Faculty Profile

UG/PG Degree

Sl.No. Level Degree Branch Institution University Duration Class Obtained
1. Post Graduate M.E. Production Engineering College of Engineering Anna University, Chennai 1989 to 1992 First Class with Distinction
2. Under Graduate B.E. Mechanical Engineering College of Engineering Anna University, Chennai 1983 to 1987 First Class

Research Degree

Sl.No. Degree Title of the Thesis Research Area Faculty Department Institution University Duration
1. Ph.D. Experimental Study Of Mechanical Properties And Corrosion Behaviour Of Cryo-Treated AISI 51100 Bearing Steel Manufacturing Enginering Faculty of Mechanical Engineering Department Of Mechanical Engineering College of Engineering Guindy Anna University, Chennai 2000 to 2005

Area of Specialization

  • Micromachining
  • Computer Aided Manufacturing
  • Machining
  • Nanomaterials

Membership in Professional Bodies

  • Life Member, Indian Society for Technical Education (ISTE)
  • Fellow Member, Institution of Engineers (IE India)
  • Life Member, Indian Society for Non destructive Testing (ISNT)
  • Life Member, Indian Welding Society (IWS)
  • Fellow Member, Society for Manufacturing Engineers (SME)
  • Life Member, Indian society for Mechanical Engineers (ISME)
  • Life Member, Additive Manufacturing Society Of INDIA (AMSI)
  • Life Member of The Indian Institute of Metals (IIM)
  • Life Member of Quality Circle Forum of India

Present Position

Sl.No. Designation From To Department/Centre Campus
1. Professor 01-01-2009 Till date Department of Manufacturing Engineering, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai

Previous Positions

Sl.No. Designation From To Department/Centre Campus
1. Associate professor 01-01-2006 01-01-2009 Department of Manufacturing Engineering, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
2. Lecturer Sl.Grade 13-02-2002 31-12-2005 Department of Manufacturing Engineering, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
3. Lecturer Sr. Grade 13-02-1998 12-02-2002 Department of Manufacturing Engineering, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
4. Lecturer 13-02-1992 12-02-1998 Department of Manufacturing Engineering, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
5. Teaching Fellow 12-02-1988 12-02-1992 Department of Manufacturing Engineering, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai

Present Additional Responsibility

Sl.No. Position From To Department/Centre Campus
1. Director 26-07-2021 Till date Centre for Constituent Colleges, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
2. Staff Adviser 10-09-2020 Till date College of Engineering Guindy, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
3. Convener 17-08-2020 Till date Grievance Redressal Committee, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai

Previous Additional Responsibility

Sl.No. Position From To Department/Centre Campus
1. Director 23-06-2021 06-08-2021 Additional Controller of Examinations, University Departments, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
2. Director 02-07-2018 23-07-2021 Centre for Student Affairs, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
3. Head of the Department 31-05-2014 28-08-2018 Department of Manufacturing Engineering, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
4. Secretary 30-10-2010 29-09-2012 Alumni Association, CEG, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
5. Treasurer 27-09-2008 29-09-2018 Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
6. Executive Warden 03-03-2009 30-07-2020 Engineering College Hostels College of Engineering Guindy, Anna University, Chennai
7. Treasurer 01-10-2004 23-09-2006 Alumni Association, CEG, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
8. Deputy Warden 01-07-1993 03-03-2009 College of Engineering Guindy, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai
9. Resident Counselor 12-10-1989 09-09-1996 Department of Manufacturing Engineering, Anna University, Chennai College of Engineering Guindy, Anna University, Chennai

Other Employment Details

Sl.No. Work Nature Designation Institution/Industry Years of Experience
- - - - -

Research Papers Published in Journals

    1. Arun Pillai KV, P Hariharan,"Experimental investigation on the recast layer and performance indicators during nano powder mixed μED miling of Ti-6Al-4V", Surface Topography: Metrology and Properties, Publisher IOP Publishing, Vol. 9, Issue 2, Pages 025041 (2021)
    2. Bhavesh Ganesan, P Hariharan, Durgalakshmi Dhinasekaran,"Hot Corrosion Studies of Nanostructured Gadolinium Zirconate Thermal Barrier Coatings", Ceramics International, Publisher Elsevier (2021)
    3. KV Arun Pillai, P Hariharan, R Krishna Murthy,"Micro ED Milling of Ti-6Al-4V with SiC Nano Powder Mixed Dielectrics at Different Ranges of Discharge Energy", Silicon, Publisher Springer Netherlands, Vol. 13, Issue 6, Pages 1827-1837 (2021)
    4. KV Arun Pillai, P Hariharan,"Experimental Investigation on Surface and Machining Characteristics of Micro ED Milling of Ti-6Al-4 V with Different Nano Powder Mixed Dielectrics", Silicon, Publisher Springer Netherlands, Pages 1-24 (2021)
    5. E Rajkeerthi, P Hariharan, N Pradeep,"Enhancing machining rate and geometrical accuracy in electrochemical micromachining of Co-Ni-Cr-W superalloy", Materials and Manufacturing Processes, Publisher Taylor & Francis, Vol. 36, Issue 4, Pages 488-500 (2021)
    6. B Mouliprasanth, P Hariharan,"Influence of Variant Electrolyte in Electrochemical Micromachining of Micro Holes in SMA Using Taguchi Optimization", Russian Journal of Electrochemistry, Publisher Pleiades Publishing, Vol. 57, Issue 3, Pages 197-213 (2021)
    7. Dadi Ravikanth & P. Hariharan,"Psychophysics Experiment to Check the Temperature Impacts Over Human Fingertips for the Application of Textural Applications in Haptics Technology", Arabian Journal for Science and Engineering, Publisher Springer, Vol. 2021, Issue 1, Pages 1-8 (2021)
    8. B Mouliprasanth, P Hariharan,"Scale effects and a method to evaluate similarity in electrochemical micromachining of Nitinol", Materials and Manufacturing Processes, Publisher Taylor & Francis Inc, Vol. 36, Issue 1, Pages 39-47 (2021)
    9. P Sivaprakasam, P Hariharan,"Surface characteristics of nano powder mixed micro-wire electrical discharge machining on inconel alloy", Journal Materials Today: Proceedings, Publisher Elsevier, (2021)
    10. E Rajkeerthi, CP Satyanarayan, M Jaivignesh, N Pradeep, P Hariharan,"Effect of Heat Treatment on Strength of Aluminium Matrix Composites", Materials Today: Proceedings, Publisher Elsevier, (2020)
    11. B Mouliprasanth, P Hariharan,"Scaling approach towards electrochemical micromachining: a method to evaluate similarity", Journal The International Journal of Advanced Manufacturing Technology, Publisher Springer London, Volume 108, Issue 9, Pages 3231-3249 (2020)
    12. B Mouliprasanth, P Hariharan,"Measurement of Performance and Geometrical Features in Electrochemical Micromachining of SS304 Alloy", Journal Experimental Techniques, Published by Springer International Publishing, 1-15, (2019)
    13. P Sivaprakasam, P Hariharan, G Elias,"Experimental investigations on magnetic field-assisted micro-electric discharge machining of inconel alloy", Journal International Journal of Ambient Energy, Publisher Taylor & Francis, Pages 1-8, (2020)
    14. CS Shamli, P Hariharan, N Yuvaraj, E Rajkeerthi,"Impact of Electrical Process Parameters in Electrochemical Micromachining of Nimonic 75 Alloy", International Journal of Vehicle Structures & Systems (IJVSS), Vol. 12, Issue 2, (2020)
    15. Nitesh Krishnan, J Deepak, P Hariharan,"Multi-response optimization of electrochemical micromachining on masked SS304", Journal Engineering Research Express, Publisher IOP Publishing, Volume 2, Issue 1, Pages 015041 (2020)
    16. JM Jafferson, P Hariharan, J Ramkumar,"Correlation of three-dimensional roughness parameters with the crater dimensions in μED-milling of cryogenic-treated tool and workpiece", Journal of Micro and Nano-Manufacturing, Publisher American Society of Mechanical Engineers Digital Collection, Volume 8, Issue 1 (2020)
    17. T Dinesh, A Kadirvel, P Hariharan,"Role of nano-silica in tensile fatigue, fracture toughness and low-velocity impact behaviour of acid-treated pineapple fibre/stainless steel wire mesh-reinforced epoxy hybrid composite", Journal Materials Research Express, Publisher IOP Publishing, Volume 6, Issue 12, Pages 125365, (2020)
    18. T Dinesh, A Kadirvel, P Hariharan,"Thermo-Mechanical and Wear Behaviour of Surface-Treated Pineapple Woven Fibre and Nano-Silica Dispersed Mahua Oil Toughened Epoxy Composite", Journal Silicon, Publisher Springer Netherlands, Pages 1-10 (2020)
    19. J Deepak, B Mouliprasanth, P Hariharan,"An Experimental Study on the Influence of External Vibrator Setup in Electrochemical Micromachining Characteristics of Titanium Grade 2 Alloy", Journal Materials Today: Proceedings, Publisher Elsevier, Volume 22, Pages 1921-1931 (2020)
    20. C Chandrasekhara Sastry, K Gokulakrishnan, P Hariharan, M Pradeep Kumar, S Rajendra Boopathy"Investigation of boring on gunmetal in dry, wet and cryogenic conditions", Journal of the Brazilian Society of Mechanical Sciences and Engineering, Publisher Springer Berlin Heidelberg, Volume 42, Issue 1, Pages 16 (2020)
    21. M Mudhukrishnan, P Hariharan, K Palanikumar,"Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills", Journal Measurement, Publisher Elsevier, Volume 149, Pages 106973 (2020)
    22. P Sivaprakasam, P Hariharan, S Gowri, "Experimental Investigations on Nano Powder Mixed Micro-Wire EDM Process of Inconel-718 Alloy", Measurement, published by Elsevier. (2019).
    23. M Mudhukrishnan, P Hariharan, K Palanikumar, B Latha, "Optimization and sensitivity analysis of drilling parameters for sustainable machining of carbon fiber–reinforced polypropylene composites", Journal of Thermoplastic Composite Materials, published by SAGE Publications Vol. 32, Issue 11, Pages 1485-1508 (2019)
    24. B Mouliprasanth, P Hariharan,"An Experimental Study and Analysis of Different Dielectrics in Electrical Discharge Machining of Al 6063 Alloy", Journal of Polymer Materials, Vol. 36, Issue 4, (2019)
    25. C Chandrasekhara Sastry, P Hariharan, M Pradeep Kumar, MA Muthu Manickam, "Experimental investigation on boring of HSLA ASTM A36 steel under dry, wet, and cryogenic environments", Materials and Manufacturing Processes, published by Taylor & Francis. pp.1-28 (2019).
    26. P Sivaprakasam, J Udaya Prakash, P Hariharan, "Enhancement of Material Removal Rate in Magnetic Field-Assisted Micro Electric Discharge Machining of AMCs", International Journal of Ambient Energy, published by Taylor & Francis. pp. 1-15 (2019).
    27. KV Arun Pillai, P Hariharan, JM Jafferson, "μED milling of Ti-6Al-4V using cryogenic-treated Wc tool and nano-graphene powder-mixed dielectricat different discharge energy regimes", The International Journal of Advanced Manufacturing Technology, published by Springer London. Vol. 102, Issue 9, pp. 2721-2743 (2019).
    28. C Chandrasekhara Sastry, P Hariharan, M Pradeep Kumar, "Experimental investigation of dry, wet and cryogenic boring of AA 7075 alloy", Materials and Manufacturing Processes, published by Taylor & Francis. Vol. 34, Issue 7, pp. 814-831 (2019).
    29. M Mudhukrishnan, P Hariharan, K Palanikumar, "Delamination Analysis in Drilling of Carbon Fiber Reinforced Polypropylene (CFR-PP) Composite Materials", Materials Today: Proceedings, published by Elsevier. Vol. 16, pp. 792-799 (2019).
    30. K Pooranachandran, J Deepak, P Hariharan, B Mouliprasanth, " Effect of Flushing on Electrochemical Micromachining of Copper and Inconel 718 Alloy", Advances in Manufacturing Processes, published by Springer, Singapore. pp. 61-69 (2019).
    31. KM Kumar, P Hariharan, B Ramesh, " Study on the influential process parameters in machining the austempered ductile iron", Materials and Manufacturing Processes, published by Taylor & Francis. Vol. 33, Issue 4, pp. 414-421 (2018).
    32. Ravikanth Dadi, P Hariharan, "Design of Electrocutaneous Tactile Display over Human Fingertip for Textural Applications in Space Manufacturing Feedback", Procedia computer science, published by Elsevier. Vol. 133, pp. 684-690 (2018).
    33. S Ananth, J Udaya Prakash, TV Moorthy, P Hariharan, "Optimization of Wear Parameters for Grey Cast Iron under Different Conditions using Grey Relational Analysis", Materials Today: Proceedings, published by Elsevier. Vol. 5, Issue 2, pp. 7346-7354 (2018).
    34. R Gobinath & P Hariharan, "Influence of Process Parameters in Electrochemical Micromachining of Hastelloy Using Topsis Technique", Journal of the Balkan Tribological Association Vol, Vol. 24, Issue 4, pp. 796-806 (2018).
    35. P Saravana Kumar, P Hariharan, L Vijayaraghavan, " Drilling of Polymeric Nano Composite Laminates Analyzing using Optimal Neural Network", Asian Journal of Research in Social Sciences and Humanities, published by Asian Research Consortium. Vol. 7, Issue 3, pp. 1192-1212 (2017).
    36. P Saravana Kumar, P Hariharan, L Vijayaraghavan, "Analysis of Parameters in Drilling Process Aid of Mathematical Modeling with Inspired Optimization Techniques", Asian Journal of Research in Social Sciences and Humanities, published by Asian Research Consortium. Vol. 7, Issue 3, pp. 1310-1322 (2017).
    37. KM Kumar, P Hariharan, "Prediction And Investigation Of Surface Roughness While Turning Sg Iron With Cubic Boron Nitride (CBN) And Tungsten Carbide Inserts", Transactions of the Canadian Society for Mechanical Engineering, published by CSME TRANS. Vol. 41, Issue 1, pp. 129-141 (2017).
    38. KM Kumar, P Hariharan, B Ramesh, " Study on the influential process parameters in machining the austempered ductile iron", Materials and Manufacturing Processes, published by Taylor & Francis. pp. 1-8 (2017).
    39. R Ravi Raja Malar Vannan, TV Moorthy, P Hariharan, P Prabhu, "Effect of physical vapor deposited bilayer (AlCrN+ TiAlN) coating on high-speed steel single point cutting tool", Materials and Manufacturing Processes, published by Taylor & Francis. Vol. 32, Issue 4, pp. 373-376 (2017).
    40. M Mudhukrishnan, P Hariharan, K Palanikumar, B Latha, "Tool materials influence on surface roughness and oversize in machining glass fiber reinforced polypropylene (GFR-PP) composites", Materials and Manufacturing Processes, published by Taylor & Francis. Vol. 32, Issue 9, pp. 988-997 (2017).
    41. OV Mythreyi, P Hariharan, S Gowri, "Multi-objective optimisation of electrochemical micro drilling of titanium alloy", International Journal of Precision Technology, published by Inderscience Publishers (IEL). Vol. 7, Issue 2, pp. 188-204 (2017).
    42. Kumar KM, Hariharan P, Venkateshwaran P & Tamilarasan S, "Examination of Microstructure and Mechanical Properties of Austempered Ductile Iron (ADI) as per austempering temperature and time", Transactions of Indian Institute of Metal, Vol. 68, pp. S67-S71 (2017).
    43. Kumar KM, Hariharan P, "Prediction and Investigation of Surface Roughness While Turning Spheroidal Graphite (SG) Iron with Cubic Boron Nitride (cBN) and Tungsten Carbide Inserts", Transactions of the Canadian Society for Mechanical Engineering, Vol. 40, (2017).
    44. Kumar KM, Hariharan P & Ramesh B, "Study on the influential process parameters and their effectiveness in machining the Austempered Ductile Iron", Materials and Manufacturing Processes, (2017).
    45. P Saravana Kumar, P Hariharan, "An investigation of Drilling characteristics of Carbon-Carbon composites by Acoustic emission process", Journal of Advances in Chemistry, Vol. 13, Issue 8, pp. 6432-6437 (2017).
    46. CS Chandar, A Nazarene, P Kumar, P Hariharan, T Paavai, LN Ranganathan, S, G., "Correlation Of Carotid Arterial Bruit With Symptomatic Carotid Vascular Disease", International Journal of Stroke, published by Sage Publications Ltd. Vol. 11, pp. 254-255 (2016).
    47. Dadi Ravikanth, Hariharan P, "Low Cost Portable Physiotherapy Machine with Passive Harmongraph Programming Setup", International Journal of Engineering Research & Technology (IJERT), published by ESRSA Publications Pvt. Ltd. Vol. 4, Issue 26, pp. 77-80 (2016).
    48. M Mudhukrishnan, P Hariharan, K Palanikumar, B Latha, "Tool Materials Influence on Surface Roughness and Oversize in Machining Glass Fiber Reinforced Polypropylene (GFR-PP) Composites", Materials and Manufacturing Processes, published by Taylor & Francis. (2016).
    49. R Ravi Raja Malar Vannan, TV Moorthy, P Hariharan, P Prabhu, "Effect of Physical Vapour Deposited Bi-Layer (AlCrN+ TiAlN) Coating on High Speed Steel Single point cutting tool", Materials and Manufacturing Processes, published by Taylor & Francis. (2016).
    50. S Ponnuvel, TV Moorthy, P Hariharan, "Effect Of Multi-Walled Carbon Nanotubes On Surface Roughness And Material Removal Rate In Drilling EPDXY/Glass Fabric Composite", Journal Of The Balkan Tribological Association, published by SCIBULCOM LTD. Vol. 22, Issue 2, pp. 1363-1375 (2016).
    51. R Malarvannan, TV Moorthy, P Hariharan, P Prabhu, " Investigation on HSS single point cutting tool manufactured using physical vapor deposition coating process", Indian Journal of Engineering and Materials Sciences (IJEMS) , published by NISCAIR-CSIR, India. Vol. 23, pp. pp. 129-133 (2016).
    52. JM Jafferson, P Hariharan, J Ram Kumar, "Effect of non-electrical parameters in μED milling: an experimental investigation", The International Journal of Advanced Manufacturing Technology, published by Springer London. Vol. 85, Issue 9, pp. 2037-2047 (2016).
    53. Venkatraman. B, Om Kumar. M, Ganesan. G, Hariharan .P, Ramagopal V Sarepaka, "Machining zone Area in Single Point Diamond Turning", International Journal of Applied Engineering Research, published by Research India Publications. pp. 1476-1479 (2015).
    54. KM Kumar, P Hariharan, P Venkateshwaran, S Tamilarasan, "Examination of Microstructure and Mechanical Properties of Austempered Ductile Iron (ADI) As Per Austempering Temperature and Time", Transactions of the Indian Institute of Metals, Vol. 68, pp. 67-71 (2015).
    55. RRR Malarvannan, TV Moorthy, S Sathish, P Hariharan, "Investigation on the corrosion behavior of physical vapor deposition coated high speed steel", Advances in Mechanical Engineering, Vol. 7, (2015).
    56. M Mudhukrishnan, P Hariharan, SK Malhotra, "Characterization of Glass Fibre/Carbon Fibre Hybrid Thermoplastics Composite Laminates Fabricated by Film Stacking Method", Applied Mechanics and Materials, Vol. 787, pp. 518-522 (2015).
    57. JM Jafferson, P Hariharan, JR Kumar, "Effect of non-electrical parameters in μED milling: an experimental investigation", The International Journal of Advanced Manufacturing Technology, pp. 1-11 (2015).
    58. K Prasanna, M Karuppiah, K Hariharan, P Hariharan, "Variable magnetic field intensity assisted micro electric discharge drilling for AISI 304 & AISI 316L stainless steel", History , Vol. 37, pp. 21-27 (2015).
    59. M Mudhukrishnan, P Hariharan, SK Malhotra, "Characterization of Glass Fibre/Carbon Fibre Hybrid Thermoplastics Composite Laminates Fabricated by Film Stacking Method ", Applied Mechanics and Materials, Vol. 787, pp. 518-522 (2015).
    60. RRR Malarvannan, TV Moorthy, S Sathish, P Hariharan, "Investigation on the corrosion behavior of physical vapor deposition coated high speed steel", Advances in Mechanical Engineering, Vol. 7, (2015).
    61. KM Kumar, P Hariharan, P Venkateshwaran, S Tamilarasan, "Examination of Microstructure and Mechanical Properties of Austempered Ductile Iron (ADI) As Per Austempering Temperature and Time ", Transactions of the Indian Institute of Metals,, Vol. 68, pp. 67-71 (2015).
    62. Nitesh krishnan.j and Hariharan.p, "Influence of hardness by WC Based coatingon AlSi and grey cast iron using HVOF Coating method ", International organisation of scientific research, Vol. 4, pp. 36-42 (2014).
    63. Sivaprakasam.P and Hariharan.P, "RSM and ANN Modeling of micro wire electrical discharge machining of AL 2024 T351", Procedia Engineering, (2014).
    64. Sivaprakasam P, Hariharan P, Gowri S, "Analysis of Machining Parameters of μ-WEDM on Titanium Alloy", Applied Engineering research, Vol. 9, Issue 26, pp. 8901-8904 (2014).
    65. M.Shunmuga Priyan, P.Hariharan, "Wear and corrosion resistance of Fe based coatings by HVOF sprayed on gray cast-iron for automotive application", Tribology in Industry, Vol. 36, Issue 4, pp. 394 - 405 (2014).
    66. M.Shunmuga Priyan, P.Hariharan, "Abrasive Wear Modes in Ball-Cratering Test Conducted on Fe 73 Si 15 Ni 10 Cr 2 Alloy Deposited Specimen.", Tribology in Industry, Vol. 36, Issue 1, pp. 97‐106 (2014).
    67. P Sivaprakasam, P Hariharan, S Gowri, "Modeling and analysis of micro-WEDM process of titanium alloy (Ti–6Al–4V) using response surface approach", Engineering Science and Technology, pp. 227-235 (2014).
    68. A Kadirvel, P Hariharan, M Mudhukrishnan, "A Study on the Die-Sinking Micro-Electrical Discharge Machining of EN-24 Die Steel Using Various Electrode Materials", Advanced Materials Research,, pp. 73-82 (2014).
    69. JM Jafferson, P Hariharan, J Ram Kumar, "Effects of ultrasonic vibration and magnetic field in micro-EDM milling of nonmagnetic material", Materials and Manufacturing Processes, Issue 29, pp. 357-363 (2014).
    70. MS Priyan, P Hariharan, A Azad, KS Kumar, "Tribology in Industry", (2014).
    71. M Prakash, P Hariharan, M Kanthababu, "Automation in CNC Code Generation and Tool Path Optimization for Micro-milling Machine", International Journal of Innovative Research and Development, Vol. 3, (2014).
    72. Anandhan.M, Rama Go and Hariharan.P, "Prediction of Surface Roughness Using Artificial Neural Network in Single Point Diamond Turning", International Journal of Scientific Research, published by The Global Journals. Vol. 2, Issue 6, pp. ISSN No. 2277-8179 (2013).
    73. Sivaprakasam.P , Hariharan.P and Gowri.S, "Optimization of Micro WEDM Process of Aluminum Matrix Composite (A413-B4C): A Response Surface Approach", Materials and Manufacturing Processes, published by Taylorand Francis. Vol. 28, Issue 12, pp. pp 1340-1347 (2013).
    74. Jafferson.J.M, Hariharan.P, "Machining performance of cryogenically treated electrodes in micro electric discharge machining: A comparative experimental study", Materials and Manufacturing processes, published by Taylor and Franics. Vol. 28, Issue 4, pp. 397-402 (2013).
    75. M. Shunmuga Priyan, Hariharan.P, "Micro abrasive wear resistance of FeSiNiCr alloy coating deposited by HVOF coating", International Journal of Surface Science and Engineering, published by Inderscience. Vol. 7, Issue 3, pp. 250-268 (2013).
    76. Hariharan. P, "Investigation on the Quality of Micro Electrical Discharge Machined EN-24 Die Steel using Different Electrodes", European Journal of Scientific Research, pp. pp.316-323 (2013).
    77. Paul Theophilus Raj, P. Hariharan, " A study on monitoring the drilling of polymeric nanocomposite laminates using acoustic emission", journal of composite materials, published by sage . pp. 1773-1784 (2013).
    78. A.Kadirvel , P.Hariharan and S.Gowri, "Experimental Investigation on the Electrode Specific Performance in Micro-EDM of Die-Steel", Journal of Materials and Manufacturing process, published by Taylor and Francis. Vol. 28, Issue 4, pp. 390-396 (2013).
    79. Jafferson.J.M, Hariharan.P, "Investigation on the quality of micro holes machined by µedm using image processing ", Materials and manufacturing processes, published by Taylor and franics. Vol. 28, Issue 12, pp. pp1356-1360 (2013).
    80. Sivaprakasam.P, Hariharan.P, "Modeling the Machining Parameters of Micro Wire Electrical Discharge Machining of AL 2024 T351,", Applied Mechanics and Materials , published by Scientific. Net. Vol. 367, pp. pp 466-470 (2013).
    81. Shunmuga priyan .M and Hariharan.P, "Microstructure and wear performance of FeBCr alloy coating deposited by HVOF method ", Applied Mechanics and Materials , published by tribology industry. (2013).
    82. K.M. Kumar and P. Hariharan, "Experimental determination of machining responses in machining austempered ductile iron", International Conference on Design and Manufacturing, published by Procedia Engineering. Vol. 64, pp. 1495-1504 (2013).
    83. Sivaprakasam.P, Hariharan.P, "Modeling and Optimization of Micro Electro Discharge Machining Process: A Review", Advanced Materials Research , published by scientific.net. Vol. 622, pp. pp 590-594 (2013).
    84. Kadirvel. A, Hariharan.P, "Optimization of die sinking micro-EDM process for multiple performance characteristics using Taguchi based Grey relational analysis”, Materials and Technology,", Materials and Technology, Vol. 1, pp. 27-32 (2013).
    85. Paul Theophilus Raja,Hariharan.P, "Drilling of carbon fibre reinforced plastic (CFRP) composites – a review", International Journal of Materials and Product Technology, published by inderscience . Vol. 43, pp. 43-67 (2012).
    86. Shunmuga Priyan.M,Hariharan.P, "The Study on Tribology and Surface Interface Characterization of Fe based Alloy Coating Deposited by HVOF Method", Procedia Engineering, published by science direct. Vol. 38, pp. pp 3741-3756 (2012).
    87. Kadirvel.A, Hariharan.P,Gowri.S, "A review on various research trends in micro-EDM", International Journal of Mechatronics and Manufacturing System, published by Interscience Publication. Vol. 5, pp. pp.361-384 (2012).
    88. Paul Theophilus Rajakumar ,Hariharan.P, "Monitoring the delamination while drilling polymeric Nano Composites Using Acoustic emission-A review", European journal of scientific Research, Vol. 75, Issue 3, pp. 390-396 (2012).
    89. M. Shunmuga Priyan, P.Hariharan, "A study of the microstructure, micro abrasive wear and corrosion resistance of HVOF sprayed, FeSiNiCr based alloy coating deposited on gray castiron – relevance to automobile application", Surface Coatings International, published by MedSci . Vol. 95, Issue 4, pp. pp 183- 194 (2012).
    90. V. Thomas Paul, Hariharan.P, "Identification of micro-structural zones and thermal cycles in a weldment of modified 9Cr-1Mo steel”, Journal of Materials Science, published by springer . Vol. 42, Issue 14, pp. 5700-5713 (2007).
    91. Hariharan. P,"Optimization of Heat Treatment Factors for improved Wear Resistance and Impact Strength of SAE 51100 Bearing Steel using Taguchi Techniques", Journal of Manufacturing Technology Today, CMTI, Bangalore, Vol. 5, Issue 4, pp. pp 15-19 (2006).
    92. Hariharan. P,"Optimization of Heat Treatment Factors for improved Wear Resistance and Impact Strength of bearing steel using L16 orthogonal array", Journal of Manufacturing Engineering, Vol. 1, pp. pp 45-50 (2006).

Research Papers Presented in Conferences

    1. G.Bhavesh, P. Deepak , D. Durgalakshmi , P. Hariharan,"Synthesis and Characterization of La2Zr2O7 Nanomaterials by Co-Precipitation Method for Thermal Barrier Coatings" presented in a International level conference on 6th ASIAN CONFERENCE ON HEAT TREATMENT AND SURFACE ENGINEERING, organised by ASM International Chennai Chapter, India from 05-Mar-2020 to 07-Mar-2020
    2. KV Arunpillai, P Hariharan, "Influence of Graphite Nanopowder-Mixed Dielectric Fluid", presented in a International level conference on 7th International And 28th All India Manufacturing Technology, Design And Research Conference 2018 (AIMTDR 2018), organised by Anna University, India from 13-Dec-2018 to 15-Dec-2018.
    3. J Deepak, N Vivek, B MouliPrasanth, P Hariharan,"Development of A Bore Using Jet Electrochemical Machining (JECM) In SS316 Alloy" presented in a International level conference on 7th International And 28th All India Manufacturing Technology, Design And Research Conference 2018 (AIMTDR 2018), organised by Anna University, India from 13-Dec-2018 to 15-Dec-2018.
    4. Hariharan. P,"Multiresponse Optimisation of Electrochemical Micromachining Process Parameters of Micro Circular Dimple Using TOPSIS Approach" presented in a International level conference on 7th International And 28th All India Manufacturing Technology, Design And Research Conference 2018 (AIMTDR 2018), organised by Anna University, India from 13-Dec-2018 to 15-Dec-2018.
    5. Sangeethakrishnan S, Rajkeerthi E, Hariharan P, Bhavesh G, "Design and Development of tool electrode for Electrochemical micromachining using Reverse EMM Technique" presented in a International level conference on 7th International And 28th All India Manufacturing Technology, Design And Research Conference 2018 (AIMTDR 2018), organised by Anna University, India from 13-Dec-2018 to 15-Dec-2018.
    6. J. Deepak, N. Vivek, B. MouliPrasanth and P. Hariharan, "Influence of Graphite Nano Powder Mixed Dielectric on Machining characteristics of Micro ED Milling" presented in a International level conference on 7th International And 28th All India Manufacturing Technology, Design And Research Conference 2018 (AIMTDR 2018), organised by Anna University, Chennai, India from 13-Dec-2018 to 15-Dec-2018.
    7. R.Ravi raja malar vannan, T.V. Moorthy, P. Hariharan, B.K.Gnanavel, "Effect of Physical Vapour Deposition Coatings on High Speed Steel Single Point Cutting Tool" presented in a International level conference on 4th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2018), organised by ASME, Malaysia, Malaysia from 14-Nov-2018 to 15-Nov-2018.
    8. Hariharan. P,"Effect of Flushing on Electrochemical Micromachining of Copper and Inconel 718 Alloy" presented in a International level conference on INTERNATIONAL CONFERENCE ON ENGINEERING MATERIALS METALLURGY & MANUFACTURING, organised by SSN College of Engineering, India from 15-Feb-2018 to 16-Feb-2018.
    9. K. Pooranachandran, J. Deepak, P. Hariharan, B. Mouliprasanth, "Effect of Flushing on Electrochemical Micromachining of Copper and Inconel 718 Alloy" presented in a International level conference on International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM 2018), organised by SSN College of Engineering Chennai, India from 15-Feb-2018 to 16-Feb-2018.
    10. P.Hariharan, C.S.Shamli, E.Rajkeerthi, H.Shruthilaya, Yuvaraj Natarajan, "Influence of Process Parameters on Electrochemical Micromachining of Nimonic 75 Alloy" presented in a International level conference on Influence of Process Parameters on Electrochemical Micromachining of Nimonic 75 Alloy, organised by International Mechanical Engineering Congress & Exposition of The Americal Society of Mechanical Engineers (ASME), Tampa, Florida, United States of America from 03-Nov-2017 to 09-Nov-2017.
    11. P. Hariharan, on 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016), organised by Department of Production Engineering and Industrial Management, College of Engineering Pune, India from 16-Dec-2016 to 18-Dec-2016.
    12. Ravi Raja Malar Vannan. R, Moorthy. TV, Hariharan. P & Prabhu. P, "Improvrment on High speed steel single point cutting tool using Physical vapour deposition coating process" presented in a International level conference on International conference on Mechanical, Materials and Manufacturing systems ICMMMS-2016, organised by Sri Sairam Engineering College, India from 24-Feb-2016 to 25-May-2016.
    13. Dadi Ravikanth, Manisha Mishra, P Hariharan, "Review on Haptics Technology and its Modeling, Rendering and Future Applications on Texture Identification " presented in a International level conference on International Conference on Man and Machine Interfacing (MAMI) 2015, organised by C. V. Raman College of Engineering, Bhubaneswar, India from 17-Dec-2015 to 19-Jul-2016.
    14. Hariharan.P, "Effect of variable magnetic field intensities on drilling micro holes Using electric discharge drilling" presented in a International level conference on International Conference on Precision, Meso, Micro and Nano Engineering, organised by IIT BOMBAY, INDIA from 10-Dec-2015 to 12-May-2016.
    15. Hariharan. P,"Effect of Grain Size in Surface finishing of Diamond Turning" presented in a International level conference on International Conference on Precision, Meso, Micro and Nano Engineering, organised by IIT BOMBAY, INDIA from 10-Dec-2015 to 12-Dec-2015.
    16. Karthic Kumar P.S, Keerthikeyan D, Seetharamkumar A, Vidhya M, Hariharan P and Deepak J, "Effect of Variable Magnetic Field in Micro Electric Discharge Drilling of AISI 316L Stainless Steel" presented in a International level conference on International Conference on Precision, Meso, Micro and Nano Engineering (COPEN9), organised by IIT BOMBAY, INDIA from 10-Dec-2015 to 12-Dec-2015.
    17. Sivaprakash.N, Mythreyi O.V, Deepak.J, Hariharan.P, "Effect of Variable Magnetic Field in Micro Electric Discharge Drilling of AISI 316L Stainless Steel" presented in a National level conference on Recent Trends in Manufacturing Technology 2015, organised by Anna University,, India from 16-Apr-2015 to 17-Apr-2015.
    18. Karuppiah.M, Hariharan.P, "Rotary magnetic field assisted micro electric discharge drilling" presented in a National level conference on Recent Trends in Manufacturing Technology, organised by Anna University, India from 16-Mar-2015 to 17-Mar-2015.
    19. Sivaprakasam P, Hariharan P ,Gowri S, "Modeling and analysis of micro wedm process on Inconel Super alloy through RSM" presented in a International level conference on 5th international &26th All India Manufacturing, organised by Department of Mechanical engineering ,Design and Research, India from 12-Dec-2014 to 15-Dec-2014.
    20. Hariharan.P, "Experimental investigation on machining performance of cryogenically treated electrodes in µEDM " presented in a International level conference on 4th International and 25th all India manufacturing Technology, design and research conference (AIMTDR 2012), organised by AIMTDR , India from 14-Dec-2012 to 16-Dec-2012.
    21. Hariharan. P,"Performance Study of rubber coated regulating wheel in centrless grinding" presented in a International level conference on 20th All India Manufacturing Technology Design and Research Conference, organised by Birla Institute of Technology, Mesra, India from 13-Dec-2002 to 15-Dec-2002.
    22. Hariharan. P,"Effects of cobalt -alloy coating bearing steel SAE 52100" presented in a National level conference on National conference on Recent Trends in Manufacturing Technology (RTMT’13), organised by Department of Manufacturing Engineering, Anna University, Chennai, India .
    23. Hariharan. P,"Design optimization of Process parameters in single point diamond turning of oxygen free high conducting copper" presented in a National level conference on National Conference on Recent Advances in Engineering (RAET ’ 12), Department of Mechanical Engineering, organised by Sri Muthukumaran Institute of Technology, Chennai, India .
    24. Hariharan. P,"Wear resistance study on nano stabilized Zirconia 8 YSZ coatings" presented in a National level conference on coatings’’National Conference on Innovations in Mechanical Engineering, organised by MITS Madanapalle, India
    25. Hariharan. P,"Optimization of process parameters in dry machining" presented in a National level conference on National conference on Innovations in Mechanical Engineering, organised by MITS Madanapalle, India
    26. Hariharan. P,"Microstructure evaluation in modified 9Cr-1Mo Steel during Long Term Thermal Exposure" presented in a International level conference on International Conference & Exhibition on Pressure Vessels and Piping, organised by OPE 2006 – Chennai, India
    27. Hariharan. P,"Robot with high resolution vision system for pick and place operation" presented in a International level conference on 22nd international Conference on CAD/CAM Robotics and Factories of the Future, organised by VIT, Vellore, India
    28. Hariharan.P, "Optimization of machining parameters in electrochemical micromachining using Taguchi method" presented in a International level conference on 22nd International Conference on CAD/CAM Robotics and Factories of the Future, organised by VIT, Vellore, India
    29. Hariharan. P,"Multi Objective optimization of Wire EDM process base on Taguchi method" presented in a International level conference on International Conference on Advances in Material processing and Characterisation, organised by College of Engineering Guindy, Anna University, Chennai, India
    30. Hariharan. P,"Experimental Investigation on Parametric Influence and Development of Analytical Model in Micro-turning" presented in a International level conference on International Conference on Advances in Material processing and Characterisation, organised by College of Engineering Guindy, Anna University, Chennai, India
    31. Hariharan. P,"Finite Element Analysis of Microturning of AISI 1045 Steel" presented in a International level conference on International Conference on Advanced Design and Manufacturing , organised by ICADM, India
    32. Hariharan. P,"Optimization of Ramp Up Period in Cryo-Treatment of AISI 51100 Bearing Steel" presented in a International level conference on International Conference on Advanced Design and Manufacturing, organised by ICADM, India
    33. Hariharan. P,"Laser Cutting of AISI301 Steel Plate: Optimization of Process Parameters on Surface Roughness and Slope of the Cut Edge" presented in a International level conference on International Conference on Advanced Design and Manufacturing , organised by ICADM, India
    34. Hariharan. P,"Parametric Optimizationa of Wire EDM Process for AISI 316 Stainless Steel" presented in a International level conference on International Conference on Advanced Design and Manufacturing, organised by ICADM, India
    35. Hariharan. P,"Multi response Optimization of CNC Wire Electrical Discharge Machining of 316LN Stainless Steel Using Taguchi Method" presented in a International level conference on International Conference on Advanced Design and Manufacturing, organised by ICADM, India
    36. Hariharan. P,"Development of G-BOP test and evaluation of hydrogen assisted cracking susceptibility of modified 9Cr-1Mo steel welds" presented in a International level conference on International Institute of Welding, organised by International Congress 2008, Chennai Trade Centre, Chennai, India
    37. Hariharan. P,"Manufacturing of Micro Electrodes using Hybrid Micro machining process" presented in a International level conference on International conference on Digital Factory (ICDF 2008), organised by Coimbatore Institute of Technology, Coimbatore, India
    38. Hariharan. P,"Preparation, Characterization and Mechanical Properties of Aluminium Matrix Nanocomposites" presented in a International level conference on Sixth International conference on Precision, Meso, Micro and Nano Engineering (COPEN-6), organised by PSG College of Technology, Coimbatore, India
    39. Hariharan. P,"A Review on various Research Trends in Micro EDM" presented in a International level conference on Sixth International conference on Precision, Meso, Micro and Nano Engineering (COPEN-6), organised by PSG College of Technology, Coimbatore, India
    40. Hariharan.P and Gowri.S, "Preparation of Nano-crystalline Al-Al2O3 composite by Ball Milling" presented in a International level conference on International conference on Emerging Research and Advances in Mechanical Engineering (ERA-09), organised by Velammal Engineering College, chennai, India
    41. Hariharan.P, "Micro holes fabrication using Micro Electric Discharge machining" presented in a International level conference on International conference on applied Mechanics, Materials and Manufacturing (ICAMMM2010), organised by Sultan Qaboos University, College of Engineering, Muscat-Oman, Oman
    42. Hariharan.P, "Optimization of Process Parameters in Micro-EDM of AISI 1080 steel using Gray Relational Analysis" presented in a International level conference on 3rd International and 24th All India Manufacturing Technology Design and Research Conference, organised by Andhra University College of Engineering, Andhra University, India
    43. Hariharan.P, "Modelling, simulation and parametric optimization of wire EDM process of Beryllium copper alloy" presented in a International level conference on International conference on advanced materials and processing, organised by ICAMP, India
    44. Hariharan.P and R.Krishnamurthy, "A study on drilling of polymeric nano composites by monitoring acoustic emission" presented in a International level conference on International conference on advanced materials and processing ICAMP, organised by ICAMP, India
    45. Hariharan.P, "Micro abrasive wear transitions analysis modes in ball-cratering test conducted on Fe based alloy coated specimen" presented in a International level conference on (ISRS2012), organised by IIT Madras, India
    46. Hariharan.P, "The Study on Tribology and Surface interface characterization of Fe based alloy coating deposited by HVOF method" presented in a International level conference on International conference on Modeling Optimization and Computing - (ICMOC-2012), organised by Noorul islam University, India
    47. Hariharan.P, "Formation and corrosion behavior of Fe based alloy coating deposited by HVOF method" presented in a International level conference on International conference on Recent advances in Mechanical Engineering (INCRAME-2012), organised by Dr.MGR Educational & Research Institure University, India
    48. Hariharan.P, "Experimental Determination of Machining Responses in Machining Austempered Ductile Iron" presented in a International level conference on International conference on Design and Manufacturing (ICONDM 2013), organised by IITD & M, Kancheepuram, Chennai, India
    49. Hariharan. P,"Effect of MgOand Y(NO3)3.6H2O onTransparency of Alumina" presented in a International level conference on International Conference on Science and innovative Enginnering, India
    50. Darinvel.KC and Hariharan.P, "effect of temperature on transparent alumina with MgO and Y(NO3)3.6H2O" presented in a International level conference on International Conference on Recent trends in Engineering and Technology, organised by Oxford College of Engineering, India
    51. Kumar KM & Hariharan P, "Experimental determination of thrust force, torque and surface roughness in machining Austempered Ductile Iron (ADI)" presented in a International level conference on International conference on Materials and Manufacturing science, organised by Dr. M.G.R Educational and Research Institute, Chennai, India
    52. Hariharan. P,"Welding of Similar and Dissimilar metals used in Railway coach Ball bearings" presented in a National level conference on UGC National Conference on Modeling and Simulation in Manufacturing, organised by Annamalai University, India
    53. Hariharan. P,"Interfacing Vision system with Robot for Pick and Place operation" presented in a National level conference on National Conference on Advances in Manufacturing Engineering, organised by Sona College of Technology, Salem, India
    54. Hariharan. P,"Automatic CNC code generation for Micromilling Machine" presented in a National level conference on National Conference on Advances in Manufacturing Engineering, organised by Sona College of Technology, Salem, India
    55. Hariharan. P,"Modeling and optimization of MRR in CNC WEDM using taguchi method" presented in a National level conference on National conference in emerging trends in engineering and technology, organised by Saintgits college of Engg, Kottayam, Kerala, India
    56. Hariharan. P,"Development of G-BOP (gapped - bead on plate) test and evaluation of cold cracking susceptibility of steel welds" presented in a National level conference on National conference on contemporary approaches in design and manufacturing, organised by ACCET, Karaikudi, India
    57. Hariharan. P,"Optimization of ramp up period in cryogenic treatment on AISI type D2 tool steel" presented in a National level conference on National conference on advances in manufacturing engineering, India
    58. Hariharan. P,"Optimization of wire electrical discharge machining parameters using taguchi method" presented in a National level conference on National Conference on Recent Trends in Manufacturing and Thermal Engineering, India
    59. Hariharan. P,"Development of G-BOP test and evaluation of hydrogen assisted cracking susceptibility of modified 9Cr-1Mo steel welds" presented in a National level conference on International Institute of Welding, International Congress 2008, organised by Chennai Trade Centre, Chennai, India
    60. Hariharan. P,"Preparation and Charaterization of Titanium nanoparticles by Ballmill process" presented in a National level conference on Emerging Trends in Engineering & Technology, organised by RajaRajeswari Engineering College, Adayalampattu, Chennai-95, India
    61. Hariharan. P,"Modeling of Aluminum flyash composite parameters in turning using artificial neural network" presented in a National level conference on National conference on advances in Mechanical sciences, organised by Kumaraguru college of Technology, Coimbatore, India
    62. Hariharan. P,"Manufacturing of Micro-electrode using micro machining process" presented in a National level conference on National conference on extreme on extreme engineering and technological advancements in mechanical sciences, organised by Jayam College of Engineering and Technology, Tharmapuri, India
    63. Hariharan. P,"Study on machining parameters of AISI H13 die steel in Wire EDM process" presented in a National level conference on Advancements in Manufacturing and Management system, organised by SaiRam Engineering College, Chennai, India
    64. Hariharan. P,"Synthesis of Carbon nanotubes using Fe-Mo bimetallic catalyst by CVD method" presented in a National level conference on National Conference on ‘Advancements in Manufacturing and Management Systems, organised by Sri Sairam Engineering College, Chennai, India
    65. Hariharan. P,"Study on Nuclear grade Inconal overlay welding" presented in a National level conference on National weld Meet 2008, organised by Vizg Steel, Visakhapatanam, India
    66. Hariharan. P,"Hard Turning of AISI M2 Die steel with Coated and Non-coated CBN inserts" presented in a National level conference on National Conference on Recent Trends in Manufacturing Technology (RTMT 09), organised by Anna University Chennai, India
    67. Hariharan. P,"Synthesis and Characterization of Aluminum Matrix Nano Composite" presented in a National level conference on National Conference on Recent Trends in Manufacturing Technology (RTMT 09), organised by Anna University Chennai, India
    68. Hariharan. P,"Optimization of Process Parameters in Wire Electrical Discharge Machining of Beryllium Copper Alloy" presented in a National level conference on National Conference on Recent Trends in Manufacturing Technology (RTMT 09), organised by Anna University Chennai, India
    69. Hariharan. P,"Synthesis and Characterization of Silica reinforced Bis-GMA Nano composite" presented in a National level conference on Emerging Trends in Engineering & Technology SNCETET-2009, organised by Rajarajeswari Engineering College, Chennai, India
    70. Hariharan. P,"Optimization of Machining Parameters in Micro-Turing" presented in a National level conference on National Conference on Design and Manufacturing (ACDAME09), organised by Dept. of Mechanical Engineering, GKM College of Engineering, Chennai 600 063, India
    71. Hariharan. P,"Optimization of Pick and Place Operation of Plasma Spray Piston rings" presented in a National level conference on National Conference on Design and Manufacturing (ACDAME09), organised by Dept. of Mechanical Engineering, GKM College of Engineering, Chennai 600 063, India
    72. Hariharan. P,"Circularity Analysis in Micro Electrical Discharge Machining of EN- 24 Die Steel" presented in a National level conference on 1st National Conference on Advances in Metrology, organised by CMTI, Bangalore, India
    73. Hariharan. P,"Evaluation of Delamination in Drilling of Nanoparticles Reinforced Epoxy Carbon Composite Laminates" presented in a National level conference on 1st National Conference on Advances in Metrology, organised by CMTI, Bangalore, India
    74. Hariharan. P,"Optimization of micro-EDM parameters to maximize the MRR of micro holes in AISI 1080 steel by Taguchi method" presented in a National level conference on National conference on Recent Trends in Manufacturing Technology (RTMT’11), organised by Department of Manufacturing Engineering, Anna University, Chennai, India
    75. Hariharan. P,"Optimization of micro-EDM parameters to minimize the surface roughness of micro holes in AISI 1080 steel by taguchi method" presented in a National level conference on National conference on Recent Advancements in Mechanical Engineering, organised by RAME’11, India
    76. Hariharan. P,"Optimization of machining parameters for surface finish in microturning of Stainless Steel AISI 304" presented in a National level conference on National conference on Recent Advances in Materials and Manufacturing Engineering (RAMM 2012), organised by Velammal Engineering College, Chennai, India
    77. Hariharan. P,"Edge -chipping reduction in micro rotary ultrasonic machining of borosilicate wafer by optimizing the parameters" presented in a National level conference on National Conference on Recent Trends in Mechanical Engineering (NCRTME-2012), organised by Department of Mechanical Engineering, Vels University, India
    78. Hariharan. P,"Optimization of Micro Wire Electric Discharge Machining : A Response Surface Approach" presented in a National level conference on National Conference on Micro and Nano Fabrication, organised by CMTI Bangalore , India
    79. Hariharan. P,"Thermo Electrical Modeling Of Micro EDM " presented in a National level conference on National conference on Recent Trends in Engineering and technology -RTET , organised by SVS College of Engineering ,Coimbatore, India
    80. Hariharan. P,"Acoustic emission analysis in drilling polymeric nano composite laminates using ANN Model" presented in a National level conference on National conference on Recent Trends in Manufacturing Technology (RTMT’13), organised by Department of Manufacturing Engineering, Anna University, Chennai, India

Organized

Sl.No. Title Type Level Role Duration
1 Advances in CAD/CAM for the benefit of teachers from Academic institutions and executives working in Industry Seminar National Coordinator 31-Dec-2019 to 31-Dec-2019
2 7th International and 28th All India Manufacturing Technology, Design and Research Conference 2018 Conference International Co Chairman 13-Dec-2018 to 15-Dec-2018
3 National Seminar on “Recent Trends in Manufacturing Technology (RTMT 2017) Seminar National Head of the Department 10-Mar-2017 to 11-Oct-2017
4 National Workshop on CNC Machines and Robotics - 2015 [CMR - 2015] Short Course National Coordinator 15-Jun-2015 to 19-Jun-2015
5 National Workshop on Application of Robots in Manufacturing Industry - 2015 [ARMI - 2015] Short Course National Coordinator 13-Jun-2015 to 14-Jun-2015
6 National Conference on Recent Trends In Manufacturing Technology Conference National Head of the Department 16-Apr-2015 to 17-Apr-2015
7 GIAN Course on Smart Manufacturing 1.0 Short Course National Course Co-ordinator 12-03-2018 to 16-03-2018
8 Friction stir processing of aluminium alloys and composites Workshop National Participation 05-03-2015
9 National Conference on Recent Trends in Manufacturing Technology (RTMT 13) conference National Coordinator 25-04-2013 To 26-04-2013
10 National workshop on Advanced Metrology in Manufacturing Engineering (AM2E) Workshop National Coordinator 03-10-2012 To 05-10-2012
11 National Conference on Recent Trends in Manufacturing Technology (RTMT 11) Conference National Coordinator 11-03-2011 To 12-03-2011
12 Recent Trends in Measurement and Inspection in Manufacturing Industries Short Course National Coordinator 26-09-2007 To 28-09-2007
13 Recent Trends in Measurement and Inspection in Manufacturing Industries Short Course National Coordinator 12-09-2007 To 14-09-2007
14 Computer Aided Manufacturing Short Course National Coordinator 03-09-2007 To 08-09-2007
15 Yoga for students and staff Short Course National Coordinator 20-08-2007 To 25-08-2007
16 Tooling for CNC Machines Short Course National Coordinator 03-08-2007 To 05-08-2007
17 CNC Machines and Programming Short Course National Coordinator 17-05-2007 To 20-05-2007
18 CNC Machines and Programming Short Course National Coordinator 10-05-2007 To 13-05-2007
19 Career guidance program for pre-final students of CEGC Short Course National Coordinator 10-03-2007 To 11-03-2007
20 Advances in CAD/CAM for the benefit of teachers from Academic institutions and executives working in Industry Seminar National Coordinator -
21 UGC sponsored training program for weaker students in the subject CNC Machines Short Course National Coordinator -

Chaired/Co Chaired

Sl.No. Title Type Level Role Institution Duration
1 Live webinar on "Best Practices of Critical Metrology Measurement" Seminar National Co Chairman AMETEK, Taylor Hobson 12-Jun-2020
2 7th International and 28th All India Manufacturing Technology, Design and Research Conference 2018 Conference International Co Chairman College of Engineering Guindy, Anna University, Chennai 13-Dec-2018 to 15-Dec-2018
3 International level workshop titled "Recent Materials for Healthcare & Industrial Applications (IWRM-2018) Workshop International Chairman Department of Medical Physics, Chemistry & Crystal Growth Centre, Anna University, Chennai 22-01-2018 To 23-01-2018
4 Third International Conference on Advances in Industrial Engineering Applications Conference International Chairman Department of Industrial Engineering, College of Engineering Guindy, Anna University, Chennai - 600 025 03-01-2018 To 05-01-2018
5 10th International Conference On Precision, Meso, Micro and Nano Engineering Conference International Chairman IIT Madras, Chennai 07-12-2017 To 09-12-2017
6 International Conference on "Recent Innovations in Production Engineering" (RIPE-2017) Conference International Chairman Dept. of Production TEchnology, Madras Institute of Technology, Anna University, Chennai -600044 24-03-2017 To 25-03-2017
7 International Conference on Materials, Design and Manufacturing Conference International Chairman Dept. of Mech. Engg., CEG Anna University, Chennai 17-02-2016 To 19-02-2016
8 International Conference on Materials, Design and Manufacturing Conference International Chairman Dept. of Mech. Engg., CEG Anna University, Chennai 17-02-2016 To 19-02-2016

Attended

Sl.No. Title Type Level Organising Institution Country Duration
1 Next Generation Electronic Systems : Heterogeneous Integration, Thermal and Power Management, Related Machine Learning Workshop International Binghamton University, State university of New York, US & IIT Madras and IIT Ropar, US and India Online workshop 06-Oct-2020 to 08-Oct-2020
2 21st century opportunities challenges and pathways to Industry 4.0 Seminar International Indian Welding Society India 16-07-2020
3 Stay ahead through Product Innovation and Design Thinking Short Course National R.M.K. Engineering College India 06-06-2020 to 06-06-2020
4 Webinar on " Intellectual Property Rights(IPR) and Patent Practices in India - Innovation & Research into Patents Seminar National Sri Sai Ram Institute Of Technology, Chennai India 11-05-2020
5 Two weeks online Faculty development program on "Managing online classes and co-creating MOOCS Workshop National Teaching Learning Centre, Ramanujan College, University of Delhi India 20-04-2020 to 06-05-2020
6 Indo-US workshop on Metal Additive Manufacturing Technology gaps and Research Directions Workshop National PSG Institute of Advanced Studies India 16-12-2019 to 18-12-2019
7 2 - Day Conclave on Engineering Education for Digital Transformation & Industry 4.0 Workshop National R.M.K. Engineering College, Kavaraipettai India 06-12-2019 to 07-12-2019
8 Five - Day ATAL Workshop on 3D Printing and Design Workshop National Centre for Faculty Development, Anna University, Chennai and Department of Manufacturing Engineering, Anna University, Chennai India 16-09-2019 to 20-09-2019
9 One Day National Workshop on e-Learning and MOOCs in Higher Education Workshop National Guru Angad Dev Teaching Learning Centre of MHRD, SGTB Khalsa College, University of Delhi and Anna University, Chennai India 14-09-2019 to 14-09-2019
10 Smart Manufacturing & Industry 4.0 Conference National Central Manufacturing Technology Institute, Bengaluru India 30-05-2019 to 31-05-2019
11 Recent Trends in Non-Destructive Evaluations and Manufacturing Processes (RETNEM - 2019) Workshop National Department of Production Technology, Madras Institute of Technology Campus, Anna University, Chennai - 44 India 25-04-2019 to 26-04-2019
12 Advances in Digital Additive Manufacturing : 3D Printing (ADAM-2019) Workshop National Annamalai University, Chidambaram India 04-01-2019 to 05-01-2019
13 Training on Disciplinary Procedures Short Course National Anna Institute of Management, Chennai 28 India 19-12-2018 to 21-12-2018
14 Two Days Workshop on The Essentials of IoT for Modern Mechanical Engineers Workshop National Department of Mechanical Engineering, College of Engineering Guindy, Anna University, Chennai - 600 025 India 15-02-2018 to 16-02-2018
15 One Day Awareness Workshop on Intellectual Property Rights 2018 (IPR 2018) Workshop National Centre for Intellectual Property Rights (CIPR), College of Engineering Guindy, Anna University, Chennai - 600 025 India 01-02-2018 to 01-02-2018
16 Influence of Process Parameters on Electrochemical Micromachining of Nimonic 75 Alloy Conference International International Mechanical Engineering Congress & Exposition of The Americal Society of Mechanical Engineers (ASME) United States of America 03-11-2017 To 09-11-2017
17 Workshop on Make in India - Transforming Research to Reality Workshop National Centre for Technology Development and Transfer, Anna University, Chennai, India India 05-09-2017 to 05-09-2017
18 Formulation of syllabus in Mechanical and Production Engineering in Diploma and Degree Standards Workshop National Tamil Nadu Public Service Commission, India India 14-03-2017 to 14-03-2017
19 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) Conference International College of Engineering, Pune, India India 16-12-2016 To 18-12-2016
20 GIAN Course on Micro and Nano Manufacturing Processes Short Course National IIT Madras, Chennai, India India 05-12-2016 To 10-12-2016
21 One Day Workshop on Smart Manufacturing Workshop National Indian Institute of Information Technology, Design and Manufacturing, (IIITDM) Kancheepuram, Chennai, India India 03-12-2016 To 03-12-2016
22 Intellectual Property Rights 2016 Workshop National Anna University, Chennai-25 India 26-04-2016 To 26-04-2016
23 Advances in CNC Programming and its Applications Workshop National University College of Engineering Kancheepuram, India India 22-03-2016 To 22-03-2016
24 Abrasive Waterjet Machining Process Seminar National Dept. of Manufacturing Engg., CEG, Anna University India 14-03-2015 To 14-03-2015
25 Two day National Workshop on CNC Machines and Programming Workshop National University College of Engineering - Dindigul, India India 20-08-2015 to 21-08-2015
26 Autodesk University (AU) India 2015 Education Summit Workshop National Autodesk India Private Limited, India India 06-08-2015 to 07-08-2015
27 Hands on Workshop on Diamond Turning for S&T, Industrial Applications Workshop National CSIR-CSIO-Chandigarh India 19-04-2015 To 21-04-2015
28 5th International & 26th All India Manufacturing Technology, Design and Research Conference AIMTDR 2014 Conference International Indian Institute of Technology-Guwahati India 12-12-2014 To 14-12-2014
29 International Colloquium on Material, Manufacturing and Metrology Conference International Indian Institute of Technology Madras India 08-08-2014 To 09-08-2014
30 National Conference on Recent Trends in Manufacturing Technology (RTMT 2013) Conference National Department of Manufacturing Engineering, Anna University, Chennai India 25-04-2013 To 26-04-2013
31 Advances in Non-Conventional Machining Processes Seminar National Dept. of Manufacturing Engg., CEG, Anna University India 22-02-2013 To 22-02-2013
32 4th International and 25th All India Research (AIMTDR) Conference National Department of Production Engineering, Jadavpur University, Kolkata India 14-12-2012 To 16-12-2012
33 Micromanufacturing AICTE & BARC sponsored STC Short Course National Micromanufacturing AICTE & BARC sponsored STC, IIT Kanpur India 05-11-2012 To 10-11-2012
34 Advanced Metrology in Manufacturing Engineering Workshop National Department of Manufacturing Engineering, Anna University, Chennai India 03-10-2012 To 05-10-2012
35 DST-PURSE sponsored two days workshop on Recent Research Trends in Advanced Engineering Materials and Composites and its Characterization Workshop National Department of Mechanical Engineering, Anna University, Chennai India 27-03-2012 To 28-03-2012
36 Issues in preparing Research Thesis and Project Proposal Workshop National Department of Industrial Engineering, Anna University, Chennai India 16-03-2012 To 17-03-2012
37 Automation and Computer Applications in Manufacturing Workshop National Department of Mechanical Engineering, IIT Madras India 06-02-2012 To 10-02-2012
38 Nano Coatings and Applications NANOCOAT 2011 Conference National Department of Manufacturing Engineering, Anna University, Chennai India 30-03-2011 To 31-03-2011
39 National conference on Recent Trends in Manufacturing Technology (RTMT 2011) Conference National Department of Manufacturing Engineering, Anna University, Chennai India 11-03-2011 To 12-03-2011
40 Indo-Canadian Workshop on Urban Electric System integration with PHEV Charging stations and solar farms Workshop International Anna University, Chennai & Ryerson University, Canada India 06-01-2011 To 07-01-2011
41 National workshop on Advances in Metrology & Measurements Workshop National Department of Manufacturing Engineering, Anna University, Chennai India 22-11-2010 To 23-11-2010
42 National Workshop on Nanomaterials and its applications NANOMAT 2010 Workshop National Department of Manufacturing Engineering, Anna University, Chennai India 20-09-2010 To 21-09-2010
43 Micro and Nano fabrication Conference National Department of Mechanical Engineering, IIT Kanpur India 22-03-2010 To 26-03-2010
44 Sixth International Conference on Precision, Meso, Micro and Nano Engineering COPEN 6 Conference International PSG College of Technology, Amrita University, Coimbatore & University of North Carolina, Charlotte, USA India 11-12-2009 To 12-12-2009
45 3rd SERC school in Micromachining Conference National Department of Mechanical Engineering, IIT Kanpur India 20-08-2009 To 25-08-2009
46 Indo-US seminar on research perspectives for university excellence : A US model for India Seminar National Department of Manufacturing Engineering & Centre for International Affairs, Anna University, Chennai India 10-08-2009 To 10-08-2009
47 National Conference on Recent Trends in Manufacturing Technology (RTMT 09) Conference National Department of Manufacturing Engineering, Anna University, Chennai India 06-03-2009 To 07-03-2009
48 Advanced International Workshop on Nano Science and Technology Workshop National Department of Physics, Anna University, Chennai India 23-02-2009 To 27-02-2009
49 Management development programme on R&D management Short Course National IIT Bombay India 20-09-2007 To 22-09-2007
50 International Conference on Advanced Design and Manufacturing ICADM 2007 Conference International Sethu Institute of Technology, Kariapatti, Madurai India 09-08-2007 To 11-08-2007
51 Workshop on CNC machining technology turning Workshop National ACE micromatic-LPM CNC technology center, Bangalore India 16-07-2007 To 21-07-2007
52 Technical training on Pneumatics Automation & Systems Short Course International SMC Australia Australia 19-03-2007 To 23-03-2007
53 International management development programme on "Standard rules and procedures of the world bank for procurement of goods, works and services Workshop International National Institute of Financial Management, Faridabad India 27-11-2006 To 08-12-2006
54 Welding technology and inspection, Indian Welding Society, Chennai Centre & Centre for Non-Destructive Evaluation Workshop National IIT-M India 03-11-2006 To 04-11-2006
55 International Conference on Advances in materials processing and characterization (AMPC 2006) Conference International College of Engineering Guindy, Anna University, Chennai India 28-08-2006 To 30-08-2006
56 International Conference on CAD/CAM Robotics and Factories of the Future CARs & FOF 2006 Conference International VIT, Vellore India 19-07-2006 To 22-07-2006
57 Failure Analysis of Industrial Components Short Course National IWS & IIT Madras India 06-02-2006 To 07-02-2006
58 International Conference on Manufacturing and Management Conference International Vellore Institute of Technology India 08-12-2004 to 10-12-2004
59 Modelling and Simulation of Manufacturing systems Short Course National NIT Trichy India 06-12-1999 to 17-12-1999
60 Manufacturing Engineering Short Course National Jadavpur University India 27-07-1999 to 14-08-1999
61 Standardization in Engineering Practise Short Course National Anna University India 04-02-1999 to 05-02-1999
62 Advanced Manufacturing Technology Short Course National Jadavpur University India 09-06-1997 to 21-06-1997

On Going

Sl.No. Project Title Project Type Principle Investigator / Co-Principal Investigator / Coordinator / Co-coordinator Funding Agency Project Status Amount Department Duration
1. Analysis and Application of Nano Thermal Barrier Coatings to reduce Heat Rejection of Heavy Duty Diesel Engine Research Co-Principal Investigator DRDO Ongoing Rs. 2,34,62,040/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 20-03-2019 to 19-03-2022
2. 5 Axis CNC Machine with Accessories Research Co-coordinator DST-FIST Level I Ongoing Rs. 1,52,00,000/- Department of Manufacturing Engineering, CEG, Anna University, Chennai 06-09-2018 to 05-09-2023

Completed

Sl.No. Project Title Project Type Principle Investigator / Co-Principal Investigator / Coordinator / Co-coordinator Funding Agency Project Status Amount Department Duration
1. DST-FIST LEVEL 0 Research Co-coordinator DST Completed 114 lakhs Department of Manufacturing Engineering, CEG, Anna University, Chennai 01-07-2009 to 30-06-2014
2. Flexible Manufacturing System Research Co-coordinator AICTE Completed 8 lakhs Department of Manufacturing Engineering, CEG, Anna University, Chennai -
3. Robotics and Manufacturing Automation Research Co-coordinator AICTE Completed 13 lakhs Department of Manufacturing Engineering, CEG, Anna University, Chennai -
4. International Virtual Laboratory in Mechatronics Research Co-coordinator European Union Completed 25 lakhs Department of Manufacturing Engineering, CEG, Anna University, Chennai 01-07-2005 to 31-12-2006
5. Technical Education Quality Improvement Programme (TEQIP) Infrastructure Co-coordinator World Bank (TEQIP) Completed 1280 lakhs Department of Manufacturing Engineering, CEG, Anna University, Chennai 01-01-2005 to 31-07-2006
6. Fabrication of Rapid Prototyping/3D Printing model for visual design Research Coordinator CTDT Anna university Completed 25000.00 Department of Manufacturing Engineering, CEG, Anna University, Chennai -

Details of Ph.D Scholars/MS (By Research) Students/M.E./M.Tech. Projects/M.Sc./M.Phil. Projects as Supervisor

Sl.No. Number of Guided Ongoing
1. Ph.D Scholars 11 8
2. MS (By Research) Students 1 -
3. M.E./M.Tech. Projects 100 3
4. M.Sc./M.Phil. Projects - -

Details of Ph.D Scholars/MS (By Research) Students/M.E./M.Tech. Projects/M.Sc./M.Phil. Projects as Joint Supervisor

Sl.No. Number of Guided Ongoing
1. Ph.D Scholars 3 2
2. MS (By Research) Students - 1
3. M.E./M.Tech. Projects - -
4. M.Sc./M.Phil. Projects - -

Details of scholars - Ongoing

Sl.No. Name of the Scholar Title Registration No. Status Capacity as Guide
1. Elumalai. B Electro Discharge Machining 1314219826 Ongoing Joint-Supervisor
2. Deepak. J Effect of flushing in Electro Chemical Micro Machining of SS304 1513219274 Ongoing Supervisor
3. Dadi Ravikanth Investigation on electrocutaneus stimulation for low frequency tactile application in haptic interfacing 1515219277 Ongoing Supervisor
4. Gopinath. R Effect of nano powder mixed dielectric on MEDM 1515219759 Ongoing Supervisor
5. Dinesh. T Fabrication and Characterization of Oil-toughened Epoxy Hybrid Composite 1513299872 Ongoing Joint-Supervisor
6. Rajkeerthi. E Study on Electrode tool shapes in Electro Chemical Micro Machining 16132197160 Ongoing Supervisor
7. Nitesh Krishnan. J Theoretical and experimental investigation of jet electrochemical machining 17132197130 Ongoing Supervisor
8. Bhavesh. G Effect of thermal cyclic life and hot corrosion behaviour of rare earth zirconate based thermal barrier coatings 1713297372 Ongoing Supervisor
9. Nagaraj. M Experimental investigation on effective thermal conductivity of exfoliated graphite fluoride copper mesh epoxy composite 18122197134 Ongoing Supervisor
10. Vinithra Banu. T Thermal Impact on Microstructure, Mechanical and Bio corrosion properties of Mg based Alloy with Nanocoatings for Biomedical Applications 20242191203 Ongoing Supervisor

Details of scholars - Completed

Sl.No. Name of the Scholar Title Registration No. Status Capacity as Guide
1. Paul Theophilus Rajakumar. I Online Monitoring of Drilling Carbon Fiber Reinforced Polymeric Nanocomposite Laminates using Acoustic Emission Technique 2007219166 Completed Supervisor
2. Jafferson. J.M Performance Improvement Strategies for Micro EDM 1014219113 Completed Supervisor
3. Sivaprakasam. P Modelling and Optimization of Micro Wire Electric Discharge Machining Process 2912219718 Completed Supervisor
4. Shunmuga Priyan. M Wear and Corrosion Studies On Iron-Based alloy powders deposited by HVOF Coating Method 1015219724 Completed Supervisor
5. Kadirvel. A Performance analysis and process optimization of micro EDM of Die Steel with different Electrodes 2714219721 Completed Supervisor
6. Ponnuvel. S Study on drilling of carbon nano tubes filled epoxy / Glass Fiber Composites 2919219108 Completed Joint-Supervisor
7. Ravi Raja Malarvanan. R Physical Vapour Deposition Coating on Tools 1014219719 Completed Joint-Supervisor
8. Kumar. K.M Machining Of Austempered Ductile Iron 1014219731 Completed Supervisor
9. Anand. S Study on wear behavior of GCI using various testing conditions 2913219739 Completed Joint-Supervisor
10. Mudhu Krishnan. M Fabrication and Machining of Fiber Reinforced Thermoplastic Composites 1015219701 Completed Supervisor
11. Saravana Kumar. P Drilling of carbon-carbon composite laminates 1014219126 Completed Supervisor
12. Chandrasekhara Sastry. C Experimental Investigations of Dry, Wet and cryogenic boring of HSLA ASTM A36 steel, AA7075 Aluminium Alloy and Gun Metal 17152191304 Completed Supervisor
13. Arun Pillai. K.V Performance Evaluation of Dielectric fluid in Micro Electrical Discharge Milling of Ti-6Al-4V Alloy 1214219119 Completed Supervisor
14. Mouli Prasanth. B Electrochemical Micromachining Studies on Nitinol and AISI 304 Stainless steel 16142197156 Completed Supervisor

Invited Lectures

Sl.No. Level Topic Programme Institution Place Date
1. National Applications of Micro Machining AICTE sponsored six days online Short Term Training Program (Phase-II) on Manufacturing Application R.M.K College Of Engineering and Technology Online 16-11-2020
2. National Micromachining Concepts & Applications Non Traditional Machining National Institute of Technical Teachers Training Online 05-11-2020
3. National Advanced Manufacturing Technology National workshop on Additive Manufacturing & Advanced Manufacturing Technologies Chennai Institute of Technology Online 12-10-2020
4. National Micromachining - Concepts & Applications FDP on "Trends in Manufacturing and Metrology" National Institute of Technical Teachers Training Online 15-09-2020
5. National Micromachining - Concepts & Applications FDP on Non Traditional Machining National Institute of Technical Teachers Training, Taramani Taramani 07-01-2020
6. National Micro electro mechanical systems (MEMS) National Conference - Durva 19 Layola Institute of Technology & Science Thovalai 28-08-2019
7. National Research opportunities in Micromachining Advances in Mechanical Engineering Research National Institute of Technology Manipur Manipur 05-08-2019
8. National Micromachining - Concepts & Applications Faculty Development Programme on "NON TRADITIONAL MACHINING" National Institute of Technical Teachers Training Taramani 26-09-2018
9. National Micromachining - Concepts & Applications Faculty Development Programme on "NON TRADITIONAL MACHINING " National Institute of Technical Teachers Training Taramani 20-09-2017
10. International Micromachining - Concepts & Applications Faculty Development Programme on "ADVANCED MANUFACTURING TECHNIQUES" National Institute of Technical Teachers Training Taramani 22-06-2017
11. National Micromachining - Concepts & Applications Faculty Development Programme on NON Traditional Machining National Institute of Technical Teachers Training Taramani 07-02-2017
12. National Micro-Machining - (Emerging Trends in Manufacturing Technology) TEQIP Sponsored Faculty Development Program National Institute of Technology, Tiruchirappalli Tiruchirappalli 27-09-2016
13. National Micromachining - Concepts & Applications Faculty Development Programme is to be organized on Advances in Manufacturing National Institute of Technical Teachers Training Chennai 30-08-2016
14. National Micro/Nano Manufacturing Process TEQIP II Sponsored one week value added course on Modern Manufacturing Systems Bharathidasan Institute of Technology (BIT) Campus Tiruchirappalli 24-07-2016
15. National MEMS and Micro Manufacturing Process TEQIP II Sponsored one week value added course on Modern Manufacturing Systems Bharathidasan Institute of Technology (BIT) Campus Tiruchirappalli 23-07-2016
16. National CNC Machines TEQIP II Sponsored one week value added course on Modern Manufacturing Systems Bharathidasan Institute of Technology (BIT) Campus Tiruchirappalli 23-07-2016
17. National CNC Machines TEQIP II Sponsored Two days Training Programe on Hands on Training on CNC Machines Bharathidasan Institute of Technology (BIT) Campus Tiruchirappalli 25-06-2016
18. National CNC Machines TEQIP II Sponsored Two days Training Programe on Hands on Training on CNC Machines Bharathidasan Institute of Technology (BIT) Campus Tiruchirappalli 24-06-2016
19. National Micromachining - Concepts & Applications Faculty Development Programme on NON Traditional Machining National Institute of Technical Teachers Training Taramani 02-02-2016
20. National Micromachining - Processes & Applications Faculty Development Programme on Advances Manufacturing Techniques National Institute of Technical Teachers Training Taramani 05-08-2015
21. National Micro - Manufacturing Short Term Course on Micro - Manufacturing National Institute of Technology, Tiruchirappalli Tiruchirappalli 15-03-2014

Details of Experience Abroad

Sl.No. Nature of Assignment Institution/Organization Country Funding Agency Duration
1. To present a paper in an International Conference, (ASME) International Mechanical Engineering Congress & Exposition of The Americal Society of Mechanical Engineers Tampa, Florida, United States of America Anna University, Chennai 03-11-2017 to 09-11-2017
2. India Education Exhibition 2016 - Dubai and Abu Dhabi - 20-01-2016 to 24-07-2016
3. India Education Exhibition 2015 - Oman Anna University 11-01-2015 to 14-01-2015
4. Educational Exhibition in Gulf Countries - Kuwait Anna University 24-01-2014 to 25-01-2014
5. To Visit various research labs in mechanical Engg. Dept. at national university at national university of singapore (NUS) National University of Singapore Singapore - 25-05-2013 to 25-05-2013
6. To explore possible collaborative research with University Malaysia, KL & University Sains malaysia, Penang KL & University Sains Malaysia Malaysia - 22-05-2012 to 24-05-2012
7. To participate in Gulf Education and Training Exhibition (GETEX) Gulf Training Exhibition Dubai - 14-04-2010 to 17-04-2010
8. To attend a training programme on Surface Mount Technology organized by M/s Flextronics M/s Flextronics Malaysia - 19-11-2007 to 27-11-2007
9. To visit Shanker College of Engineering on invitation Shanker College of Engineering Israel - 11-06-2007 to 18-06-2007
10. To attend a training programme SMC Pneumatics, Australia SMC Pneumatics Australia - 18-03-2007 to 25-03-2007
11. To attend the review meeting of European Union (EU) funded project on, "International Virtual Lab in Mechatronics European Union Germany - 16-06-2006 to 24-06-2006
12. To visit Precision Manufacturing Labs at National University of Singapore (NUS) and Nanyang Technological University (NTU) National University of Singapore Singapore - 14-05-2004 to 15-05-2004
13. To present a paper in an International Conference, ICAMT 2004 ICAMT Malaysia - 10-05-2004 to 13-05-2004
14. To deliver lecture on CAD/CAM to PG students of Katmandu University, Nepal Katmandu University Nepal - 18-05-2002 to 04-06-2002

Awards

Sl.No. Title of the Award Awarding Institution Country Awarded Year
1. Reviewer Alexandria Engineering Journal Egypt 2020
2. Certificate of Commemoration for successfully completing 25 years of unblemished service Anna University, Chennai India 2019
3. High impact research Publication 2016-17 College of Engineering Guindy, Anna University, Chennai India 2018
4. Certificate for project Work Guidance - First Prize Anna University - Sponsored by All India Manufacturers Organization India 1995

Representation in International/National/State Bodies

Sl.No. Level Body Capacity of representation Duration
1. International International Conference on Precision, Meso, Micro and Nano Reviewer -
2. International 7th International and 28th All India Manufacturing Technology Reviewer -
3. International International Conference on Emerging Trends in Mechanical Engineering Reviewer -
4. International Manufacturing Review Reviewer -
5. International Journal of Advanced Manufacturing Systems Reviewer -
6. International Journal of Composites Science Reviewer -
7. International Journal of Material engineering and performance Reviewer -
8. International Part C: Journal of Mechanical Engineering Science Reviewer -
9. International International Journal of Mechanical Sciences Reviewer -
10. International Material today-Proceedings Reviewer -
11. International International journal of advanced Manufacturing Reviewer -
12. International International journal of advanced Manufacturing Reviewer -

Patents Awarded

Sl.No. Patent Title Patent No Date Country
- - - - -

Patents Filed

Sl.No. Patent Title File No Date of Filing Country
1. Fin and Leaf Type Absorber in Flat Plate Solar Wat 2147483647 07-01-2021 India
2. Safety Measures for Passengers in Multi Axle Buses 2147483647 08-06-2020 India

Details of Books Published

Sl.No. Title of the Book Author CoAuthor 1 CoAuthor 2 Publisher Place of Publication Year of Publication
1. Manufacturing Technology Vol 1 Dr.S.Gowri Dr.P.Hariharan Dr.A.Suresh babu Oxford University Press New Delhi 2019
2. Manufacturing Technology I Dr.S.Gowri Dr.P.Hariharan Dr.A.Suresh babu Pearson Education Chennai 2008

Extension & Outreach Programmes

Sl.No. Type of the Programme Title of the Programme Role Cross Section of Participants No. of Participants Funded by Venue Duration
- - - - - - - - -