Faculty Profile

UG/PG Degree

Sl.No. Level Degree Branch Institution University Duration Class Obtained
1. Post Graduate M.E. Industrial Engineering Thiagarajar College of Engineering Madurai Kamaraj University, Madurai 1997 to 1998 First Class
2. Under Graduate B.E. Mechanical Engineering Tamilnadu College of Engineering Bharathiyar University, Coimbatore 1993 to 1997 First Class

Research Degree

Sl.No. Degree Title of the Thesis Research Area Faculty Department Institution University Duration
1. Ph.D. Heuristics For Static Multilevel Assembly Job Shop Scheduling Scheduling, Metaheurisitics, Optimization, Simulation Faculty of Mechanical Engineering Department Of Industrial Engineering College of Engineering Guindy Anna University, Chennai 2001 to 2008

Area of Specialization

  • Bio Composites Characterization
  • Machining
  • Scheduling
  • Optimization
  • Simulation

Membership in Professional Bodies

  • ISTE
  • International Association of Engineers

Present Position

Sl.No. Designation From To Department/Centre Campus
1. Professor July-2019 Till date Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai

Previous Positions

Sl.No. Designation From To Department/Centre Campus
1. Associate Professor December-2012 July-2019 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai
2. Assistant Professor October-2008 December-2012 Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai

Present Additional Responsibility

Sl.No. Position From To Department/Centre Campus
1. Coordinator - Till date SC/ST Cell, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai

Previous Additional Responsibility

Sl.No. Position From To Department/Centre Campus
1. Chief Superintendent for PG Examinations - - Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai
2. Treasurer, Association Of Manufacturing Engineers - - Department of Manufacturing Engineering College of Engineering Guindy, Anna University, Chennai
3. Attestation Officer, Transcript - - Controller of Examinations Anna University, Chennai
4. Coordinator - - Equal Opportunity Cell Anna University, Chennai

Other Employment Details

Sl.No. Work Nature Designation Institution/Industry Years of Experience
- - - - -

Research Papers Published in Journals

    1. Selvakumar Kathiresan and Omkumar Meenakshisundaram"Effect of Fiber Composition on the Physical, Mechanical and Thermal Behavior of Jute and Human Hair Reinforced Epoxy Composites", Journal of Testing and Evaluation, (2019)
    2. Kathiresan Selvakumar, Omkumar Meenakshisundaram, "Mechanical and dynamic mechanical analysis of jute and human hair-reinforced polymer composites", Polymer Composites, published by Wiley Blackwell. Vol. 40, Issue 3, pp. 1132-1141 (2019)
    3. Girisankar, S., Omkumar, M., "Investigation on the hard turning in enhancing the surface reliability by white layer elimination using cbn semi worn-out inserts under shielding gas atmosphere", Journal of Mechanical Science and Technology, published by Springer. Vol. 33, Issue 5, pp. 2345-2352 (2019)
    4. Ramesh Kumar, C., Omkumar, M., "Optimisation of Process Parameters of Chemical Mechanical Polishing of Soda Lime Glass", Silicon, published by Springer. Vol. 11, Issue 1, pp. 407-414 (2019)
    5. Girisankar, S., Omkumar, M., "A Study on the Efficacy of Hard Turning (HT) Process in Enhancing the Surface Reliability by White Layer Elimination Using CBN Inserts Under Protective Gas Mixture Atmosphere", Journal of the Chinese Society of Mechanical Engineers, , published by Transactions of the Chinese Institute of Engineers. (2018)
    6. Muthuraman, P., Omkumar, M., "Processing and characterization of aluminium-nano iron composite preforms during cold upsetting", Journal of the Balkan Tribological Association, Vol. 24, Issue 2, pp. 230-242 (2018)
    7. M. Ravichandran, A. Manikandan, M. S. Omkumar, "Investigations on Properties of Al B4C Composites Synthesized through Powder Metallurgy Route'", Applied Mechanics and Materials, published by Trans Tech Publications,. Vol. 852, pp. 16-20 (2016)
    8. M.Omkumar & S.Girisankar, "Performance Evaluation Of Hard Turning For AISI M2 Die Steel With coated And Non-Coated CBN Inserts", Applied Mechanics and Materials, published by Trans Tech Publications,. Vol. 766, pp. 594-599 (2015)
    9. Om Kumar, Venkatraman.B, Ganesan.G, Hariharan .P, Ramagopal V Sarepaka, "Machining zone Area in Single Point Diamond Turning", nternational Journal of Applied Engineering Research, ISSN 0973-4562, Vol. 10, Issue 2, pp. 1477-1479 (2015)
    10. S Abdul Kalam , A. Azad , Om Kumar, Giri Sankar,R.Vajubunnisa Begum, " Elimination of White Layer formation during Hard Turning of AISI D3 Steel to improve Fatigue life", IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN:, Vol. 12, Issue 3, pp. 7-14 (2015)
    11. M Om Kumar ,Suresh babu, A A Jacob Moses, " Preparation and Characterization of Leather Polymer Composites", International level conference on 20th International Conference on Composite Materials(ICCM 20), pp. 1-6 (2015)
    12. Ravianandan M, M Omkumar, "Hybrid Flow Shop Scheduling using Improved Hybrid ACO Cuckoo Algorithm to Minimize Makespan", INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS, Vol. 115, Issue 18, pp. 1-20 (2015)
    13. Saravanamuthu M, Omkumar M, Senthil Kumar V, Krishnamoorthy S, " Implementation Of Six Sigma Techniques In Load Conscious Regulating Valve Assembly Line", International Journal of Mechanical And Production Engineering, published by IRAJ. Vol. 2, Issue 4, pp. 42-45 (2014)
    14. Om Kumar ,Jayant Kumar ,Ramgopal V Sarepaka, "Mathematical Formulation for the Estimation of Volumetric Heat Transfer in Precision Machining Operations", pp. 132-134 (2014)
    15. M Om Kumar, N. Karthikeyan, " Heuristics for Inventory Optimization in a Hybrid Shop", International Conference on Manufacturing Systems Engineering (ICMSE), At Venice, Italy, pp. 664-669 (2013)
    16. M. Omkumar and P. Shahabudeen, "Ant Colony Optimisation for multi-level assembly job shop scheduling", International Journal of Manufacturing Research, published by Inderscience Publishers. Vol. 4, Issue 4, pp. 410-427 (2009)
    17. M. Omkumar, P. Shahabudeen, S. Gughan, A. Azad, "GA based static scheduling of multilevel assembly job shops", International Journal of Operational Researc, published by Inderscience Publishers. Vol. 4, Issue 2, pp. 197-213 (2009)

Research Papers Presented in Conferences

    1. M.Omkumar A.Suresh Babu, Jacob Moses Anbiah,"Mechanical Characterization of Pineapple Leaf Fiber Reinforced Epoxy Composites Filled with Corn Husk Powder" presented in a International level conference on 4th Brazilian Conference on Composite Materials, organised by BCCM, Brazil, Reo De Janero, Brazil from 22-Jul-2018 to 25-Jul-2018
    2. Omkumar M"Wet Combustion and Hydrolysis Synthesis of Nano Cerium Oxide Abrasive for Chemical Mechanical polishing on Soda Lime Glass substrates" presented in a International level conference on Proceedings of an International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems (CDAMIES2018), organised by NIT, Trichy, India from 18-Jan-2018 to 20-Jan-2018
    3. Rameshkumar C and Omkumar M, "Fabrication and Characterization of Animal Fiber Reinforced Polymer Composites" presented in a International level conference on Proceedings of an International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems (CDAMIES2018), organised by NIT-Trichy, India from 18-Jan-2018 to 20-Jan-2018
    4. Omkumar M and Selvakumar K, "Effect of Machining Parameters on Surface Quality in Drilling of Natural Fiber Reinforced Polymer Composites" presented in a International level conference on ”, International Conference on Composite Materials: (ICCM21). , organised by Chinese Society of Composite Materials, China from 20-Aug-2017 to 25-Aug-2017
    5. Omkumar M"Investigation of Material Removal and Surface Roughness of Soda Lime Optical Glass Polishing Using Cerium Oxide" presented in a International level conference on Proceedings of an International Conference on Recent Trends in Production Engineering (RIPE 2017), organised by MIT, Anna University, Chennai, India from 24-Mar-2017 to 25-Mar-2017
    6. Omkumar M"Scope of Sterculia Foetida in Composites" presented in a International level conference on Proceedings of an International Conference on Recent Trends in Production Engineering (RIPE 2017), organised by MIT, Anna University, Chennai, India from 24-Mar-2017 to 25-Mar-2017
    7. Rameshkumar C and Omkumar M, "Characterization of Human Hair Fiber Reinforced Polymer Composites" presented in a International level conference on Proceedings of an International Conference on Recent Trends in Production Engineering (RIPE 2017), organised by MIT, Anna University, Chennai, India from 24-Mar-2017 to 25-Mar-2017
    8. Omkumar M"Nano level form finish in Single Point Diamond Turning"presented in a International level conference on 1st International Conference on Opto-Electronics and Photonic Materials (ICOPMA-2015) , organised by SASTRA University, Tanjore, India from 16-Dec-2015
    9. Venkatraman B and Omkumar M , "Nano-Level Form finish in Poly-Carbonate Material" presented in a International level conference on 6th International Conference on Advancements in polymeric materials (APM’ 2015) , organised by Central Institute of Plastics and Technology, Bangalore, India from 18-Nov-2015
    10. Venkatraman B and Omkumar M , "Mathematical Formulation for the Estimation of Volumetric Heat Transfer in Precision Machining Operations" presented in a International level conference on in International conference on Innovative trends in mechanical, material, manufacturing, automobile, aeronautical engineering and applied physics , organised by Jawaharlal Nehru University, Delhi, India from 20-Aug-2015
    11. Omkumar M"Preparation And Characterization Of Leather Polymer Composites" presented in a International level conference on 20th International Conference on Composite Materials, organised by Bella Centre, Copenhagen, DENMARK from 19-Jul-2015 to 24-Jul-2015
    12. Omkumar M and Venkatraman B , "Printing of kidneys using 3D Bio Printe" presented in a International level conference on PINNACLE’14, organised by Department of Mechanical Engineering Anna University-College of Engineering Guindy, India from 05-Aug-2014
    13. Omkumar M"Genetic Algorithm for inventory optimization in a flow shop" presented in a International level conference on International Conference on Recent Trends in Engineering and Technology (ICRTET 2014), organised by Mount Zion College of Engineering & Technology, Pudukottai, India from 18-Jan-2014 to 19-Jan-2014
    14. Omkumar M"Cuckoo search based hybrid evolutionary algorithm for scheduling jobs in a flexible flow shop" presented in a International level conference on International Conference on Recent Trends in Engineering and Technology (ICRTET 2014), organised by Mount Zion College of Engineering & Technology, Pudukottai, India from 18-Jan-2014 to 19-Jan-2014
    15. Omkumar M and Karthikeyan N , "Heurisitics for inventory Optimisation in a hybrid shop" presented in a International level conference on : International Conference on Manufacturing Systems Engineering: ICMSE 2013, organised by World Academy of Science and Technology, Venice, ITALY from 14-Nov-2013 to 15-Nov-2013
    16. Saravanan R., Raju R., Omkumar M. and Suresh Babu A. , "Effect Of Continuously Flowing Abrasives In Grinding Of Glass " presented in a International level conference on International Conference On Advances In Manufacturing Technology ICAMT 2012, organised by Chennai Institute of Technology, India from 14-Mar-2012
    17. Omkumar M"Analysis of demand uncertainties of supply chain in a construction equipment industry " presented in a International level conference on Proc. Of International Conference On Recent Advances In Mechanical Engineering INCRAME 2011, organised by MGR University, Chennai, India from 21-Apr-2011 to 22-Apr-2011
    18. S Senthil Kumar and M. Omkumar, "Simulation Based Monitering Of Cycle Time Deviations In A Manufacturing Facility" presented in a International level conference on Proc. Of International Conference On Recent Advances In Mechanical Engineering INCRAME 2011, organised by MGR University, Chennai, India from 21-Apr-2011 to 22-Apr-2011
    19. Omkumar M"Dispatch rule at intermediate queues in a Hybrid Flow shops Parallel Scheduling Problem" presented in a International level conference on , Proc. of International Conf. on Advances in Industrial Engineering Applications. , organised by Anna University Chennai, Chennai, India from 09-Sep-2010
    20. Mahaviradhan N, Omkumar M and Ranjith Kumar P, "A simulation of optimize supply chain logistics management system using ant colony algorithm" presented in a International level conference on Second annual Global Business Summit Conference (GBSC2010), organised by Global Strategic Management Inc., USA at Karunya University, India from 23-Jun-2010 to 25-Jun-2010
    21. Sivasankaran, Suresh, Suresh Babu and Omkumar, "Analyzing the Effect of Mist Coolant in Micro turning" presented in a International level conference on 11th Annual Conference of the Society of Operations Management, , organised by Symbiosis Institute of Operations Management, Pune, India from 14-Nov-2007
    22. Omkumar M"Optimizing the method of selection of Transport Vehicles in a Supply Chain using Genetic Algorithm" presented in a International level conference on 10th Annual Conference of the Society of Operations Management, organised by IIMA, Ahmedabad, India from 21-Dec-2006
    23. M.Omkumar and P.Shahabudeen, "Automated Guided Vehicle through remote access for future factories" presented in a International level conference on CARs & FOF’2006 International Society for Productivity Enhancement(ISPE) , organised by Vellore Institute of Technology, Vellore, India from 13-Jul-2006
    24. Omkumar M"Simulation modeling and Analysis of Multilevel jobs in Dynamic Assembly jobshops for Due Date Based Measures of Performances" presented in a International level conference on CARs & FOF’2006 International Society for Productivity Enhancement(ISPE) , organised by Vellore Institute of Technology, Vellore, India from 06-Jul-2006
    25. Omkumar M"Effect of compressed air on surface finish in Microturning" presented in a International level conference on Centenary International Conference on advances in Mechanical Engineering, organised by IISc, Bangalore, India from 03-Jul-2006 to 06-Jul-2006

Organized

Sl.No. Title Type Level Role Duration
1. National level workshop on "One day workshop for the disadvantaged General minority, SC/ST trainees and students of the constituent institutions of Anna University" Workshop National Coordinator 17-Oct-2015
2. National level workshop on "Workshop for Building Self Esteem and a Strong Personality" Workshop National Coordinator 17-Oct-2015 to 17-Oct-2015
3. National level conference on "Recent Trends in Manufacturing Technology" Conference National Organizer 16-Mar-2015 to 17-Mar-2015
4. National level workshop on "One day workshop for the disadvantaged General minority, SC/ST trainees and students of the constituent institutions of Anna University" Workshop National Coordinator 09-Mar-2013
5. National level workshop on "Personality Development Program" Workshop National Coordinator 09-Mar-2013
6. National level workshop on "Advanced Metrology in Manufacturing Engineering" Workshop National Coordinator 03-Oct-2012 to 05-Oct-2012
7. National level seminar on "Recent Trends in Manufacturing Technology" Seminar National Organizer 11-Mar-2011 to 12-Mar-2011
8. National level workshop on "Advances in Metrology and Measurements METROMENT" Workshop National Coordinator 22-Nov-2010 to 23-Nov-2010
9. National level seminar on "Recent Trends in Manufacturing Technology" Seminar National Organizer 06-Mar-2009 to 07-Mar-2009

Chaired/Co Chaired

Sl.No. Title Type Level Role Institution Duration
- - - - - -

Attended

Sl.No. Title Type Level Organising Institution Country Duration
1. International level Short Course on "GIAN workshop on Advanced Composite Structures" Short Course International IIT Kharagpur India 17-Dec-2016 to 27-Dec-2016
2. International level workshop on "Workshop on Liaison Officers of SC ST" Workshop International ISTM, New Delhi India 07-Mar-2016 to 08-Mar-2016
3. National level Short Course on "STP on Research Methodology" Short Course National MNIT, Jaipur India 27-Oct-2015 to 31-Oct-2015
4. International level conference on "20th International Conference on Composite Materials" Conference International Copenhagen Denmark 19-Jul-2015 to 24-Jul-2015
5. International level Short Course on "CNC Machines and Robotics" Short Course International Department of Manufacturing Engineering, CEG, Anna University, Chennai India 15-Jun-2015 to 19-Jun-2015
6. International level workshop on "Orientation Programme on Management of Diversity and Equity in Universities and Colleges" Workshop International The National University of Educational Planning and Administration, (NUEPA), New Delhi India 16-Mar-2015 to 20-Mar-2015
7. International level Short Course on "Reservation in Services for SC/ST/OBC" Short Course International Department of Personnel and Training, Institute of Secretariat Training and Management, New Delhi India 25-Aug-2014 to 27-Aug-2015
8. National level Short Course on "FDP on Nanotechnology" Short Course National MIT, Anna University, Chennai India 23-Jun-2014 to 29-Jun-2014
9. International level Short Course on "Advanced Engineering Optimization through Intelligent Techniques" Short Course International Department of Mechanincal Engineering, Sardar Vallabhbhai National Institute of Technology (SV NIT, Surat, Gujarat) India 27-Jan-2014 to 31-Jan-2014
10. International level conference on "International Conference on Manufacturing Systems Engineering" Conference International World Academy of Science, Engineering and Technology Italy 14-Nov-2013 to 15-Nov-2013
11. International level seminar on "Taylor Hobson Seminar Announcement" Seminar International IIT, Madras India 20-Feb-2013
12. National level workshop on "Welding Research Today : Challenges & Opportunities" Workshop National Indian Institute of Welding, Chennai branch, IIT Madras India 23-Nov-2012 to 24-Nov-2012
13. International level workshop on "QIP Sponsored workshop on engineering Optimization using MATLAB" Workshop International IIT Guwahati India 29-Feb-2012 to 02-Mar-2012
14. National level workshop on "Advances in Metrology and Measurements" Workshop National Department of Manufacturing Engineering, CEG, Anna University, Chennai India 22-Nov-2010 to 23-Nov-2010
15. International level conference on "Multi-criteria Decision Making" Conference International Industrial Engineering India 08-Oct-2010 to 09-Oct-2010
16. National level Short Course on "Startegic implementation of TQM and TPM" Short Course National Sri Ramakrishna Engineering college, Coimbatore India 10-May-2010 to 14-May-2010
17. National level seminar on "Mentoring Youth and Adolescence" Seminar National Centre for Empowerment of Women, Anna University, Chennai India 16-May-2007
18. National level workshop on "Quantitative Techniques for Research in Engineering and Management" Workshop National MIT, Anna University, Chennai India 08-Feb-2007 to 09-Feb-2007
19. National level workshop on "SPSS Package for Research Analysis" Workshop National - India 08-Dec-2006
20. National level Workshop on "Introduction to Electropneumatics EP211”(FESTO)" Workshop National - India 20-Nov-2006 to 24-Nov-2006
21. National level workshop on "Introduction to Pneumatics P111” (FESTO)" Workshop National - India 16-Oct-2006 to 20-Oct-2006
22. National level workshop on "Re-Engineering Teaching Skills" Workshop National - India 17-Jun-2004 to 18-Jun-2004
23. National level seminar on "Global Trends in Manufacturing Technology" Seminar National - India 25-Jul-2003
24. National level workshop on "NABL Accreditation appreciation programme on ISO/IEC 17.025" Workshop National - India 11-Apr-2003
25. National level workshop on "Advanced Manufacturing Technology" Workshop National CEG, Anna University, Chennai India 07-Mar-2003 to 08-Mar-2003
26. National level workshop on "Rapid Prototyping Technology 2002” Workshop National CEG, Anna University, Chennai India 18-Oct-2002 to 19-Oct-2002
27. National level seminar on "Patent Awarness Program" Seminar National Technology gate way India 02-Mar-2002
28. National level seminar on "Student’s Expectation and Teacher’s Role" Seminar National Anna University, Chennai India 26-Jan-2002
29. National level seminar on "Recent Trends in Quality and Reliability Systems" Seminar National Anna University, Chennai India 04-Jan-2002 to 05-Jan-2002

On Going

Sl.No. Project Title Project Type Principle Investigator / Co-Principal Investigator / Coordinator / Co-coordinator Funding Agency Project Status Amount Department Duration
- - - - - - - - -

Completed

Sl.No. Project Title Project Type Principle Investigator / Co-Principal Investigator / Coordinator / Co-coordinator Funding Agency Project Status Amount Department Duration
- - - - - - - - -

Details of Ph.D Scholars/MS (By Research) Students/M.E./M.Tech. Projects/M.Sc./M.Phil. Projects as Supervisor

Sl.No. Number of Guided Ongoing
1. Ph.D Scholars 3 6
2. MS (By Research) Students - -
3. M.E./M.Tech. Projects 26 3
4. M.Sc./M.Phil. Projects - -

Details of Ph.D Scholars/MS (By Research) Students/M.E./M.Tech. Projects/M.Sc./M.Phil. Projects as Joint Supervisor

Sl.No. Number of Guided Ongoing
1. Ph.D Scholars - -
2. MS (By Research) Students - -
3. M.E./M.Tech. Projects - -
4. M.Sc./M.Phil. Projects - -

Details of scholars - Ongoing

Sl.No. Name of the Scholar Title Registration No. Status Capacity as Guide
1. Manikandan.A.R Synthesis of Tio2&graphite reinforced polymer nano composites 1414219175 Ongoing Supervisor
2. Kalyan kumar.R Investigation of Ultrasonic Welding to join polymide composites and aluminium alloy - Ongoing Supervisor
3. Thiruvaranga Selvi.S GIS based multi criteria Decision Analysis for Coastal disaster risk reduction in Tirunelveli and Tuticorin districts, Tamil Nadu - Ongoing Supervisor
4. Sangeetha.D Studies on the effort of Silane treatment of plant based Natural FRP composites - Ongoing Supervisor
5. Srinivasan.S Fabrication & characterization of Natural Fiber composites - Ongoing Supervisor
6. Arul prasanna A Characterization of Natural Fiber Reinforced polymer composites - Ongoing Supervisor

Details of scholars - Completed

Sl.No. Name of the Scholar Title Registration No. Status Capacity as Guide
1. Girisankar.S Analysis of Fatigue life of hard finish turning surfaces with various CBN inserts 1213219742 Completed Supervisor
2. Rameshkumar.C Surface behaviour of the abrasive grains used in optical glass polishing 111221940 Completed Supervisor
3. Selvakumar.K Optimization of Mechanical Properties &Machining Parameters on Natural Composites for Automotive Application 1513219777 Completed Supervisor

Invited Lectures

Sl.No. Level Topic Programme Institution Place Date
1. National "Computer Aided Metrology and Inspection " in Computer Aided Manufacturing and Technology Lecture National Institute of Technical Teachers Training, Taramani Chennai 09-Sep-2015
2. National "Machine Vision Concepts and Applications" in Robotics and Mechatronics for Industrial Automation Lecture National Institute of Technical Teachers Training, Taramani Chennai 05-Mar-2015
3. National "Chemical & Electrochemical NTM Process" in Non Traditional Machining Lecture National Institute of Technical Teachers Training, Taramani Chennai 03-Feb-2015
4. National "Chemical & Electrochemical NTM Process" in Advances in Welding & Manufacturing Lecture National Institute of Technical Teachers Training, Taramani Chennai 07-Jan-2014
5. National "Chemical & Electrochemical NTM Process" in Non Traditional Machining Lecture National Institute of Technical Teachers Training, Taramani Chennai 10-Dec-2013)
6. National CNC Programming and ANSYS Practice in Two day Workshop Lecture Vel Tech Chennai 07-Aug-2013
7. National "Discrete Simulations & its Applications" Lecture Velammal Engineering College Chennai 30-Jul-2013
8. National "The Scope of Mechanical Discipline" Lecture Srinivasa Institute of Engineering and Technology, Poonamallee Chennai 24-Jul-2013
9. National Discrete Simulations & its applications Lecture Velammal Engineering College Chennai 03-Jul-2013
10. National "Chemical & Electrochemical NTM Processes" in Non Traditional Machining Lecture National Institute of Technical Teachers Training, Taramani Chennai 04-Dec-2012
11. National "Chemical & Electrochemical NTM Process" in Advances in Welding & Manufacturing Lecture National Institute of Technical Teachers Training, Taramani Chennai 25-Sep-2012
12. National "Chemical & Electrochemical NTM Process" in Advanced Manufacturing Techniques Lecture National Institute of Technical Teachers Training, Taramani Chennai 25-Sep-2012
13. National "Computer Aided Metrology and Inspection" in Computer Aided Manufacturing and Technology Lecture National Institute for Technical Teachers Training, Taramani Chennai 20-Mar-2012
14. National "Computer Aided Manufacturing & Metrology" in Computer Aided Inspection & Metrology Lecture National Institute for Technical Teachers Training, Taramani Chennai 19-Mar-2012
15. National "Chemical & Electrochemical NTM Processes" in Non Traditional Machining Lecture National Institute of Technical Teachers Training, Taramani Chennai 04-Dec-2012
16. National "Computer Aided Inspection & Image Processing" Lecture MAM College of Engineering Trichy 14-Oct-2010

Details of Experience Abroad

Sl.No. Nature of Assignment Institution/Organization Country Funding Agency Duration
1. Oral Presentation Copenhagen Denmark - 17-Jul-2015 to 26-Jul-2015
2. Oral Presentation Waset, Mestre, Venice Italy - 13-Nov-2013 to 14-Dec-2013

Awards

Sl.No. Title of the Award Awarding Institution Country Awarded Year
1. A.S. Raju memorial award Anna University, Chennai India 2017
2. Best paper of the Conference Anna University, MIT Campus India 2017
3. Best project Anna University, Chennai India 2012
4. Best paper of the Conference Institute of Management Education(IME), Sahidabad, Uttar Pradesh India 2010

Representation in International/National/State Bodies

Sl.No. Level Body Capacity of representation Duration
1. - Quality Circle Forum Of India Life Member -
2. - ISTE (Indian Society of Technical Education) Life Member -
3. - World Academy of Science, Engineering and Technology Life Member -
4. - International Association of Engineers Life Member -

Patents Awarded

Sl.No. Patent Title Patent No Date Country
- - - - -

Patents Filed

Sl.No. Patent Title File No Date of Filing Country
- - - - -

Details of Books Published

Sl.No. Title of the Book Author CoAuthor 1 CoAuthor 2 Publisher Place of Publication Year of Publication
1. Warehouse: Layout Planning & Part Feeding Methods Dr.M.Omkumar Dr.S.Senthil Kumar - Yes Dee Publishing Pvt. Ltd., Chennai 2014

Extension & Outreach Programmes

Sl.No. Type of the Programme Title of the Programme Role Cross Section of Participants No. of Participants Funded by Venue Duration
- - - - - - - - -