42-47 (2012)
    23. D. Satishkumar, M. Kanthababu, R. Saravanan, T. Moorthy, P. Saravanan, G. Srinivasan, " Optimization of WEDM parameters on machining of Al7075 based hybrid MMCs", Advanced Composites Letters, Vol. 21, Issue 4, pp. 89-91 (2012)
    24. D. Satishkumar, M. Kanthababu, V. Vajjiravelu, R. Anburaj, N. Thirumalai Sundarrajan, and H. Arul, " Investigation of Wire Electrical Discharge Machining Characteristics of Al6063/SiCp Composites", International Journal of Advanced Manufacturing Technology, published by Spinger-Verlag. Vol. 56, Issue 9, pp. 975-986 (2011)
    25. M. Kanthababu, M.S. Shunmugam and M. Singaperumal, " Data mining approach for selection of plateau honing parameters with dual objectives", International Journal of Machining and Machinability of Materials, published by Inderscience. Vol. 8, Issue 1, pp. 167-176 (2010)
    26. M. Kanthababu., M.S. Shunmugam and M. Singaperumal, " Identification of significant parameters and appropriate levels in honing of cylinder liners", International Journal of Machining and Machinability of Materials,, published by Inderscience . Vol. 5, Issue 1, pp. 80-96 (2009)
    27. M. Kanthababu, M.S. Shunmugam and M. Singaperumal, " Tool condition monitoring in honing process using acoustic emission signals", International Journal of Automation and Control, published by Inderscience . Vol. 2, Issue 1, pp. 99-112 (2008)
    28. M. Kantha Babu and O.V. Krishnaiah Chetty, " A study on the use of single mesh size abrasives in abrasive waterjet machining", International Journal of Advanced Manufacturing Technology, published by Spinger-Verlog. Vol. 29, Issue 5, pp. 532-540 (2006)
    29. M. Kantha Babu and O.V. Krishnaiah Chetty, " Studies on abrasive waterjet machining of black granite through design of experiment", Experimental Techniques, published by Spinger. Vol. 27, Issue 5, pp. 49-54 (2003)
    30. M. Kantha Babu and O.V. Krishnaiah Chetty, "A study on recycling of abrasives in abrasive waterjet machining", Wear, published by Elsevier Science. Vol. 254, Issue 7, pp. 763-773 (2003)
    31. M. Kantha Babu and O.V. Krishnaiah Chetty, " Abrasive waterjet machining of black Granite with Garnet abrasives", Journal of the Institution of Engineers, Kolkota, published by Institution of Engineers (India). Vol. 83, Issue 11, pp. 7-14 (2002)
    32. M. Kantha Babu and O.V. Krishnaiah Chetty, "Studies on recharging of abrasives in abrasive waterjet machining", International Journal of Advanced Manufacturing Technology, published by Spinger-Verlag. Vol. 19, Issue 9, pp. 697-703 (2002)

Research Papers Presented in Conferences

    1. M. Kanthababu "Condition Monitoring of Abrasive Waterjet Milling Using Acoustic Emission and Cutting Force Signals" presented in a International level conference on AIMTDR 2018, organised by Anna University, India from 13-Dec-2018 to 15-Dec-2018
    2. M. Prakash, M. Kanthababu and S.Gowri, "Tool wear classification in microendmilling of mild steel using multi-sensor approach" presented in a International level conference on 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), organised by College of Engineering, Pune, Maharashtra, INDIA, India from 16-Dec-2016 to 18-Dec-2016
    3. V. Mohankumar, M. Kanthababu and S. Gowri, "Grey relation Analysis of AWJM process parameters for Metal Matrix Composites" presented in a International level conference on 11th Pacific Rim International Conference on Water Jet Technology (PRIC-WJT 2016), Xuzhou, China from 16-Oct-2016 to 18-Oct-2016
    4. V.Mohankumar and M.Kanthababu, "AWJ machining of metal matrix comosites" presented in a International level conference on International Conference on Modern, Intelligent and Green Manufacturing ICMIGM 2015 , organised by Erode Segunthar College of Engineering, India from 11-Dec-2015 to 12-Dec-2015
    5. V.Mohankumar and M.Kanthababu, "Experimental Investigation on MRR in Abrasive waterjet Machining of Al/B4C Metal Matrix Composites " presented in a International level conference on International Conference on Computing Techniques & Mechanical Engineering (ICCTME 2015) , Thailand from 01-Oct-2015 to 02-Oct-2015
    6. R. Chandraboopathi, G. Prabhuram and M. Kanthababu, "Explicit finite element analysis of Abrasive Particle Impact on Aluminium Alloy (AA 6063) in Abrasive WaterJet Machining" presented in a National level conference on National Conference on Recent Advancements and Innovations in Mechanical Engineering, organised by Sri Krishna College of Engineering, India from 15-Apr-2015 to 15-Apr-2015
    7. R. Gokul, Thomas Geroge, M. Naveenkumar and V. Manojnandha, "Experimental Investigation of Pocket Milling in Acrylic using Abrasive WaterJet Machining" presented in a National level conference on National Conference on Recent Advancements and Innovations in Mechanical Engineering, organised by Sri Krishna College of Engineering, India from 11-Apr-2015 to 11-Apr-2015
    8. Rajesh Ram, Peter Nithin Emmanuel, R. Gokul, M. Kanthababu and Vaddi Seshagiri Rao, "Experimental Investigation on Pocket Milling of Brass using Abrasive WaterJet Machining" presented in a National level conference on National Conference on Recent Advancements and Innovations in Mechanical Engineering, organised by Sri Krishna College of Engineering, India from 11-Apr-2015 to 11-Apr-2015
    9. R. Binoy, A. Gopikrishnan and M.Kanthababu, "Studies on the effect of different nose radius in microturning of stainless steel 316L" presented in a International level conference on International Conference on Inter Disciplinary Research in Engineering and Technology (ICIDRET), India from 09-Apr-2015 to 10-Apr-2015
    10. K.Kalapana O.V.Mytheyri and M.Kanthababu, "Review on Condition Monitoring of Abrasive Waterjet Machining Machining System" presented in a International level conference on International Conference on Robotics, Automation, Control and Embedded system-RACE 2015, India from 18-Feb-2015 to 20-Feb-2015
    11. Pradeep Kumar, Pokkunuri saikrishan chaityna, V.Mohankumar and M.Kanthababu, "Generation of cylindrical profile in Metal Matrix Composites using Abrasive waterjet Jet Turning" presented in a International level conference on International Conference on Modern, Intelligent and Green Manufacturing ICMIGM 2015, India from 07-Jan-2015 to 09-Dec-2015
    12. M. Prakash,M. Kanthababu, R. Balasubramaniam S.Gowri and John Rozario Jegaraj, "Tool condition monitoring using multiple sensors approach in the microendmilling of aluminium alloy (AA1100)" presented in a International level conference on 5th International & 26th All India manufacturing technology, design and research conference (AIMTDR), organised by IIT Guwahati, India from 23-Dec-2014 to 25-Dec-2014
    13. V.Vdiyaa S. Hosimin Thilagar M.Kanthababu R.Balasubramaniam Prabhat Rajan and V.K. Suri, "Design and devolopment of micro-collet to hold micro cylindrical components" presented in a International level conference on International Conference on Smart Materials, Structures and Systems (ISSS), organised by IISc, Bengaluru, India from 20-Nov-2014 to 21-Nov-2014
    14. M. Prakash,M. Kanthababu, V.Prasanna , R. Balasubramaniam and John Rozario Jegaraj, "Investigations on Cutting Forces Behaviour in Microendmilling of Aluminum Alloy 1100" presented in a International level conference on International Colloquium on Materials, Manufacturing and Metrology (ICMMM) , organised by IIT Madras, India from 30-Oct-2014 to 31-Oct-2014
    15. A. Gopikrishnan and M.Kanthababu, "Tool Condition Monitoring using Multiple sensors in Microturning of Stainless Steel" presented in a International level conference on International Conference on Inter Disciplinary Research in Engineering and Technology (ICIDRET), India from 05-Aug-2014 to 06-Aug-2014
    16. A.K.Nizamudheen,A. Gopikrishnan and M.Kanthababu, "Acoustic emission signal analysis for tool condition monitoring in microturning of titanium alloy" presented in a International level conference on International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID), India from 05-May-2014 to 06-May-2014
    17. P. Ravisankar,M. Prakash and M.Kanthababu, "Acoustic emission signal analysis for tool condition monitoring in microendmilling of aluminium alloy" presented in a International level conference on International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID), India from 05-May-2014 to 07-May-2014
    18. M. Kanthababu"Vibration signal analysis for tool condition monitoring in microturning of titanium alloy" presented in a International level conference on International Conference on Micro-Manufacturing, organised by Nanyang Technological University, Singapore, Singapore from 25-Mar-2014 to 28-Mar-2014
    19. M. Kanthababu"Acoustic emission signal analysis for tool condition monitoring in microturning of titanium alloy" presented in a International level conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014), organised by Ponjesly College of Engineering, Nagercoil, Tamilnadu, India from 07-Mar-2014 to 08-Mar-2014
    20. M. Kanthababu"Acoustic emission signal analysis for tool condition monitoring in microendmilling of aluminium alloy" presented in a International level conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014), organised by Ponjesly College of Engineering, Nagercoil, Tamilnadu, India from 07-Mar-2014 to 08-Mar-2014
    21. Nithin Tom Mathew and M. Kanthababu , "Multi-objective Optimization of Abrasive Water Jet Machining Process Parameters for Aluminium Alloy using Particle Swarm Technique" presented in a International level conference on 2nd International Conference on Advances in Industrial Engineering Applications (ICAIEA 2014), organised by Anna University, Chennai, India from 06-Jan-2014 to 08-Jan-2014
    22. V. Murugabalaji, M. Kanthababu and V. Jayabalan , "Machinability study on microturning of cobalt chromium" presented in a National level conference on 28th Indian Engineering Congress, organised by Institution of Engineers (India), India from 20-Dec-2013 to 22-Dec-2013
    23. M. Kanthababu"Multi-objective optimization of microturning process parameters using grey relational analysis" presented in a International level conference on International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), organised by NIT Calicut, India from 13-Dec-2013 to 15-Dec-2013
    24. Nithin Tom Mathew and M. Kanthababu , "Multi-objective optimization of microturning process parameters using particle swarm technique" presented in a International level conference on 8th American Society of Mechanical Engineers (ASME) 2013 Manufacturing Science and Engineering Conference (MSEC2013), organised by University of Wisconsin-Madison, USA from 10-Jun-2013 to 14-Jun-2013
    25. M. Kanthababu"Experimental investigation on abrasive water jet machining of stainless steel 304" presented in a National level conference on National Conference on Recent Trends in Manufacturing Technology, organised by Anna University, Chennai, India from 25-Apr-2013 to 26-Apr-2013
    26. M. Kanthababu"Experimental investigations into thermal aspects in tool based micro-end milling of Alumnium 6061" presented in a National level conference on National Conference on Recent Trends in Manufacturing Technology, organised by Anna University, Chennai, India from 25-Apr-2013 to 26-Apr-2013
    27. S. Suresh and M.Kanthababu, "Experimental investigations into thermal aspects in tool based micro-end milling of Alumnium 6061" presented in a National level conference on Recent Trends in Manufacturing Technology 2013, organised by Anna University, India from 25-Apr-2013 to 26-Apr-2013
    28. M. Kanthababu"Experimental investigation on abrasive water jet machining of aluminium LM6" presented in a National level conference on National Conference on Recent Trends in Engineering and Technology, organised by Anna University, Chennai, India from 11-Apr-2013 to 12-Apr-2013
    29. S. Nithyanandam, M. Gajendran, T. Vadivel Murugan, M. Ayyappan and M. Kanthababu , "Investigations on Material Removal Rate of Al7075/SiCp MMC Using Wire Electrical Discharge Turning Process" presented in a International level conference on 2nd International Conference on Materials Processing and Characterization, (AMPC 2013), organised by Anna University, Chennai., India from 06-Feb-2013 to 08-Feb-2013
    30. V. Vidyaa, A. Gladys Sheba Chandrakumari, S. Hosimin Thilagar, M. Kanthababu, R. Balasubramanian and V.K. Suri , "Design and analysis of electro-thermal grippers for holding micro-components" presented in a National level conference on 1st National Conference on Micro and Nano Fabrication Technologies, organised by CMTI, Bangalore, India from 21-Jan-2013 to 23-Jan-2013
    31. M. Kanthababu, J. John Razorio Jegaraj and S. Gowri , "Investigations on Material Removal Rate in Wire Electrical Discharge Turning Process for aluminium alloy 6063" presented in a International level conference on 4th International & 25th All India Manufacturing Technology, Design and Research (AIMTDR) Conference,, organised by Jadavpur University,Kolkata., India from 13-Dec-2012 to 15-Dec-2012
    32. S. Jyothsna, N. Venkatachalam, S. Divya and M. Kanthababu , "Design and Fabrication of Wire Electrical Dischage Turning Setup for Generating Helical Profiles" presented in a National level conference on 28th National Convention of Mechanical Engineers and National Seminar on Emerging Technologies in Product Development for Safe and Sustainable Mobility, India from 03-Sep-2012 to 05-Sep-2012
    33. M. Rajkumar, M. Kanthababu and S. Gowri, "Experimental Investigations on material removal rate in wire electrical discharge turning process for Al/SiCp metal matrix composite" presented in a International level conference on 37th International MATADOR Conference , organised by University of Manchester, Manchester, United Kingdom from 25-Jul-2012 to 27-Jul-2012
    34. M. Rajkumar and M.Kanthababu, "Experimental investigation on surface roughness in wire electrical discharge cylindrical turning of Al/SiC metal matrix composite " presented in a International level conference on Advances in Manufacturing Technology, organised by Chennai Institute of Technology, India from 20-Jul-2012 to 21-Jul-2012
    35. P. R. Srivathsan, P. Terrin Babu, I. Inba Thamilan, M. Rajkumar, M. Kanthababu, S. Gowri, "Experimental Investigation on Surface Roughness in Wire Electrical Discharge Turning of Al/SiCp Metal Matrix Composite" presented in a International level conference on 1st International Conference on Advances in Manufacturing Technology (ICAMT 2012), organised by Chennai Institute of Technology, Chennai, India from 15-Jun-2012 to 17-Jun-2012
    36. P.R. Srivathsan, P. Terrin Babu, and M. Kanthababu, "Experimental Investigation on Material Removal Rate and Surface Roughness in Wire Electrical Discharge Cylindrical Turning of Aluminium alloy" presented in a National level conference on Symposium on Mechanical Engineering, organised by CEG, Anna University, India from 06-Mar-2012 to 08-Mar-2012
    37. M. Rajkumar and M. Kanthababu, "Investigation on material removal rate of aluminium 360 in wire electrical discharge turning process" presented in a International level conference on 2nd International Conference on Advances in Mechanical, Manufacturing and Building Sciences (ICAMB - 2012), organised by VIT University, Vellore, India from 09-Jan-2012 to 11-Jan-2012
    38. M. Rajkumar and M. Kanthababu, "Investigation on Material Removal Rate and Surface Roughness in Wire Electrical Discharge Turning Process for Aluminium Alloy" presented in a National level conference on 26th Indian Engineering Congress, organised by Bangalore, India from 19-Dec-2011 to 20-Dec-2011
    39. M. Prakash, M. Kantha Babu and T.V. Moorthy, "Effect of microendmilling parameters on surface roughness in steel alloy" presented in a International level conference on 3rd International & 24th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, organised by A.U. College of Engineering, Andhra University, Visakhapatnam, India from 13-Dec-2011 to 15-Dec-2011
    40. T. Vasanthavanan and M. Kanthababu, "Identification of Significant Process Parameters in Wire Electric Discharge Turning Using Grey Relational and Statistical Analyses" presented in a International level conference on International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), organised by Pune, India from 10-Dec-2011 to 11-Dec-2011
    41. M. Kanthababu"Microgripper: State of the art" presented in a National level conference on National Conference on Recent Trends in Manufacturing Technology, organised by Anna University, Chennai., India from 11-Mar-2011 to 12-Mar-2011
    42. T. Vasanthavanan and M. Kanthababu , "Investigation on material removal rate of aluminium 6063 in wire electrical discharge turning process" presented in a National level conference on National Conference on Recent Trends in Manufacturing Technology, organised by Anna University, Chennai., India from 11-Mar-2011 to 12-Mar-2011
    43. Nithin Tom Mathew, M. Kanthababu M., S. Gowri, R. Edison Chandraseelan, "Selection of Machining Parameters in Microturning of Stainless Steel" presented in a International level conference on 3rd International & 24th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, organised by A.U. College of Engineering, Andhra University, Visakhapatnam, India from 13-Dec-2010 to 15-Dec-2010
    44. V. Vajjiravelu, N. Thirumalai Sundarrajan, H. Arul, R. Anburaj and M. Kanthababu, "Machining of Al-SiC metal matrix composite material using wire electrical discharge machine" presented in a National level conference on National Conference on Recent Innovations in Production Engineering,, organised by Anna University, Chennai., India from 16-Apr-2010 to 17-Apr-2010
    45. M. Prakash, M. Kanthababu and S.Gowri, "Experimental investigation on micromilling of aluminium alloy" presented in a National level conference on National Conference on Recent Innovations in Production Engineering,, organised by Anna University, Chennai., India from 16-Apr-2010 to 17-Apr-2010
    46. Nithin Tom Mathew, M. Kanthababu and T.V. Moorthy, "Machinability study of stainless steel in microturning" presented in a National level conference on National Conference on Recent Innovations in Production Engineering, organised by Anna University, Chennai., India from 16-Apr-2010 to 17-Apr-2010
    47. M. Kantha Babu, M.S. Shunmugam and M. Singaperumal, "Multi-objective optimisation of plateau honing process parameters using non-dominated sorting genetic algorithm" presented in a International level conference on 12th CIRP International Conference on Modeling of Machining Operations, , organised by Mondragon University, Spain from 07-May-2009 to 08-May-2009
    48. M. Kantha Babu, M.S. Shunmugam and M. Singaperumal, "Selection of process parameters for honing of cylinder liners using design of experiment approach" presented in a International level conference on Proceedings of 2nd International & 23rd All India Manufacturing Technology, Design and Research (AIMTDR) Conference, organised by Indian Institute of Technology Madras, Chennai, India from 15-Dec-2008 to 17-Dec-2008
    49. R. Gokul, Thomas George, M. Naveenkumar, V. Manojanadha, N. Rajesh Kumar and M. Kanthababu, "Review on Pocket Milling using Abrasive WaterJet Machining" presented in a National level conference on National Conference on Recent Trends in Manufacturing Technology, organised by Anna University, Chennai, India
    50. V. Mohankumar and M. Kanthababu, "Experimental Investigations on Depth of cut in Abrasive Waterjet Machining of Al/B4C Metal Matrix Composites" presented in a International level conference on First International Conference on Productivity Efficiency and Competitiveness in Design and Manufacturing (PECDM 2016), organised by PSG College of Technology, Coimbatore, Tamil Nadu, India

Organized

Sl.No. Title Type Level Role Duration
1 Patent search and drafting-2018 Certificate Course National Director 25th June 2018
2 Intellectual Property Rights Workshop National Director 1st - 2nd Feb 2018
3 Access to Technology for Innovations and Establishing a technology and Innovation support center Workshop National Director 7th – 8th Dec 2017
4 Effective patent drafting (PATDRAFT-2017) Certificate Course National Director 8th - 12th Nov 2017
5 Effective patent drafting (PATDRAFT-2017) Certificate Course National Director 22nd - 26th Nov 2017
6 Intellectual Property Rights Procedures and Best Practices-2017 Short Course National Director 03-May-2017 to 06-May-2017
7 Effective patent drafting (PATDRAFT-2016) Short Course National Director 23-Nov-2016 to 27-Nov-2016
8 Effective patent drafting (PATDRAFT-2016) Short Course National Director 09-Nov-2016 to 13-Nov-2016
9 Awareness programme and Interactive workshop on Intellectual Property Rights for MSME’s Short Course National - 24-Aug-2016 to 26-Aug-2016
10 Intellectual Property Rights Procedures and Best Practices Short Course National Director 27-Jul-2016 to 30-Jul-2016
11 Intellectual Property Rights Workshop National Director 26-Apr-2016 to 26-Apr-2016
12 Effective patent drafting (PATDRAFT-2016) Short Course National Director 23-Jan-2016 to 28-Jan-2016
13 Abrasive Waterjet Machining Process Seminar National Coordinator 14-Mar-2015 to 14-Mar-2015
14 International Colloquium on Materials, Manufacturing and Metrology Conference International Joint Secretary 08-Aug-2014 to 09-Aug-2014
15 Advances in Non conventional Machining processes Seminar National Organizer 23-02-2013 to 23-02-2013
16 Advances in Metrology and Measurements Workshop National Organizer 22-11-2011 to 23-11-2011
17 INDO-US Seminar on Research Perspectives for University Excellence: A US Model for India Seminar International Organizer 10-08-2009 to 10-08-2009
18 Computer Aided Drafting and Modelling using SolidWorks Workshop National Coordinator 23-10-2008 to 24-10-2008

Chaired/Co Chaired

Sl.No. Title Type Level Role Institution Duration
1 International level conference titled "International Conference on Recent Innovations in Production Engineering (RIPE-2017)" Conference International - MIT Campus, Anna University, Chennai 24-Mar-2017 to 25-Mar-2017
2 International level conference titled "International Conference on Advances in Mechanical Engineering (ICAME-2015)" Conference International Chairman University College of Engineering, Villupuram 15-Oct-2015 to 16-Oct-2015
3 International level conference titled "International Conference on Computing Techniques & Mechanical Engineering (ICCTME 2015)" Conference International Co Chairman ICCTME 2015 01-Oct-2015 to 02-Oct-2015
4 International level workshop titled "Intellecutal property Rights Awareness" Workshop International Chairman Dr.M.G.R Educational and Research Institute University 08-Jul-2015 to 08-Jul-2015
5 National level conference titled "Recent Advancements and Innovations In Mechanical Engineering" Conference National Chairman Sri Krishna college of Technology 11-Apr-2015 to 12-Apr-2015
6 International level conference titled "Advances in Material Processing and Characterisation" Conference International Co Chairman Anna University, Chennai 06-Feb-2013 to 08-Feb-2013
7 National level seminar titled "Emerging Technologies in Product Development for safe and sustainable mobility" Conference International Co Chairman IE 03-Sep-2012 to 05-Sep-2012
8 International level conference titled "Advances in Manufacturing Technology" Conference International Co Chairman Chennai Institute of Technology 15-Jun-2012 to 17-Jun-2012

Attended

Sl.No. Title Type Level Organising Institution Country Duration
1 Technology Exhibition 2020 CUM Training Programme Training Programme National CTDT, Anna University, Chennai India 27th - 29th Feb 2020
2 Indo-US Workshop on “Metal Additive Manufacturing Technology Gaps and Research Directions” Workshop National PSG Tech, Coimbatore India 16th – 18th Dec 2019
3 Internet of Things (IOT)”, AICTE Training and Learning Academy (ATAL) Training National CEG, Anna University, Chennai India 29th Oct-2nd Nov 2019
4 E-learning & MOOCs in Higher Education - National University of Delhi & CTDT, Anna University, Chennai India 14th Sep 2019
5 Smart Manufacturing & Metrology Workshop International Department of Mechanical Engineering, IIT Madras India 25th - 26th July 2019
6 Smart Manufacturing and Industry 4.0 Conference National Central Manufacturing Technology Institute (CMTI), Bangalore India 30th - 31st May 2019
7 Recent Trends in Non-Destructive Evaluations and Manufacturing Processes Workshop National Dept. of production Technology, MIT campus, Anna University, Chennai India 25th-26th April, 2019
8 AICTE Sponsored “Recent Advancement in High Speed Machining Technology and Part Inspection” - National IIT Madras India 4th-9th March 2019
9 7th International and 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018) Conference International CEG, Anna University, Chennai India 13th-15th Dec 2018
10 Quality assurance in Higher Education Institutions Workshop National CEG, Anna University, Chennai India 30th March 2018
11 DST-Purse National Seminar on “Advances in Manufacturing Technology” Seminar National CEG, Anna University, Chennai India 16th-17th March 2018
12 GIAN course on “Smart Manufacturing 1.0” Course National CEG, Anna University, Chennai India 12th-16th March 2018
13 Knowledge Feast Seminar National Chennai India 11th May 2018
14 World IP Forum Seminar National Bengaluru India 26-Apr-2017 to 28-Apr-2017
15 Internet of Things Workshop National Department of Computer Science and Engineering, Anna University, Chennai India 02-Mar-2017 to 03-Mar-2017
16 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) Conference International College of Engineering, Pune India 16-Dec-2016 to 18-Dec-2016
17 Micro and Nano Manufacturing Processes Short Course National IIT Madras, Chennai India 05-Dec-2016 to 10-Dec-2016
18 Smart Manufacturing Workshop National IIIT D&M, Kancheepuram India 03-Dec-2016 to 03-Dec-2016
19 11th Pacific Rim International Conference on Water Jet Technology Conference International Xuzhou China 16-Oct-2016 to 18-Oct-2016
20 7 Habits to Excel in Academic Performance Short Course National AU-TVS, Anna University, Chennai India 28-Aug-2016 to 28-Aug-2016
21 Intellectual Property Rights Procedures and Best Practices Short Course National Anna University, Chennai India 27-Jul-2016 to 30-Jul-2016
22 Conference on Defence Manufacturing Technologies Conference National Tamilnadu Technology Development and Promotion Center of CII, Chennai India 03-Jun-2016 to 03-Jun-2016
23 Intellectual Property Rights Workshop National Intellectual Property Rights (CIPR), Anna University, Chennai India 26-Apr-2016 to 26-Apr-2016
24 Patenting System in India Short Course National Rajiv Gandhi National Institute of Intellectual Property Management, Nagpur India 01-Feb-2016 to 05-Feb-2016
25 Certificate course on patent drafting (PATDRAFT) Short Course National CIPR, Anna University & CII, Chennai India 23-Jan-2016 to 05-Mar-2016
26 International level conference on "1st India Conference on Innovation, Intellectual property & Competition" Conference National IIM Bangalore India 07-Jan-2015 to 08-Jan-2015
27 National level workshop on "Titanium matrix Composites" Workshop National IIT Madras India 13-Dec-2013 to 13-Dec-2013
28 National level workshop on "Modern Automation Systems for Manufacturing" Workshop National PSG College of Technology, Coimbatore India 20-Oct-2013 to 26-Oct-2013
29 International level conference on "37th International MATADOR Conference" Conference International University of Manchester, UK UK 25-Jul-2013 to 27-Jul-2013
30 National level workshop on "R&D project proposals-Awareness, Needs and Benefits" Workshop National Anna University, Chennai India 28-Jun-2013 To -
31 International level conference on "8th American Society of Mechanical Engineers (ASME) 2013 Manufacturing Science and Engineering Conference (MSEC2013)" Conference International University of Wisconsin-Madison, USA USA 10-Jun-2013 to 14-Jun-2013
32 National level workshop on "Technology Exhibition" Workshop National CTDT, Anna University India 13-May-2013 to 14-May-2013
33 National level workshop on "Nano Metrology" Conference National Central Manufacturing Technology Institute, Bangalore India 20-Jan-2013 to 21-Jan-2013
34 National level workshop on "Advances in CNC Machining skill development techniques" Workshop National College of Engineering Guindy, Anna University India 02-Nov-2012 To -
35 National level seminar on "Issues in preparing research thesis and Project proposal" Seminar National Anna University, Chennai India 16-Mar-2012 to 17-Mar-2012
36 National level workshop on "Writing Effective Conference Papers" Workshop National Indian Institute of Technology, Bombay India 18-Feb-2012 to 19-Feb-2012
37 National level Short Course on "Automation and Computer applications in Manufacturing" Workshop Short Course Indian Institute of Technology, Madras India 06-Feb-2012 to 10-Feb-2012
38 National level Short Course on "Optimization Applications in Mechanical Engineering" Short Course National Indian Institute of Technology, Madras India 03-Oct-2011 to 07-Oct-2011
39 National level workshop on "Issues in Intelligent Manufacturing Systems and evolving a Developmental Frame work" Workshop National PSG Institute of Advanced studies India 14-Feb-2011 to 15-Feb-2011
40 National level workshop on "Advances in Metrology and Measurements" Workshop National Anna University, Chennai India 22-Nov-2010 to 23-Nov-2010
41 International level workshop on "Electromagnetic Forming Technology" Workshop International Anna University, Chennai India 11-Nov-2010 to 12-Nov-2010
42 National level workshop on "Eco-Freindly Welding Processes" Workshop National Annamalai University India 07-Oct-2010 to 08-Oct-2010
43 National Workshop on Nanomaterials and its applications NANOMAT 2010 Workshop National Department of Manufacturing Engineering, Anna University, Chennai India 20-09-2010 To 21-09-2010
44 National level workshop on "Nano Materials and its Applications" Workshop National Anna University, Chennai India 20-Sep-2010 to 21-Sep-2010
45 National level Short Course on "Micro Manufacturing" Short Course National Indian Institute of Technology, Kanpur India 02-Sep-2010 to 08-Sep-2010
46 National level seminar on "Composite Materiala and their Applications" Seminar National Madras Metallurgical society India 15-May-2010 To -
47 National level workshop on "Micro and Nano Fabrication" Workshop National Indian Institute of Technology, Kanpur India 22-Mar-2010 to 26-Mar-2010
48 International level seminar on "Symposia on Machine tools and Manufacturing Systems" Seminar International Indo-German Chamber of Commerce India 18-Mar-2010 to 19-Mar-2010
49 National level Short Course on "Mechatronics Integrated Technologies for Intelligent Machines" Short Course National Indian Institute of Technology, Madras India 18-Jan-2010 to 23-Jan-2010
50 National level Short Course on "Testing and Characterisation of Materials" Short Course National Indian Institute of Technology, Madras India 19-Dec-2009 to 20-Dec-2009
51 National level workshop on "Enterprise Resource Planning - A road Ahead" Workshop National Anna University, Chennai India 07-Nov-2009 to -
52 International level conference on "CIRP Conference on Modelling of Machining Operations" Workshop International Mondragon University Spain 07-May-2009 to 08-May-2009
53 National level Short Course on "Condition Monitoring of Mechanical Systems" Short Course National Gitam University India 16-Mar-2009 to 21-Mar-2009
54 National level workshop on "Advances in Lean Manufacturing and its Applications" Workshop National Anna University, Chennai India 13-Mar-2009 to 14-Mar-2009

Completed Govt. Sponsored Projects

Sl.No. Project Title Project Type Principle Investigator / Co-Principal Investigator / Coordinator / Co-coordinator Funding Agency Project Status Amount Department Duration
1. Abrasive Waterjet Machining Process for high Strength Materials Research Coordinator University Grant Commission Under SAP,Govt. of India, New Delhi Completed Rs. 56,00,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2012-2017
2. Design and development of micro systems, Optimisation of micro-machining process parameters and micro-tool condition monitoring system Research Principle Investigator Board of Research in Nuclear Sciences (BRNS),Govt. of India, Mumbai Completed Rs. 44,41,500/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2012-2015
3. Development of In-Process Tool Condition Monitoring for Mechanical Micro-Machining Using Multiple Sensors Research Principle Investigator Department of Science And Technology (DST),Govt. of India, New Delhi Completed Rs. 19,68,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2010-2014

Completed Student Innovation Projects

Sl.No. Project Title Project Type Principle Investigator / Co-Principal Investigator / Coordinator / Co-coordinator Funding Agency Project Status Amount Department Duration
1. Automatic detection of accident vehicles Student Innovation Principle Investigator Centre for Technology Development and Transfer (CTDT), Anna University, Chennai Completed Rs. 25,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2019-2020
2. Design and development of abrasive waterjet milled surfaces without any grooves Student Innovation Principle Investigator Centre for Technology Development and Transfer (CTDT), Anna University, Chennai Completed Rs. 25,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2016-2017
3. Generation of helical profiles in metal matrix composites using abrasive waterjet turning Student Innovation Principle Investigator Centre for Technology Development and Transfer (CTDT), Anna University, Chennai Completed Rs. 25,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2015-2016
4. Design and Development of Bat Ornithopter Student Innovation Principle Investigator Centre for Technology Development and Transfer (CTDT), Anna University, Chennai Completed Rs. 25,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2012-2013
5. Generation of helical profiles in hybrid metal matrix composites using wire electrical discharge turning process Student Innovation Principle Investigator Centre for Technology Development and Transfer (CTDT), Anna University, Chennai Completed Rs. 25,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2011-2012
6. Design and development of wire electrical discharge turning set-up in wire electrical discharge machine Student Innovation Principle Investigator Centre for Technology Development and Transfer (CTDT), Anna University, Chennai Completed Rs. 25,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2010-2011
7. Design and fabrication of humanoid robot for waste management Student Innovation Principle Investigator Centre for Technology Development and Transfer (CTDT), Anna University, Chennai Completed Rs. 25,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 2009-2010

Details of Ph.D Scholars/MS (By Research) Students/M.E./M.Tech. Projects/M.Sc./M.Phil. Projects as Supervisor

Sl.No. Number of Guided Ongoing
1. Ph.D Scholars 4 5
2. MS (By Research) Students 1 -
3. M.E./M.Tech. Projects 25 2
4. M.Sc./M.Phil. Projects - -

Details of Ph.D Scholars/MS (By Research) Students/M.E./M.Tech. Projects/M.Sc./M.Phil. Projects as Joint Supervisor

Sl.No. Number of Guided Ongoing
1. Ph.D Scholars - -
2. MS (By Research) Students - -
3. M.E./M.Tech. Projects - -
4. M.Sc./M.Phil. Projects - -

Details of scholars - Ongoing

Sl.No. Name of the Scholar Title Registration No. Status Capacity as Guide
1. V.Mohankumar Abrasive waterjet machining of metal matrix composites 1413219746 Ongoing Supervisor
2. R.Prabhu Condition monitoring nozzle wear in abrasive waterjet machining 16122197223 Ongoing Supervisor
3. U.Goutham Abrasive waterjet milling 16192197237 Ongoing Supervisor
4. K.R.Sunilkumar Condition monitoring of focusing nozzle wear during abrasive waterjet machining using multiple sensors 17142197387 Ongoing Supervisor
5. M.R.Manivasagam Investigations on cold metal transfer welding 18152197226 Ongoing Supervisor

Details of scholars - Completed

Sl.No. Name of the Scholar Title Registration No. Status Capacity as Guide
1. Nithin Tom Mathew Performance evaluation of coated and uncoated micro-tools in micro-turning using tool condition monitoring 1015218101 Completed Supervisor
2. M.Prakash Tool conditioning monitoring in micro-endmilling using multiple sensor approach 1013219111 Completed Supervisor
3. A.Gopikrishnan Multi-objective optimisation and tool conditioning monitoring in microturning of Titanium alloy using multiple sensor 1114319723 Completed Supervisor
4. R.Giri Optimal assembly sequence generation of products from CAD 1015219112 Completed Supervisor
5. V.Vidyaa Design and performance evaluation of additively manufactured metal and polymer microgrippers 1224219812 Completed Supervisor

Invited Lectures

Sl.No. Level Topic Programme Institution Place Date
1. National Preparation of Research Proposal and Funding Agencies Seminar Mahendra Engineering College, Namakkal Namakkal 14-Dec-2016
2. National Converting Academic Research to Intellectual Property Seminar BS Abdur Rahman University, Chennai Chennai 03-Dec-2016
3. National Intellectual Property Rights & Innovations Seminar Rajalakshmi Institute of Technology, Chennai Chennai 26-Sep-2016
4. National Intellectual Property Rights & Innovations Seminar P.A.College of Engineering and Technology, Pollachi Pollachi 09-Sep-2016
5. National Intellectual Property Rights Seminar Kumaraguru College of Technology, Coimbatore Coimbatore 08-Sep-2016
6. National Intellectual Property Rights Seminar Rangasamy College of Technology, Tiruchengode Tiruchengode 06-Aug-2016
7. National Engineering Graphics FDTP University College of Engineering, ARNI ARNI 16-May-2015
8. National Tool Condition Monitoring AICTE Sponsored Two Weeks Faculty Development programme on Mechatronics College of Engineering, Chennai Chennai 07-Dec-2013
9. National Intelligent Manufacturing System AICTE Sponsored Two Weeks Faculty Development programme on Mechatronics SSN College of Engineering, Chennai Chennai 07-Dec-2013
10. National User Friendly Engineering Graphics TEQIP Sponsored Faculty Development programme on Engineering Graphics Anna University, Chennai Chennai 26-Jul-2013
11. National Abrasive Waterjet Machining Process Seminar Nehru Institute of Technology, Coimbatore Coimbatore 20-Jul-2013
12. National Tool Condition Monitoring AICTE sponsored Recent Research and Development in Manufacturing Processes M.A.M College of Engineering, Trichy Trichy 04-May-2013
13. National Abrasive Waterjet Machining AICTE sponsored Recent Research and Development in Manufacturing Processes M.A.M College of Engineering, Trichy Trichy 04-May-2013
14. National Abrasive water jet machining Seminar Anna University, Chennai Chennai 23-Feb-2013
15. National Advanced Machining Processes DRDO sponsored workshop Sri Krishna College of Technology, Coimbatore Coimbatore 19-Jan-2013
16. National Intelligent Manufacturing Seminar Hindusthan College of Engineering and Technology, Coimbatore Coimbatore 21-Mar-2012
17. National How to do Literature survey Faculty Development programme Karpaga Vinayaga College of Engg. and Tech., Kanchipuram Kanchipuram 03-Sep-2011
18. National Abrasive Waterjet Machining Guest lecture Rajalakshmi Engg. College, Chennai Chennai 10-Feb-2011
19. National Metal Matrix Composites and its applications National Workshop on Advanced Manufacturing Technologies St Peters Engg. College, Chennai Chennai 16-Aug-2010
20. National Optimization of process and product design Seminar IIT Madras, Chennai Chennai 27-Oct-2003

Details of Experience Abroad

Sl.No. Nature of Assignment Institution/Organization Country Funding Agency Duration
- - - - - -

Awards

Sl.No. Title of the Award Awarding Institution Country Awarded Year
1. Industrial Design (No. 281165 dated 4/3/16) Indian Patent Office India 2016
2. International Travel Grant Department of Science and Technology, New Delhi India 2013
3. INSA Visiting Fellowship Indian National Science Academy India 2012
4. Best Design and Fabrication Project Anna University Chennai India 2011
5. KCP Endownment Prize Anna University Chennai India 2011
6. Mission 1OX certificate in Teaching and Learning WIPRO India 2010
7. High Impact Teaching Skills Dale Carnegie and Wipro India 2009
8. Certificate of Merit Institution of Engineers India 2004
10. Outstanding Results achieved University Examinations India 2003
11. Business English Certificate 2 University of Cambridge - 2001
12. Excellence in Teaching - - 1999

Representation in International/National/State Bodies

Sl.No. Level Body Capacity of representation Duration
- - - - -

Patents Awarded

Sl.No. Patent Title Patent No Date Country
- - - - -

Patents Filed

Sl.No. Patent Title File No Date of Filing Country
1. Condition monitoring system for focusing nozzle 2147483647 12-May-2017 India
2. Condition monitoring system for focusing nozzle 2147483647 12-May-2017 India
3. Smart seat belt system 2147483647 16-Jun-2016 India
4. Focusing nozzle condition monitoring system 2147483647 27-May-2016 India
5. Focusing nozzle condition monitoring of abrasive 2147483647 27-May-2016 India
6. Mechanical grippers for handling plurality of micr 2147483647 15-Feb-2016 India

Details of Books Published

Sl.No. Title of the Book Author CoAuthor 1 CoAuthor 2 Publisher Place of Publication Year of Publication
1. "Basic Civil and Mechanical Engineering" Dr.M.Kanthababu - - Dhanalakshmi publishers Chennai 2013
2. "Multi-Objective Optimization of Manufacturing Processes Using Evolutionary Algorithms" Dr.M.Kanthababu - - IGI Global publications USA 2012

Extension & Outreach Programmes

Sl.No. Type of the Programme Title of the Programme Role Cross Section of Participants No. of Participants Funded by Venue Duration
- - - - - - - - -